Are you looking for a clutch, clutch bell or other supplies for your Puch?
Here you will find our wide range of clutches, clutch bells and clutch parts for all Puch models such as Puch Maxi, Monza, Magnum X, Magnum, MV, VS, MS, DS. Choose from a standard or Race clutch, clutch bells, pressure plates, sprockets, etc. Suitable for your Street, Race and Cross Puch. You will also find all necessities such as clutch parts, bearings, the needed tools and much more!
Have you not found your part or do you have questions about a part? Contact us for a quick response!
- VDMRacing Push-start / Pedal-start clutch bell Straight Cut Gears with needlebearing Top-Qaulity! Puch e50
VDMRacing Push-start / Pedal-start clutch bell Straight Cut Gears with needlebearing Top-Qaulity! Puch e50
∙ Clutch bell.
∙ Push-start / Pedal-start model.
∙ Model with Needlebearing.
∙ The gear is hardened.
∙ Suitable…€ 149,00 - VDMRacing Kickstart clutch bell Straight Cut Gears with needlebearing Top-Qaulity! Puch e50
VDMRacing Kickstart clutch bell Straight Cut Gears with needlebearing Top-Qaulity! Puch e50
∙ Clutch bell.
∙ Kickstart model.
∙ Model with Needlebearing.
∙ The gear is hardened.
∙ Suitable for the VDMRacing Straight Cut…€ 149,00 - VDMRacing KTM SX50 clutch bell Straight Cut Gears with needlebearing Top-Qaulity! Puch e50
VDMRacing KTM SX50 clutch bell Straight Cut Gears with needlebearing Top-Qaulity! Puch e50
∙ Clutch bell.
∙ Clutch bell for KTM SX50 clutch.
∙ Model with Needlebearing.
∙ The gear is hardened.
∙ Suitable for the…€ 149,00 - VDMRacing Push-start / Pedal-start clutch bell Straight Cut Gears Top-Qaulity! Puch e50
VDMRacing Push-start / Pedal-start clutch bell Straight Cut Gears Top-Qaulity! Puch e50
∙ Clutch bell.
∙ Push-start / Pedal-start model.
∙ The gear is hardened.
∙ Suitable for the VDMRacing Straight Cut Gears from our…€ 129,00 - VDMRacing Kickstart clutch bell Straight Cut Gears Top-Qaulity! Puch e50
VDMRacing Kickstart clutch bell Straight Cut Gears Top-Qaulity! Puch e50
∙ Clutch bell.
∙ Kickstart model.
∙ The gear is hardened.
∙ Suitable for the VDMRacing Straight Cut Gears from our shop.
∙ Straight Cut Gears.
∙…€ 129,00 - VDMRacing KTM SX50 clutch bell Straight Cut Gears Top-Qaulity! Puch e50
VDMRacing KTM SX50 clutch bell Straight Cut Gears Top-Qaulity! Puch e50
∙ Clutch bell.
∙ Clutch bell for KTM SX50 clutch.
∙ The gear is hardened.
∙ Suitable for the VDMRacing Straight Cut Gears from our shop.
∙ Straight…€ 129,00 - VDMRacing Push-start / Pedal-start clutch bell 19 Teeth / 21 Teeth Top-Qaulity! Puch e50
VDMRacing Push-start / Pedal-start clutch bell 19 Teeth / 21 Teeth Top-Qaulity! Puch e50
∙ Clutch bell.
∙ Push-start / Pedal-start model.
∙ Stronger and Lighter as a original clutch bell.
∙ Choice out of 19 and 21…€ 72,95 - VDMRacing Kickstart engine clutch bell 19 Teeth / 21 Teeth Top-Qaulity! Puch e50
VDMRacing Kickstart engine clutch bell 19 Teeth / 21 Teeth Top-Qaulity! Puch e50
∙ Clutch bell.
∙ Kickstart model.
∙ Stronger and Lighter as a original clutch bell.
∙ Choice out of 19 and 21 teeth.
∙ Top-Qaulity!
∙…€ 72,95 - VDMRacing KTM SX50 clutch bell 19 Teeth / 21 Teeth Top-Qaulity! Puch e50
VDMRacing KTM SX50 clutch bell 19 Teeth / 21 Teeth Top-Qaulity! Puch e50
∙ Clutch bell.
∙ Clutch bell for KTM SX50 clutch.
∙ Stronger and Lighter as a original clutch bell.
∙ Choice out of 19 and 21 teeth.
∙…€ 72,95 - Pressure plate set clutch kickstart complete Puch e50
Pressure plate set clutch kickstart complete Puch e50
∙ Pressure plate set.
∙ Complete set that is mounted on the clutch of a Puch e50 kickstart engine.
Complete set met:
∙ Pressure plate.
∙ Sprocket.
∙ Spring…€ 44,50 - Pressure plate clutch kickstart Puch e50
Pressure plate clutch kickstart Puch e50
∙ Pressure plate.
∙ This part is mounted on the clutch of a Puch e50 kickstart engine.
Suitable for:
∙ Puch Maxi e50 kickstart engines.€ 11,50 - Sprocket clutch kickstart Puch e50
Sprocket clutch kickstart Puch e50
∙ Sprocket.
∙ This part is mounted on the clutch of a Puch e50 kickstart engine.
Suitable for:
∙ Puch Maxi e50 kickstart engines.€ 30,95 - Nut + Spring washer clutch kickstart M10 Puch e50
Nut + Spring washer clutch kickstart M10 Puch e50
∙ Nut + Spring washer.
∙ Mounting set to mount the clutch of a Puch e50 kickstart engine.
Suitable for:
∙ Puch Maxi e50 kickstart engines.€ 3,40 - Nut clutch kickstart M10 Puch e50
Nut clutch kickstart M10 Puch e50
∙ Nut.
∙ Nut to mount the clutch of a Puch e50 kickstart engine.
∙ A Piece.
Suitable for:
∙ Puch Maxi e50 kickstart engines.€ 2,95 - Spring washer clutch kickstart M10 Puch e50
Spring washer clutch kickstart M10 Puch e50
∙ Spring washer.
∙ Spring washer to mount the clutch of a Puch e50 kickstart engine.
∙ A Piece.
Suitable for:
∙ Puch Maxi e50 kickstart engines.€ 0,50 - Pressplate clutch bell Push-start / Pedal-start original Surflex Puch e50
Pressplate clutch bell Push-start / Pedal-start original Surflex Puch e50
∙ Clutch bowl / Pressure plate.
∙ Orginal model.
∙ Complete with pin.
∙ This part is placed in the clutch bell and is secured with a circlip.
∙…€ 29,50 - Pressplate clutch bell Push-start / Pedal-start as original Puch e50
Pressplate clutch bell Push-start / Pedal-start as original Puch e50
∙ Clutch bowl / Pressure plate.
∙ Model as original.
∙ Complete with pin.
∙ This part is placed in the clutch bell and is secured with a…€ 13,95 - Pressplate clutch bell Push-start / Pedal-start Race Puch e50
Pressplate clutch bell Push-start / Pedal-start Race Puch e50
∙ Clutch bowl / Pressure plate.
∙ Race model (Lighter as original model)
∙ Weight: 107.9 Gram.
∙ Complete with pin.
∙ This part is placed in the clutch bell…€ 14,95 - Circlip pressplate clutch bell Push-start / Pedal-start Surflex Puch e50
Circlip pressplate clutch bell Push-start / Pedal-start Surflex Puch e50
∙ Circlip.
∙ This part secures the pressure plate / clutch bowl in the clutch bell of a Puch e50 Push-start / Pedal-start engine.
∙ Orginal Puch!
∙…€ 5,50 - Pin pressplate with bearing clutch Push-start / Pedal-start Puch e50
Pin pressplate with bearing clutch Push-start / Pedal-start Puch e50
∙ Stift.
∙ Complete with bearing.
∙ This part is placed in the pressure plate / clutch bowl of a Puch e50 Push-start / Pedal-start engine.
Suitable…€ 5,90 - Axial bearing pin pressplate clutch Push-start / Pedal-start Puch e50
Axial bearing pin pressplate clutch Push-start / Pedal-start Puch e50
∙ Axial bearing.
∙ This part is placed in the pressure stift of a Puch Maxi e50 Push-start / Pedal-start engine.
Suitable for:
∙ Puch Maxi e50…€ 4,99 - Circlip pin pressplate clutch Push-start / Pedal-start Puch e50
Circlip pin pressplate clutch Push-start / Pedal-start Puch e50
∙ Circlip.
∙ This part secures the pin on the pressure plate / clutch bowl of a Puch e50 Push-start / Pedal-start engine.
∙ A Piece.
Measurements:
∙ Outer…€ 0,35 - Nut + Spring washer clutch push-start / pedal-start M10 Puch e50
Nut + Spring washer clutch push-start / pedal-start M10 Puch e50
∙ Nut + Spring washer.
∙ Mounting set to mount the clutch of a Puch e50 push-start / pedal-start engine.
Suitable for:
∙ Puch Maxi e50 push-start /…€ 1,30 - Nut clutch Push-start / Pedal-start engine M10 Puch e50
Nut clutch Push-start / Pedal-start engine M10 Puch e50
∙ Nut.
∙ Nut to mount the clutch of a Puch e50 Push-start / Pedal-start engine.
∙ A Piece.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start engines.€ 0,99 - Spring washer clutch Push-start / Pedal-start engine M10 Puch e50
Spring washer clutch Push-start / Pedal-start engine M10 Puch e50
∙ Spring washer.
∙ Spring washer to mount the clutch of a Puch e50 Push-start / Pedal-start engine.
∙ A Piece.
Suitable for:
∙ Puch Maxi e50 Push-start /…€ 0,35 - Mounting set clutch bell / clutch Push-start / Pedal-start 11-Pieces Puch e50
Mounting set clutch bell / clutch Push-start / Pedal-start 11-Pieces Puch e50
∙ Mounting set clutch bell / clutch.
∙ This set contains all the parts to mount the clutch bell / clutch in a Puch e50 Push-start / Pedal-start…€ 7,95 - Shim washer assortiment set 30 pieces Puch e50
Shim washer assortiment set 30 pieces Puch e50
∙ Shim washer assortiment set.
∙ Set for adjusting the clutch bell of Puch e50 engines and for the kickstart axle.
∙ 30 Pieces.
Complete set with:
∙ 2x Shim washer…€ 16,95 - Cirlip front side clutch bell Puch e50
Cirlip front side clutch bell Puch e50
∙ Circlip.
∙ Front side (Clutch side)
∙ This part secures the clutch bell on the crankshaft of a Puch e50 Push-start / Pedal-start and Kickstart engines.
∙ A…€ 0,25 - Cirlip rear side clutch bell Puch e50
Cirlip rear side clutch bell Puch e50
∙ Circlip.
∙ Rearside (Behind clutch bell)
∙ This part secures the clutch bell on the crankshaft of a Puch e50 Push-start / Pedal-start and Kickstart engines.
∙ A…€ 0,25 - Shim washer front side clutch bell Puch e50
Shim washer front side clutch bell Puch e50
∙ Shim washer.
∙ Front side (Clutch side)
∙ Set for adjusting the clutch bell of Puch e50 engines and for the kickstart axle.
∙ A Piece.
Measurements:
∙ Outer diameter:…€ 0,89 - Shim washer rear side clutch bell Puch e50
Shim washer rear side clutch bell Puch e50
∙ Shim washer.
∙ Rear side (Clutch side)
∙ Set for adjusting the clutch bell of Puch e50 engines and for the kickstart axle.
∙ A Piece.
Measurements:
∙ Outer diameter:…€ 0,89 - VDMRacing Needlebearing clutch bell old model Puch e50
VDMRacing Needlebearing clutch bell old model Puch e50
∙ Needle bearing.
∙ Old model ( This needlebearing is suitable for the older VDMRacing clutch bells)
∙ Replacement part for the VDMRacing clutch bell and gears with…€ 12,95 - VDMRacing Needlebearing clutch bell Puch e50
VDMRacing Needlebearing clutch bell Puch e50
∙ Needle bearing.
∙ Replacement part for the VDMRacing clutch bell and gears with needlebearing from our shop.
∙ Picture 2 is a example picture of the needlebearing in a…€ 16,90 Top-Qaulity!
VDMRacing Bearing bush clutch bell Top-Qaulity! Puch e50VDMRacing Bearing bush clutch bell Top-Qaulity! Puch e50
∙ Bearing bush.
∙ Replacement part for the clutch bells and gears with bearing bush from the shop.
∙ Top-Qaulity!
∙ VDMRacing!
Suitable for:
∙ Puch Maxi e50…€ 24,90- Bearing bush brass clutch bell Puch e50
Bearing bush brass clutch bell Puch e50
∙ Bearing bush.
∙ Brass.
∙ Replacement part for the clutch bells and gears with bearing bush from the shop.
∙ Picture 2 is a example picture of the bearing bush in a clutch…€ 3,20 - Bearing bush brass clutch bell Puch Z50 / X30 Velux
Bearing bush brass clutch bell Puch Z50 / X30 Velux
∙ Bearing bush.
∙ Brass.
∙ Replacement part for the bearing bush of a Puch Z50 clutch bell.
Measurements:
∙ Total length: 16.3mm.
∙ Outer diameter: 17mm.
∙ Inner…€ 11,50 - Bearing bush clutch bell Puch MV / VS / MS
Bearing bush clutch bell Puch MV / VS / MS
∙ Bearing bush.
∙ Replacement part for the clutch bell bearing bush of a Puch 2, 3 and 4 gear engine.
∙ Precisely fitting!
Measurements:
∙ Total length: 16.2mm.
∙ Outer…€ 7,50 - Jasil clutch push-start Puch Maxi e50
Jasil clutch push-start Puch Maxi e50
∙ Clutch.
∙ Super as replacement of your original clutch, not for racing use!
∙ 3 Segments.
∙ Comes with 3 sets of 1.5 mm, 1.6 mm and 1.7 mm springs (diameter of the spring wire) The…€ 116,95 - VDM KTM SX50 clutch Puch e50
VDM KTM SX50 clutch Puch e50
∙ VDM KTM SX50 clutch.
∙ Top-Qaulity!
∙ Plug&play with the sprocket and clutch bell from the webshop in Puch e50 kickstart engines.
∙ The clutch can be used in Puch e50 push-start engines but…€ 298,00 - Clutch Adige Race kickstart Puch e50
Clutch Adige Race kickstart Puch e50
∙ Clutch.
∙ with internal spring.
∙ Can only be disassembled with the special clutch puller from the shop (See related products below)
∙ Adige Race.
Complete set met:
∙ Race…€ 59,00 - Clutch 3 segments Race! Push-start / Pedal-start Puch e50
Clutch 3 segments Race! Push-start / Pedal-start Puch e50
∙ Clutch.
∙ Super plug & play clutch for beter performance.
∙ Suitable for street, cross and race use!
∙ With 2x Clutch spring sets 50N/mm & 100N/mm.
∙…€ 198,95 - Clutch 3 segments Race! Kickstart Puch e50
Clutch 3 segments Race! Kickstart Puch e50
∙ Clutch.
∙ Super plug & play clutch for beter performance.
∙ Suitable for street, cross and race use!
∙ With 2x Clutch spring sets 50N/mm & 100N/mm.
∙ Reinforced with a…€ 198,95 - VDMRacing Clutch Strengthened Race Push-start / Pedal-start Puch e50
VDMRacing Clutch Strengthened Race Push-start / Pedal-start Puch e50
∙ Clutch.
∙ Race / Sport model.
∙ 3 Segments.
∙ Reinforced with a reinforcement ring!
∙ Lightened segments!
∙ Original Qaulity!
∙ Plug & Play!
∙…€ 99,95 - VDMRacing Clutch Strengthened Race Kickstart Puch e50
VDMRacing Clutch Strengthened Race Kickstart Puch e50
∙ Clutch.
∙ Race / Sport model.
∙ 3 Segments.
∙ Reinforced with a reinforcement ring!
∙ Lightened segments!
∙ Original Qaulity!
∙ Plug & Play!
∙ With 3…€ 99,95 - Clutch DMP Streetpro Race Push- / Pedal-start Puch Maxi e50
Clutch DMP Streetpro Race Push- / Pedal-start Puch Maxi e50
∙ Clutch.
∙ Race / Sport model.
∙ 3 Segments.
∙ Reinforced with a reinforcement ring!
∙ Plug & Play!
∙ With 3 strenghts springs: Blue, Yellow and Red.
3…€ 79,95 - Clutch 3 segments Push-start / Pedal-start Puch e50
Clutch 3 segments Push-start / Pedal-start Puch e50
∙ Clutch.
∙ Push-start / Pedal-start model.
∙ Model as original.
∙ 3 Segments.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start engines.€ 39,95 - Clutch 3 segments Kickstart Puch e50
Clutch 3 segments Kickstart Puch e50
∙ Clutch.
∙ Kickstart model.
∙ Model as original.
∙ 3 Segments.
Suitable for:
∙ Puch Maxi e50 Kickstart engines.€ 41,95 - Clutch conversion set Race! Puch e50
Clutch conversion set Race! Puch e50
∙ Clutch conversion set.
∙ Super replacement set for your original clutch for beter performance.
∙ Suitable for street, cross and race use!
∙ Kevlar lining!
∙ 3 Segment clutch.
∙…€ 159,95 - Puller Clutch / Inner rotor Puch e50
Puller Clutch / Inner rotor Puch e50
∙ Puller Clutch / Inner rotor ignition.
∙ For disassembling the clutch of Puch e50 engines.
∙ Can also be used for disassembling an HPI and PVL flywheel rotor.
Suitable for:
∙ Puch…€ 7,95 - VDM KTM SX50 clutch plate Puch e50
VDM KTM SX50 clutch plate Puch e50
∙ VDM KTM SX50 clutch plate.
∙ Top-Qaulitty!
∙ Fits with the original Puch e50 kickstart sprocket.
∙ The clutch can be used in Puch e50 push-start engines but needs to be started with a…€ 99,00 - Segment set clutch KTM SX50 3 Pieces Top-Qaulity!
Segment set clutch KTM SX50 3 Pieces Top-Qaulity!
∙ Segment set.
∙ To use with the VDMRacing KTM SX50 clutches and suitable for a KTM SX50 offcourse)
∙ Original KTM SX50!
∙ Top-Qaulity!
∙ 3 Pieces.€ 134,00 - Segment clutch KTM SX50 Top-Qaulity!
Segment clutch KTM SX50 Top-Qaulity!
∙ Segment.
∙ To use with the VDMRacing KTM SX50 clutches and suitable for a KTM SX50 offcourse)
∙ Original KTM SX50!
∙ Top-Qaulity!
∙ A Piece.€ 44,95 - Disc spring set clutch KTM SX50
Disc spring set clutch KTM SX50
For KTM SX50 clutches for better adjustment options than the original springs.
Complete kit with:
∙ 3 Bolts.
∙ 3 Bushes.
∙ 42 Disc springs.
∙ 6 x 0.3mm Shim washers.
∙ 6 x 0.5mm Shim…€ 59,00 - Spring set clutch KTM SX50
Spring set clutch KTM SX50
For KTM SX50 clutches.
Complete kit with:
∙ 3 Bolts.
∙ 3 Bushes.
∙ 3 Springs.
∙ 6 Shim washers.€ 59,00 - Segment set clutch 3 segments Puch e50
Segment set clutch 3 segments Puch e50
∙ Segment / shoe set.
∙ Model as original.
∙ 3 Segments.
Suitable for:
∙ Puch e50 Push-start / Pedal-start and kickstart engines.€ 18,90 - Segment set Jammer 6.4 Race clutch Puch e50
Segment set Jammer 6.4 Race clutch Puch e50
∙ Segment set.
∙ 3 Pieces.
∙ Weight segment: 28 Gram.
∙ Pay attention! Before assembly, soak the clutch in clutch oil for at least 6 hours!
∙ Jammer V6.4 Race.
Suitable…€ 72,00 - Segment set clutch Adige Race kickstart Puch e50
Segment set clutch Adige Race kickstart Puch e50
∙ Segment set.
∙ Suitable for Adige Race clutch.
∙ Adige Race.
Suitable for:
∙ Puch Maxi e50 Kickstart engines.€ 34,50 - Spring clutch Adige Race kickstart Puch e50
Spring clutch Adige Race kickstart Puch e50
∙ Clutch spring.
∙ Internal spring.
∙ Total length: 146mm.
∙ Suitable for Adige Race clutch.
∙ Adige Race.
Suitable for:
∙ Puch Maxi e50 kickstart motoren.€ 7,90 - Puller disassemble clutch Adige Race kickstart Puch e50
Puller disassemble clutch Adige Race kickstart Puch e50
∙ Puller clutch.
∙ Internal spring.
∙ To disassemble a Adige Race clutch.
∙ Adige Race.
*First the clutch shoes must be removed, then you can pull the clutch out of…€ 13,90 - Clutch first gear Puch ZA50
Clutch first gear Puch ZA50
∙ Clutch.
∙ 1st gear.
Suitable for:
∙ Puch ZA50 engine.€ 92,95 - Clutch second gear Puch ZA50
Clutch second gear Puch ZA50∙ Clutch.
∙ Second Gear.
Suitable for:
∙ Puch ZA50 engine.€ 92,95 - Clutch set reinforced +70% Puch Z50
Clutch set reinforced +70% Puch Z50
∙ Clutch set.
∙ Reinforced (+70%)
∙ Swiing.
Suitable for:
∙ Puch Z50 engine.€ 132,95 - Clutch plate set Surflex original hardened Puch MV / VS / DS / Z50 / X30
Clutch plate set Surflex original hardened Puch MV / VS / DS / Z50 / X30
∙ Clutch plate set.
∙ 2 Pieces.
∙ Original Puch.
∙ Hardened!
∙ Surflex.
Suitable for:
∙ Puch Z50.
∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch Velux X30.€ 24,50 - Clutch plate set Surflex Original Puch MV/VS/DS/Z50/X30
Clutch plate set Surflex Original Puch MV/VS/DS/Z50/X30
∙ Clutch plate set.
∙ 2 Pieces.
∙ Original Puch.
∙ Surflex.
Suitable for:
∙ Puch Z50.
∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch Velux X30.€ 22,50 - Clutch plate set Puch MV / VS / DS / Z50 / X30
Clutch plate set Puch MV / VS / DS / Z50 / X30
∙ Clutch plate set.
∙ 2 Pieces.
Suitable for:
∙ Puch Z50.
∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch Velux X30.€ 6,95 - Clutch plate Puch MV / VS / DS / Z50 / X30
Clutch plate Puch MV / VS / DS / Z50 / X30
∙ Clutch plate.
∙ A Piece.
Suitable for:
∙ Puch Z50.
∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch Velux X30.€ 3,50 - Intermediate clutch plate Steel 12-Pins Puch 4 Gear / Z50 / Monza / Grandprix
Intermediate clutch plate Steel 12-Pins Puch 4 Gear / Z50 / Monza / Grandprix
∙ Intermediate clutch plate.
∙ Unclothed.
∙ Steel.
∙ Model with 12 pins.
∙ A Piece.
Suitable for:
4 Gear engines (New models)
∙ Puch…€ 5,75 - Intermediate clutch plate Steel 6-Pins Puch 2 / 3 / (4) Gear
Intermediate clutch plate Steel 6-Pins Puch 2 / 3 / (4) Gear
∙ Intermediate clutch plate.
∙ Unclothed.
∙ Steel.
∙ Model with 6 pins.
∙ A Piece.
Suitable for:
2 and 3 Gear engines.
4 Gear engines (Old models)
∙…€ 5,75 - Tension bearing clutch extra Reinforced! Puch Z50 / 2 / 3 Gear
Tension bearing clutch extra Reinforced! Puch Z50 / 2 / 3 Gear
∙ Tension bearing / pull bearing clutch.
∙ Extra Reinforced version!
∙ For models with 2 clutch plates.
∙ Screw thread: M10x1.
∙ Bearing housing with oil…€ 73,95 - Tension bearing clutch extra Reinforced! Puch 4 Gear / R-Engine
Tension bearing clutch extra Reinforced! Puch 4 Gear / R-Engine
∙ Tension bearing / pull bearing clutch.
∙ Extra Reinforced version!
∙ Screw thread: M10x1.
∙ Bearing housing with oil holes for extra oil supply!
∙ With…€ 73,95 - Tension bearing clutch A-Qaulity! A.M.W Puch Z50 / 2 / 3 Gear
Tension bearing clutch A-Qaulity! A.M.W Puch Z50 / 2 / 3 Gear
∙ Tension bearing / pull bearing clutch
∙ A-Qaulity!
∙ A.M.W.
Suitable for:
2 and 3 Gear engines.
∙ Puch Z50 2-Speed.
∙ Puch Velux.
∙ Puch MS.
∙ Puch…€ 29,95 - Tension bearing clutch A.M.W A-Qaulity Puch 4 Gear / R-Engine
Tension bearing clutch A-Qaulity A.M.W Puch 4 Gear / R-Engine
∙ Tension bearing / pull bearing clutch.
∙ A-Qaulity!
∙ A.M.W.
Suitable for:
4 Gear and R-Engines.
3 Gear engines with 3 clutch plates.
∙ Puch Maxi…€ 29,95 - Tension bearing clutch Puch Z50 / 2 / 3 Gear
Tension bearing clutch Puch Z50 / 2 / 3 Gear
∙ Tension bearing / pull bearing clutch.
∙ For Puch 2 and 3 gear engines.
Suitable for:
∙ Puch Z50.
∙ Puch MS.
∙ Puch VS.
∙ Puch MV.
∙ Puch VS50D.
∙ Puch DS50 (3…€ 17,90 - Tension bearing clutch Puch 4 Gear
Tension bearing clutch Puch 4 Gear
∙ Tension bearing / pull bearing clutch.
∙ B-Qaulity.
Suitable for:
3 Gear engines with 3 clutch plates.
4 Gear engines.
∙ Puch VZ50-4.
∙ Puch DS50R.
∙ Puch DS50-4.
∙ Puch MC50…€ 19,90 - Shift Dampers (ZA50 engine)
Shift Dampers (ZA50 engine)
∙ Voor Puch ZA50 motor.
∙ Top Qaulity!
∙ Beter Qaulity as original.€ 11,50 - Shift Dampers Extra stiff (ZA50 engine)
Shift Dampers Extra stiff (ZA50 engine)
∙ Voor Puch ZA50 motor.
∙ Top Qaulity!
∙ These shift dampers are a lot stiffer than the red shift dampers, because of this they are better suited for high performance engines like…€ 16,50 - Spring clutch strengthened +70% Puch Z50 / 2 / 3 Gear
Spring clutch strengthened +70% Puch Z50 / 2 / 3 Gear
∙ Spring clutch.
∙ Strengthened (+70%)
∙ Suitable for tuned engines.
Suitable for:
∙ Puch Z50 engines.
∙ Puch 2 and 3 Gear engines.€ 29,95 - Spring clutch strengthened +50% Puch Z50 / 2 / 3 Gear
Spring clutch strengthened +50% Puch Z50 / 2 / 3 Gear
∙ Spring clutch.
∙ Strengthened (+50%)
∙ Suitable for tuned engines.
Suitable for:
∙ Puch Z50 engines.
∙ Puch 2 and 3 Gear engines.€ 29,95 - Spring clutch MV / VS / DS / VZ / Z50 / Monza / Etc
Spring clutch MV / VS / DS / VZ / Z50 / Monza / Etc
∙ Spring clutch.
∙ 39mm x 22mm.
Suitable for:
∙ Puch Z50 engine.
∙ Puch MV50.
∙ Puch MS50 (L)
∙ Puch MS50V.
∙ Puch VS50.
∙ Puch DS50.
∙ Puch VZ50.
∙ Puch…€ 9,95 - VDMRacing Gear clutch bell 19 Teeth Puch e50
VDMRacing Gear clutch bell 19 Teeth Puch e50
∙ Gear clutch bell.
∙ Gear to press or weld in a clutch bell.
∙ Ideal as a replacement part or to use for a project!
∙ To be used with a 96 Teeth main gear ( Lookrelated…€ 34,95