Headset bearing set complete Puch Maxi S

∙ Headset bearing set.
∙ Complete set with all the parts you need for mounting the front fork in the frame.

Suitable for:

∙ Puch Maxi S.
∙ Models with handlebar mounting on the…

Headset bearing set complete Puch Maxi N

∙ Headset bearing set.
∙ Complete set with all the parts you need for mounting the front fork in the frame.

Suitable for:

∙ Puch Maxi N.
∙ Models with a handlebar with a handle bar stem.

Front fork mounting set A-Qaulity! Buzzetti Puch Maxi S / N / P / K / X30 / Rider Macho / P1 / Z-Two / Etc

∙ Front fork / headset assembly set.
∙ Mounting set required for mounting the front fork in the frame.
∙…

Front fork mounting set Puch Maxi S / N / P / K / X30 / Rider Macho / P1 / Z-Two / Etc

∙ Front fork / headset assembly set.
∙ Mounting set required for mounting the front fork in the frame.

Complete set with:

∙ 2x Bearing…

Swiing Headset bearing set (Puch Maxi S/N/X30)

∙ For Puch Maxi S/N/X30.
∙ Swiing!
∙ Complete set.
∙ Hardened.
∙ Suitable for Race use.
∙ Top-Qaulity!
∙ Inner diameter lower bearing ring:26.8mm.
∙ Outer diameter of…

Balhead set Puch MV/MS/VS

∙ Balhead set.
∙ Complete set.
∙ 5mm ballbearings.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.

Balhead ballbearing set Puch MV/MS/VS (144 Pieces)

∙ Balhoofd kogellager set.
∙ 144 Pieces.
∙ 5mm Ballbearings.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.

Headset bearing conversion kit (Honda fork>Puch frame)

∙ Complete conversion set to mount a Honda MB/MT/MBX/MTX front fork in a Puch Maxi frame (Ideal for a Race and Cross Puch)

Headset bearing conversion bush set (Honda front fork>Puch frame)

∙ Headset bearing conversion bush set.
∙ Bush set to mount a Honda MB/MT/MBX/MTX front fork in a Puch Maxi frame.
∙ Ideal for a Raceor a Cross…

Headset nut (26mm Luxury Stainless steel)

∙ Luxury model.
∙ Diameter:26mm.
∙ Stainless steel.

Headset nut (26mm Luxury chrome)

∙ Luxury model.
∙ Diameter:26mm.
∙ Chrome.

Headset nut (26mm chrome)

∙ Headset nut.
∙ M26x1.
∙ ​Chrome.

Headset nut (26mm stainless steel)

∙ Headset nut.
∙ M26x1.
∙ Stainless steel.

Headset nut (26mm high chrome)

∙ Diameter:26 mm.
∙ High model (16mm)
∙ Chrome.

Headset nut (26mm Puch Maxi N chrome)

∙ For Puch Maxi N.
∙ Diameter:26mm.
∙ Chrome.

Ballhead ring (Vertical)

∙ Comes between the lower bearing shell and the front fork pin.

Crown plate O-Ring

∙ A Piece.
∙ This O-Ring comes between the upper crown plate and the ball head nut.

Ballhead bearing Buzetti (Puch Maxi S/N/X30)

∙ For Puch Maxi S/N/X30.
∙ Buzetti.
∙ Top-Qaulity.
∙ 26.5mm.

Steering head nut 26mm universal Puch MV/MS/VS/Maxi

∙ Steering head nut.
∙ Chrome.
∙ Diameter:26mm.
∙ Also for universal use.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Puch Maxi.

Headset cup Top side Puch MV / MS / VS / Etc

∙ Bearing / headset cup.
∙ Top side.
∙ Headset cup mounted in the frame for the assembly of the front fork.

Measurements:

∙ Outer diameter headset: 32.6mm.
∙ Inner diameter…

Headset cup Bottom side Puch MV / MS / VS / Etc

∙ Bearing / headset cup.
∙ Bottom side.
∙ Headset cup mounted in the frame for the assembly of the front fork.

Measurements:

∙ Outer diameter headset: 32.6mm.
∙ Inner…

Adjusting nut Headset M26x1 Puch MV / MS / VS / Etc

∙ Headset asjusting nut / headsetnut.
∙ With notches.
∙ Screw thread: M26x1.
∙ Placed over the headset bearing set top side.

Suitable for:

Puch Shift models.

∙ Puch…

Dust cover Headset Puch MV / MS / VS / Etc

∙ Headset dust cover.
∙ Placed over the headset bearing set top side.

Suitable for:

Puch Shift models.

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Tomos 2L.
∙ Tomos 3L.
∙ Tomos…

Shimring headset nut / crown plate 3.0mm

∙ Shimring.
∙ To use to fill up the space below the headset locking nut or the crown plate.
∙ VDM.

Measurements:

∙ Thickness: 3.0mm.
∙ Outer diameter: 38mm.
∙ Inner diameter: 26mm.

Shimring headset nut / crown plate 2.0mm

∙ Shimring.
∙ To use to fill up the space below the headset locking nut or the crown plate.
∙ VDM.

Measurements:

∙ Thickness: 2.0mm.
∙ Outer diameter: 38mm.
∙ Inner diameter: 26mm.

Shimring headset nut / crown plate 1.0mm

∙ Shimring.
∙ To use to fill up the space below the headset locking nut or the crown plate.
∙ VDM.

Measurements:

∙ Thickness: 1.0mm.
∙ Outer diameter: 38mm.
∙ Inner diameter: 26mm.

Shimring headset nut / crown plate 0.5mm

∙ Shimring.
∙ To use to fill up the space below the headset locking nut or the crown plate.
∙ VDM.

Measurements:

∙ Thickness: 0.5mm.
∙ Outer diameter: 38mm.
∙ Inner diameter: 26mm.

Headset cone mounting set

∙ Headset cone mounting set.
∙ To easily place place steering head cones.
∙ Set with various most used sizes.
∙ Mounting tool.