VEC TV-2E electronic ignition coil

∙ Suitable for Puch Maxi and all Puch mopeds with 2, - 3, and 4. Geared motor.
∙ Also for Kreidler, Zündapp, Sachs, Hercules, Tomos with Bosch or Iskra ignitions.
∙ Suitable for 6v en…

Ignition coil Sport model as Bosch 2.0

∙ Ignition coil.
∙ Model 2.0.
∙ Model like Bosch (Replacement coil as original!)
∙ High voltage sport ignition coil for all Bosch ignitions.
∙ Very strong spark, even at low…

Ignition coil Sport model as Bosch 1.0

∙ Ignition coil.
∙ Model 1.0.
∙ Model like Bosch (Replacement coil as original!)
∙ High voltage sport ignition coil for all Bosch ignitions.
∙ Very strong spark, even at low…

Coil Original! 6 Volt Puch Maxi P1∙ Coil ignition.
∙ Original model, Top-Qaulity!
∙ 6 Volt.

Measurements:

∙ Distance between mounting holes CtC: 32mm.

Suitable for:

∙ Puch Maxi P1 Models.

Gilera Citta / Vespa Ciao / Vespa SI

Coil (PVL Inner rotor ignition)

∙ Coil for PVL Inner rotor ignition.

CDI unit Electronic Ignition

For Electronic Ignitions.

Coil for Puch (Model as Bosch)

∙ Coil model as Bosch.
∙ Puch Maxi S,N and MV, VS, DS, MS etc.
∙ Mounting hole distance: 54mm.

CDI Unit HPI inner rotor ignition

∙ CDI Unit.
∙ For HPI inner rotor ignition.

Flywheel nut (M10x1)

∙ Flywheel nut.
∙ M10x1.
∙ A Piece.

Reinforcement plate 350 Gram (HPI inner rotor ignition)

∙ Reinforcement plate.
∙ 350 Gram.
∙ Fits on a HPI inner rotor ignition.
∙ Easy to mount on the Rotor.
∙ For more mass on the Rotor.
∙ Stainless steel.

Bolt set HPI/PVL/Selettra inner rotor ignition

∙ M4.
∙ Fits in original Puch engines.

Bolt set Original ignition

∙ M4.
∙ Fits in original Puch engines.

Rotor (HPI Inner rotor ignition)

∙ Rotor unit for HPI Inner rotor ignition.

Stator/groundplate (HPI Inner rotor ignition)

∙ Stator/groundplate for HPI Inner rotor ignition.

Coil (HPI Inner rotor ignition)

∙ Coil for HPI Inner rotor ignition.

Coil bracket (HPI Inner rotor ignition)

∙ Coil bracket for HPI Inner rotor ignition.

Reinforcement plate 280 Gram (HPI 2-Ten ignition)

∙ Reinforcement plate.
∙ 280 Gram.
∙ Fits on a HPI 2-Ten ignition.
∙ Easy to mount on the Rotor.
∙ For more mass on the Rotor.
∙ Stainless steel.

CDI unit Kokusan ignition (6Volt/12Volt)

∙ For 6 volt and 12 volt Kokusan ignition.
∙ Also fits on a Puch P1.

Flywheel nut Kokusan ignition 14mm (M10X1)

∙ Flywheel nut.
∙ M10x1.
∙ Length:14mm.
∙ For Kokusan ignition.
∙ A Piece.

Ignition left turning Puch MV/MS/VS/DS Etc (6 Volt 17 Watt)

∙ Ignition.
∙ Left turning.
∙ Model as Bosch.
∙ 6 Volt.
∙ 17 Watt.

Suitable for:

∙ Puch MS50(V) (From +/- 1960)
∙ Puch VS50 (From +/- 1960)
∙ Puch…

Flywheel left turning ignition (Puch 4 gear)

∙ Flywheel.
∙ Left turning.
∙ For Puch 4 gear engines.

Suitable for:

∙ Puch Monza.
∙ Puch Grand Prix.
∙ Puch ZV50 (With wind cooled cylinder)
∙ Puch M50 Racing.

Flywheel left turning for models with forced cooling (Puch MV/MS/VS/DS Etc)

∙ Flywheel.
∙ Left turning.
∙ For Puch engines with forced cooling.

Suitable for:

∙ Puch MS50(V) (From +/- 1960)
∙ Puch VS50 (From +/-…

Ignition model Bosch right turning (6 Volt 17 Watt)

∙ Ignition.
∙ Model as Bosch.
∙ Right turning.
∙ 6 Volt.
∙ 17 Watt.

Suitable for:

∙ Puch Maxi.
∙ Zundapp.

Flywheel model Bosch right turning (M26x1.5)

∙ Flywheel.
∙ Model as Bosch.
∙ Right turning.
∙ For ignition with contact breaker points.
∙ M26x1.5.

Suitable for:

∙ Puch Maxi.
∙ Zundapp.

Ignition model Bosch right turning with brake light (6 Volt 15/5 Watt)

∙ Ignition.
∙ Model as Bosch.
∙ Right turning.
∙ 6 Volt.
∙ 15/5 Watt.
∙ With brake light.

Suitable for:

∙ Puch Maxi.
∙ Zundapp.
∙…

Mounting bolt/spring washer contact breaker points

∙ Mounting bolt/spring washer contact breaker points.
∙ To mount the contact breaker points on a original ignition groundplate.

Handlebar switch for CDI double curve HPI

∙ Handlebar switch.
∙ To use on HPI CDI units with double curve.

Flywheel collar nut increased (M10X1)

∙ Flywheel collar nut.
∙ Increased collar model.
∙ M10x1.
∙ A Piece.

Measurements:

∙ Wrench width:17mm.
∙ Heigth:15mm.
∙ Diameter collar:22mm.

Suitable for:

∙ Puch.

Groundplate model Bosch ignition

∙ Groundplate.
∙ Model Bosch ignition.
∙ Diameter:90mm.

Coil 6 Volt black Puch Maxi

∙ Coil.
∙ 6 Volt.
∙ Black.

Suitable for:

∙ Puch Maxi models.

CDI Unit (Double curve!) HPI inner rotor ignition

∙ CDI Unit.
∙ For HPI inner rotor ignition.
∙ With double curve!
∙ The curve can be changed with the HPI steering switch from the webshop.

CDI Unit (Double curve!) HPI 2-Ten ignition

∙ CDI Unit.
∙ For HPI 2-Ten ignition.
∙ With double curve!
∙ The curve can be changed with the HPI steering switch from the webshop.

Coil Top Performances Kokusan∙ Coil.
∙ Top Performances.
∙ Unlimited.
∙ For Kokusan ignition.
∙ Model with fixed curve.
∙ Length spark plug cable:50cm.

Coil replica 6 Volt Puch Maxi P1∙ Coil ignition.
∙ Replica model.
∙ 6 Volt.

Measurements:

∙ Distance between mounting holes CtC: 32mm.

Suitable for:

∙ Puch Maxi P1 Models.

Gilera Citta / Vespa Ciao / Vespa SI

Spacer extra coil Bosch ignition

∙ Spacer.
∙ To use for mounting a extra coil on the coil on the ignition.
∙ A Piece.

Measurements:

∙ Outer diameter:8mm.
∙ Inner diameter:4mm.
∙ Heigth:8mm.

Suitable for:

∙…

Ignition coil PVL replica model Bosch A-Qaulity Puch Maxi

∙ Ignition coil.
∙ PVL replica coil.
∙ Model as Bosch (Replacement coil as original)
∙ Mounting bolt distance:54mm.
∙ A-Qaulity!

Suitable for:

∙ Puch…

Ignition coil PVL replica model Bosch A-Qaulity Puch MV/VS/DS/Etc

∙ Ignition coil.
∙ PVL replica coil.
∙ Model as Bosch (Replacement coil as original)
∙ Mounting bolt distance:54mm.
∙ A-Qaulity!

Suitable for:

∙ Puch…

Contact breaker points (Bosch)

∙ Bosch.
∙ With wire.

Capacitor (With soldered connection Bosch)

Capacitor (With nut connection modell Ducati)

∙ Modell Ducati.
∙ modell with nut connection.

Light coil (6 Volt 15 Watt 1 wire)

∙ 1 Wire original Puch Maxi etc.
∙ 6 Volt.
∙ 15 Watt.
∙ 54mm mounting distance.

Voltage Regulator (5-pins 12 volt 100W Horn)

∙ For 12 volt.
∙ 100W.
∙ 5-pins.

Voltage Regulator (3-pins 12 volt)

∙ For 12 volt.
∙ 3-pins.

Voltage Regulator LED 3-pins alternating current (AC) 6 volt

∙ Always use this Voltage regulator with a LED bulb/lamp.
∙ For 6 volt.
∙ Alternating current (AC).
∙ 3-pins.

Light coil (12 Volt 35 Watt 1 wire)

∙ 1 Wire original Puch Maxi etc.
∙ Plug&Play remove the 6 Volt light coil and mount the 12 Volt light coil and you can use 12 volt light bulbs.
∙ 12 Volt.
∙ 35 Watt.
∙ 54mm mounting distance.

Voltage regulator HPI 2-Ten

∙ Voltage regulator for HPI 2-Ten ignition.

Contact breaker point kit (With cable)

Contact breaker point kit (With cable EFFE)

∙ EFFE.
∙ Top Quality.

Contact breaker point kit (Without cable)

Capacitor (With wire EFFE)

∙ EFFE.
∙ A1 quality.
∙ Model with wire.
∙ For Bosch and Ducati ignitions.

Capacitor (With nut)

∙ A1 quality.
∙ Model with nut.

Capacitor (With nut EFFE)

∙ A1 quality.
∙ Model with nut.

Capacitor (With soldered connection)

∙ A1 quality.

Capacitor (With soldered connection Bosch long)

∙ A1 quality.
∙ 30mm long.

Capacitor (With soldered connection EFFE)

∙ A1 quality.

Contact breaker point kit (Heavy duty Bosch)

∙ Bosch.
∙ Heavy duty.

Stator/groundplate PVL Inner rotor ignition)

∙ Stator/groundplate for PVL Inner rotor ignition.

Rotor (PVL Inner rotor ignition)

∙ Rotor unit for PVL Inner rotor ignition.

Rotor (MVT Inner rotor ignition)

∙ Rotor unit for MVT Inner rotor ignition.

CDI unit (MVT Inner rotor ignition)

∙ CDI unit for MVT Inner rotor ignition.

Coil (MVT Inner rotor ignition)

∙ Coil for MVT Inner rotor ignition.

Groundplate (MVT Inner rotor ignition)

∙ Groundplate for MVT Inner rotor ignition.

Capacitor (With nut connection Bosch)

Bolt set ignition coil-light coil

∙ M4.
∙ 2 Pieces.
∙ Bolt mounting set for the ignition coil and light coil.

HPI inner rotor light coil

∙ Suitable for all HPI inner rotor ignitions.
∙ This coil only supplies 12 volts and 10 watts of power!

Voltage regulator Kokusan ignition (12 Volt)

∙ For Kokusan ignition electronic.
∙ 12 Volt.

Voltage regulator Kokusan ignition (6 Volt)

∙ For Kokusan ignition electronic.
∙ 6 Volt.

Wiring harness with plug for voltage regulator 6 Volt / 12 Volt Kokusan ignition

∙ Wiring harness / wire loom.
∙ With plug for the voltage regulator.

Suitable for:

∙ For Kokusan ignition ( 6 Volt & 12 Volt model )

Ignition revision set

Complete set with:

∙ Ignition coil.
∙ Contact points.
∙ Capacitor.
∙ NGK spark plug cover.
∙ Spark plug cable (Thin)

Light coil Brakelight/Blinklight (6 Volt 5/15 Watt 2 cables)

∙ Light coil.
∙ 2 cables (For Brakelight, Blinklights etc.)
∙ 6 Volt.
∙ 5 and 15 Watt.
∙ Mounting distance:54mm.

Voltage regulator LED lamp

∙ Voltage regulator.
∙ For LED lamp/bulb.
∙ With double sided tape.
∙ AC Voltage.

Light coil model Bosch taillight (6 Volt 3 Watt 1 wire)

∙ Lightcoil.
∙ Model Bosch.
∙ Wire of this coil can be directly connected to the taillight to prevent burning out.
∙ 1 wire.
∙ 6 Volt.
∙ 3 Watt.
∙ 54mm mounting distance.

Rectifier universal small (AC->DC)

∙ Rectifier.
∙ To convert Alternating current (AC) into Direct current (DC)
∙ Universal.
∙ Small model.
∙ Type KBPC3508
∙ Ifsm (Peak current):400A
∙ Vf (Forward voltage):1.1V…

Light coil 6 Volt 35 Watt 1 wire

∙ Light coil.
∙ 1 wire as original Puch maxi etc.
∙ 6 Volt.
∙ 35 Watt.
∙ 54mm mounting distance.

Stator MVT inner rotor ignition

∙ Stator for MVT inner rotor ignition.

Adapter ring flywheel cover Kokusan ignition Puch e50

∙ Adapter ring flywheel cover.
∙ For mounting a flywheel cover on a Puch e50 engine with a Kokusan ignition.
∙ Grey model.
∙ Heat resistant plastic 3D Printed.
∙…

VDMRacing Adapter ring flywheel cover Kokusan ignition Top-Qaulity! Puch e50

∙ Adapter ring flywheel cover.
∙ For mounting a flywheel cover on a Puch e50 engine with a Kokusan ignition.
∙ Aluminium.
∙ Top-Qaulity!
∙…

Ignition coil Stefa - Bosch Old model Puch

∙ Ignition coil.
∙ Suitable for old model Stefa / Bosch ignition.

Measurements:

∙ Total length: 74mm.
∙ Mounting distance holes CtC: 52mm.

Suitable for:

∙ Puch Models from the 50´s

Coil bracket Stainless steel Universal

∙ Coil bracket.
∙ For mounting the Coil.
∙ Stainless steel.

Suitable for:

∙ Universal to use on various moped models.