Electric heater 230V / 3500W workshop / garage

∙ Electric heater.
∙ 230 Volt / 3500 Watt.
∙ Model on base.
∙ 3 Settings with thermostat.
∙ Perfect for in your workshop / garage.
∙ With overhead protection!

Endoscope Led 2.4 Inch LCD screen

∙ Complete digital endoscope.
∙ Perfect for examining hard-to-reach areas in vehicles, workshops and in the home!
∙ Waterproof camera with a small diameter of 10mm.
∙ Integrated LED…

Graduated disc Polini 220mm (Ignition timing)

∙ Graduated disc / Degree timing.
∙ To use for ignition timing and settings.
∙ Diameter: 220mm.
∙ Polini.
∙ Original Polini article number:173.0003.

With various fixing…

First aid kit moped equipment

∙ First aid kit.
∙ Moped equipment.
∙ Conform to DIN13167 2014.

Complete set with:

∙ 1x adhesive plaster tape
∙ 4x adhesive plaster bandages (10 x 6cm)
∙ 2x water resistant…

Letter punches & Numbers punches 36 Pieces

∙ Letter & Numbers Punches.
∙ 5mm.
∙ 36 Pieces.
∙ Comes in plastic case.

Multitool (Convenient for travelling)

∙ Multitool.
∙ Convenient for travelling.
∙ Credit card size.

Complete with:

∙ Open end spanner (M2, M4, M6, M8, M10 and M12)
∙ Screwdriver.
∙ Ruler.
∙ Tin can opener.
∙…

Kneadable mix aluminium 56 gram

∙ Kneadble mix aluminium.
∙ 56 Gram.
∙ To use as a sealant, for example to fill holes scratches and abrasions in frames.
∙ Quick and easy to form.
∙ Suitable for drilling, tapping,…

Kneadable mix metal 56 gram

∙ Kneadble mix metal.
∙ 56 Gram.
∙ To use as a sealant, for example to fill holes scratches and abrasions in frames.
∙ Quick and easy to form.
∙ Suitable for drilling, tapping, sandblasting,…

Headset cone mounting set

∙ Headset cone mounting set.
∙ To easily place place steering head cones.
∙ Set with various most used sizes.
∙ Mounting tool.

Locking tool set 2nd gear MLM Puch ZA50

∙ Locking tool set.
∙ With this set you can lock the clutch to keep the crankshaft from rotating!
∙ Stainless steel.
∙ Top-Qaulity!
∙ MLM!

Driver tool seal and bearing MLM Puch ZA50

∙ Driver tool.
∙ Seals and bearing installer tool for Puch ZA50 engines.
∙ Also can be used for other mopeds to (Check out the dimensions on picture 3)
∙ Top-Qaulity!
∙ MLM!

Engine mount (Stainless steel)

∙ Engine mount.
∙ For Puch Maxi engines.
∙ Rotatable.
∙ Stainless steel.

Engine mount (For swivel vise)

∙ Engine mount for swivel vise
∙ For Puch Maxi engines.
∙ Steel.

Crankshaft support plate tool universal

∙ Crankshaft support plate.
∙ Tool.
∙ Steel plate to support the crankshaft when mounting the bearings.
∙ Suitable for all models of crankshaft, to keep the crankshaft from hitting…

Caliper digital (150mm)

∙ Caliper/Vernier.
∙ Digital.
∙ Range:150mm.
∙ Complete with box.

Caliper stainless steel (150mm)

∙ Caliper/Vernier.
∙ Stainless steel.
∙ Range:150mm.
∙ Complete with plastic box.

Bearing puller L17/E15 (Inner bearings)

∙ Bearing puller.
∙ For the bearings L17 and E15.
∙ For inner bearings.

Ball bearing puller set (Inner bearings)

∙ Ideal tool set for pulling bearings from housings.
∙ Set contains several attachments to pull out bearings with an inner diameter of 10 t/m 32mm.

Ball bearing puller kit (Outer bearings)

∙ Ideal for removing bearings from crankshafts etc.
∙ Ideal for Puch e50 engines.
∙ Set for large and small bearings.
∙ 30-50mm.

Slide puller set complete

∙ Slide puller set.
∙ Professional and complete set.
∙ For in and extern use with 2 or 3 hooks.
∙ To use as axle shaft, wheel hub, brake drum and bodywork puller.

Precision knive set 13-Pieces

∙ Precision knives.
∙ 13-Pieces.
∙ For example to use for cutting gaskets.

Pulley puller tool set (3-Pieces)

∙ Pulley puller tool set.
∙ 3-Pieces.

Measurements:

∙ 3-Arms 3 Inch.
∙ 3-Arms 4 Inch.
∙ 3-Arms 6 Inch.

Tyre plier 70cm universal

∙ Tyre plier.
∙ To easily remove tyres from the rim.
∙ 70cm.
∙ Universal.

Spraymaster Pro pistol grip Motip

∙ Pistol grip.
∙ Easy to mount on every Motip spray can.
∙ With this pistol grip you can paint easy.
∙ Motip.

Multimeter digital 70x125mm

∙ Multimeter.
∙ Digital.
∙ Including Dutch manual.
∙ Measures:CDV, ACV, DCA, hFE en Ohm.

Measurements:

∙ Heigth:125mm.
∙ Width:70mm.

Timing induction light (Ignition timing)

∙ Timing induction light.
∙ For adjusting the ignition timing.

Tool set (For on the road)

∙ Tool set.
∙ Useful for on the road.
∙ Universal.

Set consists of:

∙ Spark plug wrench (21mm)
∙ Screwdriver (Phillips/Flat)
∙ Plug wrench (10mm/13mm)
∙ Allen key (5mm)
∙ Black case.

Spark plug wrench Retro version

∙ Spark plug wrench.
∙ For 2-Stroke and 4-Stroke engines.
∙ Retro version.
∙ Universal.

Spark plug wrench (Strong version)

∙ Spark plug wrench.
∙ For 2-Stroke and 4-Stroke engines.
∙ Strong version.
∙ A-Qaulity!
∙ Universal.

Spark plug wrench (Lengthened model)

∙ Lengthened model.
∙ Length:115mm.
∙ To be used for the standard moped spark plug (21mm)
∙ Universal.

Spark plug wrench (Bracket model)

∙ To be used for the standard moped spark plug (21mm)
∙ Bracket model.
∙ Universal.

Spark plug wrench (Universal)

∙ To be used for the standard moped spark plug (21mm)
∙ Universal.

Spark plug wrench (T-Handle)

∙ To be used for the standard moped spark plug (21mm)
∙ T-Handle.
∙ Universal.

Circlip plier tool set (4-Pieces)

∙ Circlip plier tool set.
∙ 4-Pieces.
∙ 2 for inside circlips.
∙ 2 for outside circlips.
∙ Complete with a zip-pouch.

Chaintool heavy model

∙ Chaintool.
∙ Heavy model.
∙ Tool for shortening a chain.
∙ To use for 415 and 420 chains.
∙ Easy to use.

Chaintool medium model

∙ Chaintool.
∙ Medium model.
∙ Tool for shortening a chain.
∙ To use for 420 chains.
∙ Easy to use.

Chaintool

∙ Chaintool.
∙ Tool for shortening a chain.
∙ To use for 415 and 420 chains.
∙ Easy to use.

Chain tool (Pedal start chain)

∙ Tool for shortening your chain.
∙ Easy to use.

Clutch/Flywheel Lock key

∙ Clutch and flywheel Lock key.
∙ Adjustable.
∙ Universal.

Lock tool flywheel

∙ Lock wrench flywheel.
∙ You can use this tool to lock a original/replica Puch flywheel.

Clamp flywheel

∙ Clamp flywheel.
∙ To use for various flywheels.
∙ Usable up to a diameter of 120mm.
∙ Clamp is adjustable.

Piston pin pusher tool

∙ Piston pin pusher tool.
∙ Handy tool to remove the piston pin of a piston.
∙ Range up to 50mm pistons.
∙ To use for 10mm, 12mm en 14mm piston pin.
∙ Steel.

Puller disassemble clutch Adige Race kickstart Puch e50

∙ Puller clutch.
∙ Internal spring.
∙ To disassemble a Adige Race clutch.
∙ Adige Race.

*First the clutch shoes must be removed, then you can pull the clutch out of…

Clutch / inner rotor puller Buzzetti

∙ Clutch puller / inner rotor puller.
∙ To remove the clutch from a Puch e50 engine.
∙ Also to use for removing the inner rotor from a HPI or PVL ignition.
∙ Buzzetti.

Puller Clutch / Inner rotor Puch e50

∙ Puller Clutch / Inner rotor ignition.
∙ For disassembling the clutch of Puch e50 engines.
∙ Can also be used for disassembling an HPI and PVL flywheel rotor.

Suitable for:

∙ Puch…

Timing clock Polini

∙ Timing clock/Micrometer.
∙ To use for adjusting a (Inner rotor) ignition.
∙ Holder for spark plug hole (M14x1.25)
∙ Polini.

Timing clock digital

∙ Timing clock/Micrometer.
∙ To use for adjusting a (Inner rotor) ignition.
∙ Absolutely precise.
∙ Holder for spark plug hole (M14x1.25)

Micrometer

∙ Micrometer.
∙ To use for adjusting a (Inner rotor) ignition.
∙ Holder for spark plug hole (M14x1.25)

Flywheel puller (M26X1.5/M27X1.5 original ignition/Kokusan)

∙ M26X1.5/M27X1.5.
∙ For original ignition and kokusan flywheel.

Flywheel puller (M22X1.5/M26X1.5 original ignition/Kokusan)

∙ M22X1.5/M26X1.5.
∙ For original ignition and kokusan flywheel.

Flywheel puller (M27X1 HPI-2Ten)

∙ M27X1.
∙ Left hand thread.
∙ For example for HPI-2Ten.
∙ Buzetti.

Flywheel puller (M19x1 Kokusan)

∙ Flywheel puller for Kokusan ignitions.
∙ M19x1.

Stud mounting/demounting tool M6

∙ Stud mounting/demounting tool.
∙ To use for M6 studs.

How to use for mounting studs:

∙ Screw stud in tool .
∙ Lock stud by turning the allen bolt.
∙ Turn stud in cylinder, lock with…

Stud mounting/demounting tool M7

∙ Stud mounting/demounting tool.
∙ To use for M7 studs.

How to use for mounting studs:

∙ Screw stud in tool .
∙ Lock stud by turning the allen bolt.
∙ Turn stud in cylinder, lock with…

Screw pliers Unior (Remove studs)

∙ Screw pliers.
∙ For removing damaged screws(For example studs)
∙ Double toothed jaw.
∙ For screw heads with 3mm to 11mm.
∙ Length:170mm.
∙ Unior.

Cable pliers inner and outer cable

∙ Cable pliers.
∙ With this pliers you can easy cut inner cables and outer cables.

Chain link plier

∙ Chain link plier.
∙ For easily closing a chain link.

Side cutter (150mm)​

∙ 150mm.

Insulation Stripper (150mm)

∙ 150mm.

Combination plier (150mm)

∙ 150mm.

Nose plier bended (150mm)

∙ 150mm.

Nose plier (150mm)

∙ 150mm.

Groove plier (250mm)

∙ 250mm.

Piston stop tool (Plastic cap)

∙ To block the piston and loosening te crankschaft bolts.
∙ With Plastic cap.
∙ M14/70mm.

Piston stop tool

∙ To block the piston for loosening te crankschaft bolts.

*Attention! Be careful with this tool, it can cause damage to the piston!

Feeler gauge

∙ 0.05mm>1.00mm.

Thread pitch gauge Metric / Withworth 52-Pieces

∙ Thread pitch gauge.
∙ Metric 60 Degreed: From 0,25 to 6,00 mm.
∙ Withworth 55 Degrees: From 5 to 62 G.
∙ 52 Pieces.

Spring puller

∙ For exhaust springs or brake pads springs.

Brush set plastic 3-Pieces

∙ Brush set.
∙ Plastic handle.
∙ 3-Pieces.

Complete set with:

∙ Steel brush.
∙ Nylon brush.
∙ Brass brush.

Chain brush

∙ Chain brush.
∙ 250mm long.
∙ Double sided.

Valve removal tool aluminium Buzzetti

∙ Valve removal tool.
∙ Aluminium.
∙ Buzzetti.

Valve removal tool plastic

∙ Valve removal tool.
∙ Plastic.
∙ Red.

Spark plug brush

∙ smal model.

Gasket scraper stainless steel

∙ Gasket scraper.
∙ Stainless steel.
∙ 15mm.

Gasket scraper long handle

∙ Gasket scraper.
∙ With long handle.
∙ Length:28mm.
∙ Including 3 blades.

Gasket scraper

∙ For removal of old gasket residue.
∙ Blades are replaceable.

Gasket scraper blades 12x

∙ Also fit in Stanley knifes.
∙ 12 pieces.

Spark tester sparkplug cap universal

∙ Spark tester.
∙ Universal.
∙ You can test the spark through the sparkplug cap.
∙ To use with sparkplug caps with a big hole.

Spark tester sparkplug cable universal

∙ Spark tester.
∙ Universal.
∙ You can test the spark through the sparkplug cable.
∙ To use with sparkplug cables with a maximun diameter of 9mm.