Cylinder stud mounting set M6 (3D nuts)

∙ Cylinder stud mounting set for Puch Maxi e50 engine.
∙ Galvanized.
∙ M6x103mm.

Complete set with:

∙ 4x Cylinder studs.
∙ 4x M6 nuts extended 3D.
∙ 4x M6 rings.
∙ 2x…

Cylinder stud mounting set complete M6 (Collar nuts)

∙ Cylinder stud mounting set for Puch Maxi e50 engine.
∙ Galvanized.
∙ M6x103mm.

Complete set with:

∙ 4x Cylinder studs.
∙ 4x M6 collar nuts.
∙ 4x M6 nuts.
∙ 4x M6 rings.

Cylinder stud mounting set M6 (Collar nuts)

∙ Cylinder stud mounting set for Puch Maxi e50 engine.
∙ Galvanized.
∙ M6x103mm.

Complete set with:

∙ 4x Cylinder studs.
∙ 4x M6 collar nuts.

Cylinder stud mounting set M6 (3D nuts)

∙ Cylinder stud mounting set for Puch Maxi e50 engine.
∙ Galvanized.
∙ M6x103mm.

Complete set with:

∙ 4x Cylinder studs.
∙ 4x M6 nuts extended 3D.
∙ 4x M6 rings.

Stud crank case / cylinder 120mm M8 > M6 Puch

∙ Stud.
∙ To be used for mounting the cylinder on the engine.
∙ If the screw thread in the engine is broken, you can easily solve this with these adapter studs!
∙ Hardened…

Stud crank case / cylinder 116mm M7 > M6 Puch

∙ Stud.
∙ To be used for mounting the cylinder on the engine.
∙ If the screw thread in the engine is broken, you can easily solve this with these adapter studs!
∙ Hardened…

Stud crank case / cylinder 105mm M6 Puch

∙ Stud.
∙ To be used for mounting the cylinder on the engine.
∙ Hardened Qaulity!
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Length: 105mm.

Suitable for:

∙ Puch Engines.

Stud intake / exhaust 30mm M8 > M6 Puch

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ If the screw thread in the cylinder is broken, you can easily solve this with these adapter studs!
∙ Thread:1.25!
∙…

Stud intake / exhaust 30mm M8 > M6 Puch

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ If the screw thread in the cylinder is broken, you can easily solve this with these adapter studs!
∙ Galvanized!
∙ A…

Stud intake / exhaust 30mm M7 > M6 Puch

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ If the screw thread in the cylinder is broken, you can easily solve this with these adapter studs!
∙ Hardened…

Stud intake / exhaust 35mm M6 Puch

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ Hardened Qaulity!
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Length: 35mm.

Suitable for:

∙ Puch Engines.

Exhaust/intake studs set M6

∙ Exhaust/intake studs set.
∙ 2x Stud (M6)
∙ 2X Flange nut (M6)
∙ M6x32mm.

Suitable for:​

∙ Puch.

Stud mounting / demounting tool M7

∙ Stud mounting / demounting tool.
∙ To use for M7 studs.

How to use for mounting studs:

∙ Screw stud in tool .
∙ Lock stud by turning the allen bolt.
∙ Turn stud in cylinder, lock…

Stud mounting / demounting tool M7

∙ Stud mounting / demounting tool.
∙ To use for M7 studs.

How to use for mounting studs:

∙ Screw stud in tool .
∙ Lock stud by turning the allen bolt.
∙ Turn stud in cylinder, lock…

Stud repair set tool M6 > M7

∙ Screw thread repair set M6 > M7.
∙ To repair worn M6 tap holes with an M7 stud.
∙ Including 10 studs with a gradient of M7 > M6.
∙ Length Stud 32mm.
∙ Length M9 Thread 12mm.
∙ Length M8 Thread 20mm.

Stud repair set tool M8 > M9

∙ Screw thread repair set M8 > M9.
∙ To repair worn M8 tap holes with an M9 stud.
∙ Including 10 studs with a gradient of M9 > M8.
∙ Length Stud 35mm.
∙ Length M9 Thread 15mm.
∙ Length M8 Thread 20mm.