Needle bearing piston pin smallend Jasil 15 x 15 x 12 Puch models

∙ Needle bearing piston pin small end / crankshaft.
∙ For 12mm piston pin.
∙ 15 x 15 x 12.
∙ Jasil.

Measurements:

∙ Width: 15mm.
∙ Outer diameter:…

Needle bearing piston pin smallend 15 x 15 x 12 Puch models

∙ Needle bearing piston pin small end / crankshaft.
∙ For 12mm piston pin.
∙ 15 x 15 x 12.

Measurements:

∙ Width: 15mm.
∙ Outer diameter: 15mm.
∙ Inner…

Connection rod bush (14x12x12)

∙ For Puch e50 engines.
∙ For old model Connection rod.
∙ 14x12x12.

Bearing / seal set crankshaft (Old model) Puch Maxi e50

Crankshaft bearing / seal set for Puch e50 old model crankshaft.

∙ 1x NTN Bearing 6203C3.
∙ 1x NTN Bearing 6203 NR.
∙ 1x 17/40/7 Seal.
∙ 1X 22/40/7 Seal.

Suitable…

Bearing / seal set crankshaft (New model) Puch Maxi e50

Crankshaft bearing / seal set for Puch e50 new model crankshaft.

∙ 1x SKF Bearing 6203C3.
∙ 1x SKF Bearing 6203 NR (Smaller inner ring)
∙ 2x 17/40/7 Seal.

Suitable…

Connecting rod 16mm Big-end (Rito Race model)

∙ Connecting rod.
∙ For Puch e50 engines.
∙ Rito model.
∙ Fits on every crankshaft wit a 16mm Big-end.
∙ Top-Qaulity!

Measurements:

∙ Diameter Big-end:16mm.
∙ Top-end…

Connecting rod 14mm Big-end (Barikit)

∙ Connecting rod.
∙ For Puch e50 engines.
∙ Standard model.
∙ Barikit.

Measurements:

∙ Diameter Big-end:14mm.
∙ Top-end needlebearing:12x15x15mm.
∙ Length:34mm.

Connecting rod 14mm Big-end (Top Racing model)

∙ Connecting rod.
∙ For Puch e50 engines.
∙ Top Racing model.
∙ Silver cage Big-end needlebearing.
∙ Top-Qaulity!

Measurements:

∙ Diameter Big-end:14mm.
∙ Top-end…

Connecting rod 14mm Big-end (Italy model)

∙ Connecting rod.
∙ For Puch e50 engines.
∙ Made in Italy model.
∙ Top-Qaulity!

Measurements:

∙ Diameter Big-end:14mm.
∙ Top end needlebearing:12x15x15mm.
∙ Length:34.5mm.

Connecting rod 14mm Big-end (Standard model)

∙ Connecting rod.
∙ For Puch e50 engines.
∙ Standard model.

Measurements:

∙ Diameter Big-end:14mm.
∙ Top-end needlebearing:12x15x15mm.
∙ Length:34mm.

Crankshaft nut CM Puch MV/VS/Co 2 gear (M8x1)

∙ Crankshaft nut.
∙ For CM crankshaft 2 gear.
∙ Clutch nut M8x1.

Suitable for:

∙ Crankshaft CM Puch MV/VS/Co 2 gear hand and foot shift (Full round)
∙ Crankshaft CM Puch…

Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.1) Puch Models

∙ Shimwasher.
∙ 17x24x0.1.
∙ For shimming a crankshaft with L17 and BO17 bearings.
∙ A Piece.

Suitable for:

∙ Puch DS50R.
∙ Puch…

Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.2) Puch Models

∙ Shimwasher.
∙ 17x24x0.2.
∙ For shimming a crankshaft with L17 and BO17 bearings.
∙ A Piece.

Suitable for:

∙ Puch DS50R.
∙ Puch…

Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.3) Puch Models

∙ Shimwasher.
∙ 17x24x0.3.
∙ For shimming a crankshaft with L17 and BO17 bearings.
∙ A Piece.

Suitable for:

∙ Puch DS50R.
∙ Puch…

Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.5) Puch Models

∙ Shimwasher.
∙ 17x24x0.5.
∙ For shimming a crankshaft with L17 and BO17 bearings.
∙ A Piece.

Suitable for:

∙ Puch DS50R.
∙ Puch…

Shim washer for crankshaft with L17 and BO17 bearings (17x24x1.0) Puch Models

∙ Shimwasher.
∙ 17x24x1.0.
∙ For shimming a crankshaft with L17 and BO17 bearings.
∙ A Piece.

Suitable for:

∙ Puch DS50R.
∙ Puch…

Shim washer for crankshaft with L17 and BO17 bearings (17x24x1.5) Puch Models

∙ Shimwasher.
∙ 17x24x1.5.
∙ For shimming a crankshaft with L17 and BO17 bearings.
∙ A Piece.

Suitable for:

∙ Puch DS50R.
∙ Puch…