Are you looking for bearings, seals or supplies for your Puch? 
Here you will find our wide range of bearings, seals and parts for all Puch models such as Puch Maxi, Monza, Magnum X, Magnum, MV, VS, MS, DS. Choose from a complete revision set, bearings, seals, etc. Suitable for your Street, Race and Cross Puch. You will also find all necessities such as oil, tools for de-mounting bearings and much more!
Have you not found your part or do you have questions about a part? Contact us for a quick response!
Revision set Complete 4-Bearing Push-start / Pedal-start New Model Puch Maxi e50Revision set Complete 4-Bearing Push-start / Pedal-start New Model Puch Maxi e50
Complete revision set for Puch e50 Push-start / Pedal-start Engine 4-Bearing with a new model crankshaft.
∙ Liquid gasket (Red)
∙ ATF llD…€ 59,95
Revision set Complete 4-Bearing Push-start / Pedal-start Old Model Puch Maxi e50Revision set Complete 4-Bearing Push-start / Pedal-start Old Model Puch Maxi e50
Complete revision set for Puch e50 Push-start / Pedal-start Engine 4-Bearing with a old model crankshaft.
∙ Liquid gasket (Red)
∙ ATF llD…€ 57,95
Revision set Complete 4-Bearing Kickstart New Model Puch Maxi e50Revision set Complete 4-Bearing Kickstart New Model Puch Maxi e50
Complete revision set for Puch e50 Kickstart Engine 4-Bearing with a new model crankshaft.
∙ Liquid gasket (Red)
∙ ATF llD engine oil Eurol (250ml)
∙…€ 59,95
Revision set Complete 4-Bearing Kickstart Old Model Puch Maxi e50Revision set Complete 4-Bearing Kickstart Old Model Puch Maxi e50
Complete revision set for Puch e50 Kickstart Engine 4-Bearing with a old model crankshaft.
∙ Liquid gasket (Red)
∙ ATF llD engine oil Eurol (250ml)
∙…€ 57,95
Revision set Complete 3-Bearing Push-start / Pedal-start New Model Puch Maxi e50Revision set Complete 3-Bearing Push-start / Pedal-start New Model Puch Maxi e50
Complete revision set for Puch e50 Push-start / Pedal-start Engine 3-Bearing with a new model crankshaft.
∙ Liquid gasket (Red)
∙ ATF llD…€ 54,95
Revision set Complete 3-Bearing Push-start / Pedal-start Old Model Puch Maxi e50Revision set Complete 3-Bearing Push-start / Pedal-start Old Model Puch Maxi e50
Complete revision set for Puch e50 Push-start / Pedal-start Engine 3-Bearing with a old model crankshaft.
∙ Liquid gasket (Red)
∙ ATF llD…€ 52,95
Revision set Complete 3-Bearing Kickstart New Model Puch Maxi e50Revision set Complete 3-Bearing Kickstart New Model Puch Maxi e50
Complete revision set for Puch e50 Kickstart Engine 3-Bearing with a new model crankshaft.
∙ Liquid gasket (Red)
∙ ATF llD engine oil Eurol (250ml)
∙…€ 54,95
Revision set Complete 3-Bearing Kickstart Old Model Puch Maxi e50Revision set Complete 3-Bearing Kickstart Old Model Puch Maxi e50
Complete revision set for Puch e50 Kickstart Engine 3-Bearing with a old model crankshaft.
∙ Liquid gasket (Red)
∙ ATF llD engine oil Eurol (250ml)
∙…€ 52,95
Revision set 4 Bearing New Model Puch Maxi e50Revision set 4 Bearing New Model Puch Maxi e50
Complete revision bearing / seal set for Puch e50 Engine with a new model crankshaft.
∙ 3x SKF Bearing 6203C3.
∙ 1x SKF Bearing 6203 NR (Smaller inner ring)
∙ 3x 17 / 40 / 7…€ 34,95
Revision set 3 Bearing New Model Puch Maxi e50Revision set 3 Bearing New Model Puch Maxi e50
Complete revision bearing / seal set for Puch e50 3 bearing Engine with a new model crankshaft.
∙ 2x SKF Bearing 6203C3.
∙ 1x SKF Bearing 6203NR (Smaller inner ring)
∙ 3x 17 /…€ 29,95
Revision set 4-Bearing Old Model Puch Maxi e50Revision set 4-Bearing Old Model Puch Maxi e50
Complete revision bearing / seal set for Puch e50 Engine with a old model crankshaft.
∙ 3x NTN Bearing 6203C3.
∙ 1x NTN Bearing 6203NR.
∙ 2x 17 / 40 / 7 Seal.
∙ 1x 22 / 40 /…€ 32,95
Revision set 3 Bearing Old Model Puch Maxi e50Revision set 3 Bearing Old Model Puch Maxi e50
Complete revision bearing / seal kit for Puch E50 3 Bearing engines with a old model crankshaft.
∙ 2x NTN Bearing 6203C3.
∙ 1x NTN Bearing B203NR.
∙ 2x Seal 17 / 40 / 7.
∙…€ 27,95
Bearing / Seal set Crankshaft New Model Puch Maxi e50Bearing / Seal set Crankshaft New Model Puch Maxi e50
Crankshaft bearing / seal set for Puch e50 new model crankshaft.
∙ 1x SKF Bearing 6203C3.
∙ 1x SKF Bearing 6203 NR (Smaller inner ring)
∙ 2x Seal 17/40/7.
Suitable…€ 24,95
Bearing / Seal set Crankshaft Old Model Puch Maxi e50Bearing / Seal set Crankshaft Old Model Puch Maxi e50
Crankshaft bearing / seal set for Puch e50 old model crankshaft.
∙ 1x NTN Bearing 6203C3.
∙ 1x NTN Bearing 6203 NR.
∙ 1x Seal 17/40/7.
∙ 1x Seal 22/40/7.
Suitable…€ 17,95
Bearing / Seal set Main Gear 4 Bearing Puch Maxi e50Bearing / Seal set Main Gear 4 Bearing Puch Maxi e50
Complete Main gear bearing / seal set for Puch e50 4 bearing engines.
∙ 2x Bearing 6203C3 NTN.
∙ 1x Seal 17/40/7.
∙ 1x Snapring.
Suitable for:
∙ Puch Maxi e50 Engines.€ 11,50
Bearing / Seal set Main Gear 3 Bearing Puch Maxi e50Bearing / Seal set Main Gear 3 Bearing Puch Maxi e50
Complete Main gear bearing / seal set for Puch e50 3 bearing engines.
∙ 1x Bearing 6203C3 NTN.
∙ 1x Seal 17/40/7.
∙ 1x Snapring.
Suitable for:
∙ Puch Maxi e50 Engines.€ 7,50
Bearing 6203 C3 SKF 17mm x 40mm x 12mm Puch / Yamaha / Zündapp / Tomos / Honda / UniversalBearing 6203 C3 SKF 17mm x 40mm x 12mm Puch / Yamaha / Zündapp / Tomos / Honda / Universal
∙ Bearing.
∙ 6203 C3 SKF.
Measurements:
∙ Inner diameter: 17mm.
∙ Outer diameter: 40mm.
∙ Width: 12mm.
Suitable for:
∙…€ 5,50
Bearing Crankshaft Old Model 6203 NR NTN Puch Maxi e50Bearing Crankshaft Old Model 6203 NR NTN Puch Maxi e50
∙ Crankshaft bearing.
∙ Closed on both sides.
∙ Complete with ring.
∙ 6203 NR NTN.
Measurements:
∙ Outer diameter: 40mm.
∙ Inner diameter: 17mm.
∙ Width:…€ 8,95- Bearing Crankshaft Old Model 6203 NR C3 NTN Puch Maxi e50
Bearing Crankshaft Old Model 6203 NR C3 NTN Puch Maxi e50
∙ Crankshaft bearing.
∙ Closed on both sides.
∙ Complete with ring.
∙ 6203 NR C3 NTN.
Measurements:
∙ Outer diameter: 40mm.
∙ Inner diameter: 17mm.
∙…€ 9,95 - Bearing Crankshaft Old Model 6203 NR NSK Puch Maxi e50
Bearing Crankshaft Old Model 6203 NR NSK Puch Maxi e50
∙ Crankshaft bearing.
∙ Closed on both sides.
∙ Complete with ring.
∙ 6203 NR NSK.
Measurements:
∙ Outer diameter: 40mm.
∙ Inner diameter: 17mm.
∙ Width:…€ 8,95 
Bearing Crankshaft Old Model 6203 NR Closed Puch Maxi e50Bearing Crankshaft Old Model 6203 NR Closed Puch Maxi e50
∙ Crankshaft bearing.
∙ Closed on both sides.
∙ Complete with ring.
∙ 6203 NR.
Measurements:
∙ Outer diameter: 40mm.
∙ Inner diameter: 17mm.
∙ Width:…€ 8,95
Bearing 6203 C3 NTN 17mm x 40mm x 12mm Puch MaxiBearing 6203 C3 NTN 17mm x 40mm x 12mm Puch Maxi
∙ Bearing.
∙ 6203 C3 NTN.
Measurements:
∙ Inner diameter: 17mm.
∙ Outer diameter: 40mm.
∙ Width: 12mm.
Suitable for:
∙ Puch Maxi e50 (Crankshaft Left)
∙ Puch…€ 4,90
Seal Crankshaft NM & OM / Main Gear 17/40/7 NTN Puch Maxi e50Seal Crankshaft NM & OM / Main Gear 17/40/7 NTN Puch Maxi e50
∙ Seal crankshaft NM & OM / drive shaft.
∙ 17 / 40 / 7.
∙ NTN.
Measurements:
∙ Outer diameter: 40mm.
∙ Inner diameter: 17mm.
∙ Thickness: 7mm.
Suitable…€ 2,99
Seal Crankshaft Clutch side OM 22/40/7 NTN Puch Maxi e50Seal Crankshaft Clutch side OM 22/40/7 NTN Puch Maxi e50
∙ Seal crankshaft OM.
∙ 22 / 40 / 7.
∙ NTN.
Measurements:
∙ Outer diameter: 40mm.
∙ Inner diameter: 22mm.
∙ Thickness: 7mm.
Suitable for:
∙ Puch Maxi /…€ 2,99
Seal crankshaft NM and OM / main gear 17/40/7 A-Qaulity! Viton Puch Maxi E50Seal crankshaft NM and OM / main gear 17/40/7 A-Qaulity! Viton Puch Maxi E50
∙ Seal crankshaft NM and OM / drive shaft.
∙ 17 / 40 / 7.
∙ Required for Race engines!
∙ Extremely heat resistant!
∙ A-Qaulity!
∙…€ 6,90
Seal Crankshaft Clutch side OM 22/40/7 Viton A-Qaulity! Puch Maxi e50Seal Crankshaft Clutch side OM 22/40/7 Viton A-Qaulity! Puch Maxi e50
∙ Seal crankshaft OM.
∙ 22 / 40 / 7.
∙ Required for Race engines!
∙ Extremely heat resistant!
∙ A-Qaulity!
∙ Viton.
Measurements:
∙ Outer…€ 6,90
Seal Crankshaft NM & OM / Main Gear 17/40/7 KACO A-Qaulity! Puch Maxi e50Seal Crankshaft NM & OM / Main Gear 17/40/7 KACO A-Qaulity! Puch Maxi e50
∙ Seal crankshaft NM & OM / drive shaft.
∙ 17 / 40 / 7.
∙ Required for Race engines!
∙ A-Qaulity!
∙ KACO.
Measurements:
∙ Outer diameter:…€ 8,50
Seal Crankshaft Clutch side OM 22/40/7 KACO A-Qaulity! Puch Maxi e50Seal Crankshaft Clutch side OM 22/40/7 KACO A-Qaulity! Puch Maxi e50
∙ Seal crankshaft OM.
∙ 22 / 40 / 7.
∙ Required for Race engines!
∙ A-Qaulity!
∙ KACO.
Measurements:
∙ Outer diameter: 40mm.
∙ Inner diameter:…€ 8,50
Snapring Bearing Crankshaft / Main Gear Puch Maxi e50Snapring Bearing Crankshaft / Main Gear Puch Maxi e50
∙ Snap ring.
∙ Suitable for the 6203 NR crankshaft bearing.
∙ Also placed between bearing and seal on the main gear / drive shaft.
∙ A Piece.
Suitable for:
∙ Puch…€ 3,75
VDMRacing Needlebearing Clutch bell Puch e50VDMRacing Needlebearing Clutch bell Puch e50
∙ Needle bearing.
∙ Replacement part for the VDMRacing clutch bell and gears with needlebearing from our shop.
∙ Picture 2 is a example picture of the needlebearing in a…€ 16,90Top-Qaulity!
VDMRacing Bearing Bush Clutch bell Top-Qaulity! Puch e50VDMRacing Bearing Bush Clutch bell Top-Qaulity! Puch e50
∙ Bearing bush.
∙ Replacement part for the clutch bells and gears with bearing bush from the shop.
∙ Top-Qaulity!
∙ VDMRacing!
Suitable for:
∙ Puch Maxi e50…€ 24,90
Bearing Bush Brass Clutch bell Puch e50Bearing Bush Brass Clutch bell Puch e50
∙ Bearing bush.
∙ Brass.
∙ Replacement part for the clutch bells and gears with bearing bush from the shop.
∙ Picture 2 is a example picture of the bearing bush in a clutch…€ 2,95
Seal set Engine Old Model / New Model 5-Pieces Puch Maxi e50Seal set Engine Old Model / New Model 5-Pieces Puch Maxi e50
∙ Seal set.
∙ Set with all seals that are needed for the revision of a e50 engine with a old model or new model crankshaft.
∙ 5 Pieces.
Complete set with:
∙…€ 6,95
Seal set Engine Old Model 3-Pieces NTN Puch Maxi e50Seal set Engine Old Model 3-Pieces NTN Puch Maxi e50
∙ Sealset engine.
∙ For models with a old model cranksaft (Thickening on ignition side)
∙ 3 Pieces.
∙ NTN.
Complete set met:
∙ 1x Crankshaft Seal (17mm x 40mm x…€ 6,95
Seal set Engine New Model 3-Pieces NTN Puch Maxi e50Seal set Engine New Model 3-Pieces NTN Puch Maxi e50
∙ Sealset engine.
∙ For models with a new model cranksaft (Same thickness on both sides)
∙ 3 Pieces.
∙ NTN.
Complete set met:
∙ 1x Crankshaft Seal (17mm x 40mm x…€ 6,95
Seal set Engine Old Model 3-Pieces KACO A-Qaulity! Puch Maxi e50Seal set Engine Old Model 3-Pieces KACO A-Qaulity! Puch Maxi e50
∙ Seal set engine.
∙ Model with double lip.
∙ For models with a old model cranksaft (Thickening on ignition side)
∙ 3 Pieces.
∙ KACO, A-Qaulity!
Complete…€ 22,95
Seal set Engine New Model 3-Pieces KACO A-Qaulity! Puch Maxi e50Seal set Engine New Model 3-Pieces KACO A-Qaulity! Puch Maxi e50
∙ Seal set engine.
∙ Model with double lip.
∙ For models with a new model cranksaft (Same thickness on both sides)
∙ 3 Pieces.
∙ KACO,…€ 22,95
Seal set Engine Old Model 3-Pieces Viton A-Qaulity! Puch Maxi e50Seal set Engine Old Model 3-Pieces Viton A-Qaulity! Puch Maxi e50
∙ Seal set engine.
∙ Model with double lip.
∙ For models with a old model cranksaft (Thickening on ignition side)
∙ 3 Pieces.
∙ Viton,…€ 20,95
Seal set Engine New Model 3-Pieces Viton A-Qaulity! Puch Maxi e50Seal set Engine New Model 3-Pieces Viton A-Qaulity! Puch Maxi e50
∙ Seal set engine.
∙ Model with double lip.
∙ For models with a new model cranksaft (Same thickness on both sides)
∙ 3 Pieces.
∙ Viton,…€ 22,95
Seal set Crankshaft Old Model 2-Delig NTN Puch Maxi e50Seal set Crankshaft Old Model 2-Delig NTN Puch Maxi e50
∙ Sealset crankshaft.
∙ For models with a old model cranksaft (Thickening on ignition side)
∙ 2 Pieces.
∙ NTN.
Complete set met:
∙ 1x Crankshaft Seal (17mm x…€ 5,90
Seal set Crankshaft New Model 2-Delig NTN Puch Maxi e50Seal set Crankshaft New Model 2-Delig NTN Puch Maxi e50
∙ Sealset crankshaft.
∙ For models with a new model cranksaft (Same thickness on both sides)
∙ 2 Pieces.
∙ NTN.
Complete set met:
∙ 1x Crankshaft Seal (17mm x…€ 5,90
Seal set Crankshaft Old Model 2-Delig KACO A-Qaulity! Puch Maxi e50Seal set Crankshaft Old Model 2-Delig KACO A-Qaulity! Puch Maxi e50
∙ Sealset crankshaft.
∙ Model with double lip.
∙ For models with a old model cranksaft (Thickening on ignition side)
∙ 2 Pieces.
∙ KACO…€ 16,50
Seal set Crankshaft New Model 2-Delig KACO A-Qaulity! Puch Maxi e50Seal set Crankshaft New Model 2-Delig KACO A-Qaulity! Puch Maxi e50
∙ Sealset crankshaft.
∙ Model with double lip.
∙ For models with a new model cranksaft (Same thickness on both sides)
∙ 2 Pieces.
∙ KACO…€ 16,50
Seal set Crankshaft Old Model 2-Delig Viton A-Qaulity! Puch Maxi e50Seal set Crankshaft Old Model 2-Delig Viton A-Qaulity! Puch Maxi e50
∙ Sealset crankshaft.
∙ Model with double lip.
∙ For models with a old model crankshaft (Thickening on ignition side)
∙ 2 Pieces.
∙ Viton…€ 12,95
Seal set Crankshaft New Model 2-Delig Viton A-Qaulity! Puch Maxi e50Seal set Crankshaft New Model 2-Delig Viton A-Qaulity! Puch Maxi e50
∙ Sealset crankshaft.
∙ Model with double lip.
∙ For models with a new model cranksaft (Same thickness on both sides)
∙ 2 Pieces.
∙ Viton…€ 12,95
