Performance reed block set 24mm MLM for Polini cylinder Puch Maxi

∙ Performance reed block set.
∙ With this upgrade performance reed block you have a beter reed valve for higher flows and a bigger carburetor.
∙ Plug&play…

Performance reed block set 21mm MLM for Polini cylinder Puch Maxi

∙ Performance reed block set.
∙ With this upgrade performance reed block you have a beter reed valve for higher flows and a bigger carburetor.
∙ Plug&play…

Performance reed block set 26mm for Polini cylinder Puch Maxi

∙ Performance reed block set.
∙ With this upgrade performance reed block you have a beter reed valve for higher flows and a bigger carburetor.
∙ Plug&play for…

Reed valve intake set 12-15mm Bing MLM Puch Maxi

∙ Reed valve intake set.
∙ To convert your piston port cylinder to a reed valve inlet cylinder!
∙ Manifold with a Bing carburetor comes very close to the frame on a Puch Maxi…

Performance reed block for Polini/Especiale cylinder Puch Maxi

∙ Performance reed block.
∙ With this upgrade performance reed block you can use a beter reed valve (V-Force for example) for higher flows and a bigger…

Reed valve for Performance reed block for Polini/Especiale cylinder Puch Maxi

∙ Reed valve.
∙ For Performance reed block.
∙ With this upgrade performance reed block you can use a beter reed valve (V-Force for example) for…

24mm Manifold for Performance reed block Puch Maxi

∙ Manifold.
∙ Round model.
∙ Mounting diameter carburetor: 24mm.
∙ Mounting holes: 52mm x 42mm.
∙ Steel.
∙ Black powdercoated.
∙ MLM.

21mm Manifold for Performance reed block Puch Maxi

∙ Manifold.
∙ Round model.
∙ Mounting diameter carburetor: 21mm (Dellorto PHBG with rubber mount)
∙ Mounting holes: 52mm x 42mm.
∙ Steel.
∙ Black powdercoated.
∙ MLM.

Reed valve block with manifold for crank case inlet Puch Maxi e50

∙ Reed valve block with manifold.
∙ Aluminium.
∙ To use for example with a KTM SX65 V Force 3 reed valve (With small modification)
∙ With this reed valve…

Reed valve block for crank case inlet Puch Maxi e50

∙ Reed valve block.
∙ Aluminium.
∙ To use for example with a KTM SX65 V Force 3 reed valve (With small modification)
∙ With this reed valve block you can easily make…

Reed valve V-Force 3 By Moto Tassinari

∙ Reed valve.
∙ V-Force 3 By Moto Tassinari!
∙ Distance mounting holes reed valve / manifold: 54x34mm.

∙ V-Force gives you both more power and better throttle response. This is due…

18mm Manifold 70cc Especiale Dellorto PHBG (23mm) MLM

∙ Manifold.
∙ This manifold fits on the 70cc Reed valve Especiale cylinder!
∙ This intake is side facing to the rear.
∙ Inner diameter:18mm.
∙ Connection…

Reed valve intake adapter MLM Puch

∙ Reed valve intake adapter.
∙ To convert your piston port cylinder to a reed valve inlet cylinder!
∙ Black.
∙ Top-Qaulity!
∙ MLM.

What else do you need:

∙ Manifold, Look related…

Manifold reed valve intake adapter Bing MLM Puch

∙ Manifold.
∙ For MLM reed valve intake adapter (Look related products below)
∙ Suitable for a Bing carburetor.
∙ Black.
∙ Top-Qaulity!
∙ MLM.

21mm Manifold Reed valve inlet adapter Dellorto PHBG MLM Puch

∙ Manifold.
∙ For MLM reed valve intake adapter (Look related products below)
∙ Suitable for a Dellorto PHBG carburetor met rubber connection.
∙ Inner…

19mm Manifold Reed valve inlet adapater Dellorto PHBG MLM Puch

∙ Manifold.
∙ For MLM reed valve intake adapter (Look related products below)
∙ Suitable for a Dellorto PHBG carburetor met rubber connection.
∙ Inner…

15mm Manifold Reedvalve inlet adapter Dellorto SHA MLM Puch

∙ Manifold.
∙ For MLM reed valve intake adapter (Look related products below)
∙ Suitable for a Dellorto SHA carburetor (19mm)
∙ Inner diameter: 14.75mm.
∙…

Reed valve kit Malossi 24mm

∙ Reed valve set Malossi
∙ For 65cc Polini cylinder.
∙ Also to use for reed valve inlet on the crank cases.
∙ Connection diameter:24mm.

Reed valve kit Polini (19mm)

∙ Reed valve kit for Polini cylinder.
∙ You can also use it for carter inlet.
∙ 4 valves.
∙ Complete with gaskets and bolts.
∙ Inner diameter:19mm.
∙ Outer diameter:24mm.
∙ Minor…

Reed valve kit Polini (15mm)

∙ Reed valve kit for Polini cylinder.
∙ You can also use it for carter inlet.
∙ 4 valves.
∙ Complete with gaskets and bolts.
∙ Inner diameter:15mm.
∙ Outer diameter:19mm.
∙ Minor…

18mm Manifold 65cc Polini Dellorto PHBG (23mm) MLM

∙ Manifold.
∙ Fits on 65cc Polini and 70cc Reed valve Especiale cylinder!
∙ This intake is side facing to the rear.
∙ Inner diameter: 18mm.
∙ Connection diameter:23mm…

15mm Manifold 65cc Polini Dellorto SHA (19mm) MLM

∙ Manifold.
∙ Fits on 65cc Polini and 70cc Reed valve Especiale cylinder!
∙ This intake is side facing.
∙ Inner diameter: 15mm.
∙ Connection diameter:19mm (Dellorto…

15mm Manifold 70cc Especiale Bing (20mm) MLM

∙ Manifold.
∙ Fits on the 70cc Reed valve Especiale cylinder!
∙ This intake is side facing to the rear.
∙ Inner diameter: 15mm.
∙ Connection diameter: 20mm (Bing…

18mm Manifold Reed valve Kit/Dellorto PHBG

∙ Manifold.
∙ For Polini/Malossi reed valve kit.
∙ Under side:46.5x39mm.
∙ Inlet:18mm.
∙ Connection diameter:23mm (Dellorto PHBG)
∙ Steel.
∙ Black powdercoated.
∙ MLM!

21mm Manifold Reed valve Kit

∙ Manifold.
∙ For Polini/Malossi reed valve kit.
∙ Under side:46.5x39mm.
∙ Inlet:21mm.
∙ Steel.
∙ Black powdercoated.
∙ MLM!

24mm Manifold Reed valve Kit

∙ Manifold.
∙ For Polini/Malossi reed valve kit.
∙ Under side:46.5x39mm.
∙ Inlet:24mm.
∙ Steel.
∙ Black powdercoated.
∙ MLM!

Manifold Italkit-Gilardoni 24mm chrome sideways MLM

∙ Manifold.
∙ Chrome.
∙ The Manifold fits on a Italkit/Gilardoni cylinder
∙ Carburetor connection for OKO/Mikuni carburetor.
∙ Inner diameter:24mm.
∙ Sideways.

15mm Manifold DUAL Bing connection! Gilardoni MLM

∙ Manifold.
∙ With dual Bing carburetor connection!
∙ Inlet:24mm.
∙ Connection diameter: 20mm (Bing carburateur)
∙ Steel.
∙ Black powdercoated.
∙ MLM!

24mm Manifold Gilardoni MLM

∙ Manifold.
∙ Inlet:24mm.
∙ Connection diameter: (Mikuni/OKO carburetor)
∙ Steel.
∙ Black powdercoated.
∙ MLM.

24mm Manifold Gilardoni with HPI CDI unit bracket MLM

∙ Manifold.
∙ With HPI ignition CDI unit bracket!
∙ Inlet:24mm.
∙ Connection diameter: (Mikuni/OKO carburetor)
∙ Steel.
∙ Black powdercoated.
∙ MLM.

21mm Manifold Gilardoni MLM

∙ Manifold.
∙ Inner diameter:21mm.
∙ Fits with a Dellorto PHBG carburetor With a rubber connection.
∙ Steel.
∙ Black powdercoated.
∙ MLM.

18mm Manifold Gilardoni/Dellorto PHBG MLM

∙ Manifold.
∙ Inlet:18mm.
∙ Connection diameter:24mm.
∙ Steel.
∙ Black powdercoated.
∙ MLM.

Suitable for:

∙ Dellorto PHBG carburetor.
∙ Dellorto PHBG replica…

18mm Manifold 70cc Especiale + Malossi set (23mm) MLM

∙ Manifold.
∙ This manifold fits on the 70cc Reed valve Especiale cylinder!
∙ This intake is side facing to the rear.
∙ Inner diameter: 18mm.
∙ Connection diameter:…

Italkit-Gilardoni/Dellorto Manifold 21mm (Sideways)

∙ The Manifold fits on a Italkit/Gilardoni cylinder with a PHBG carburetor (Also the replica carburetors)
∙ Connection carburetor:24mm.
∙ Inner diameter:21mm.
∙ Sideways.

Manifold adjustable Gilardoni / Dellorto PHBG

∙ Manifold.
∙ Connection diameter: 24mm.
∙ Adjustable.
∙ 45 Degrees and turnable in every direction.

Suitable for:

∙ Gilardoni / Italkit cylinder.
∙ Dellorto PHBG…

Manifold Italkit/Gilardoni complete (24mm)

∙ Manifold for Italkit/Gilardoni cylinders.
∙ For Keihin, OKO, PWK and replica carburetors.
∙ Complete with rubber, clamps, gaskets and mounting bolts.

Measurements:

∙ Inlet…

Manifold 20mm rubber Gilardoni / Dellorto PHBG

∙ Manifold.
∙ Rubber model.
∙ Inlet: 20mm.
∙ Suitable for a Gilardoni / Italkit cylinder with a Dellorto PHBG carburetor.

Manifold Italkit/Gilardoni 18mm (Dellorto carburetor)

∙ Manifold for Italkit/Gilardoni cylinders.
∙ For original and replica Dellorto PHBG carburetors (Slide-on) and other slide-in carburetors.
∙ Complete with rubber and…

Manifold Italkit/Gilardoni 18mm (Bing carburetor)

∙ Manifold for Italkit/Gilardoni cylinders.
∙ For original and replica Bing carburetors.

Measurements:

∙ Inlet diameter:18mm.
∙ Connection diameter carburetor:23mm.
∙…

Manifold Italkit/Gilardoni 20mm (Dellorto carburetor)

∙ Manifold for Italkit/Gilardoni cylinders.
∙ For Original Dellorto PHBG and Dellorto replica carburetors.

Measurements:

∙ Inlet diameter:20mm.
∙ Connection diameter…

Italkit-Gilardoni/Dellorto Manifold Black Racing

∙ The Manifold fits on a Italkit/Gilardoni cylinder with a Dellorto plug carburetor (Black Racing)
∙ Carburetor will be angled on the cylinder with this manifold.

Manifold Athena AJH 24mm black sideways MLM

∙ Manifold.
∙ The manifold fits on a Athena AJH cylinder.
∙ Inner diameter:24mm.
∙ Outer diameter:29mm.
∙ Sideways.
∙ Steel.
∙ Black powdercoated.
∙ MLM!

Manifold Athena AJH 18mm black sideways MLM

∙ Manifold.
∙ This manifold fits on a Athena AJH cylinder.
∙ Inner diameter:18mm.
∙ Outer diameter:23mm.
∙ Sideways.
∙ Steel.
∙ Black powdercoated.
∙ MLM!

Athena AJH/Dellorto Manifold 21mm (Sideways)

∙ The Manifold fits on AJH Cylinders with PHBG carburetors (Also the replica carburetors)
∙ Connection carburetor:24mm.
∙ Inner diameter:21mm.
∙ Sideways.

Athena/Dellorto Manifold 21mm (Sideways)

∙ The Manifold fits on 50cc/70cc Cylinders with PHBG carburetors (Also the replica carburetors)
∙ Connection carburetor:24mm.
∙ Inner diameter:21mm.
∙ Sideways.

Athena little reed cylinder/Dellorto Manifold

∙ Fits on 50cc/70cc Athena little reed cylinder awith a Dellorto PHGB carburetor (also replica carburetor)
∙ Connection of the manifold:24mm.

19mm reed valve manifold 65cc Polini sideways

∙ Manifold.
∙ Manifold angles sideways to the right side.
∙ For 65cc Polini reed valve cylinder.
∙ Inlet: 19mm.
∙ Connection diameter: 25mm (19mm Bing carburetor or a…

Manifold Polini 15mm Puch Maxi

∙ Manifold.
∙ To use for Polini cylinder.
∙ To use with a 12-15mm Bing carburetor.
∙ Manifold is lower and longer as original.

Suitable for:

∙ Puch Maxi.

Manifold 20mm 80cc Metrakit

∙ Manifold.
∙ Inlet: 20mm.
∙ Distance mounting holes: 34.5mm.
∙ Suitable for 80cc Metrakit cylinder.

20mm Manifold round model sqaure port Mikuni MLM

∙ Manifold.
∙ Round model with sqaure port.
∙ This intake is rear facing.
∙ Inlet: 20mm.
∙ Mounting holes: 25mm center to center (Mikuni carburetors)
∙ Steel.
∙ Black…

18mm Manifold round Dellorto PHBG (23mm) MLM

∙ Manifold.
∙ This intake is side facing to the front.
∙ Inner diameter: 18mm.
∙ Connection diameter: 23mm (Dellorto PHBG)
∙ Steel.
∙ Black powdercoated.
∙ MLM!

18mm Manifold Hero cylinder 23mm MLM

∙ Manifold.
∙ For 65cc Hero cylinder.
∙ Inner diameter:18mm.
∙ Connection diameter:23mm.
∙ Steel.
∙ Black powdercoated.
∙ MLM!

15mm Manifold round Bing (20mm) MLM

∙ Manifold.
∙ This intake is side facing to the front.
∙ Inner diameter: 15mm.
∙ Connection diameter: 20mm (Bing carburetor)
∙ Steel.
∙ Black powdercoated.
∙ MLM!

18mm Manifold sqaure Bing (20mm) MLM

∙ Manifold.
∙ Sqaure model.
∙ This intake is side facing to the rear.
∙ Suitable for piston port cylinders like Stock, Athena, Airsal cylinder Etc.
∙ Inner diameter: 18mm.
∙…

15mm Manifold sqaure port Dellorto SHA MLM

∙ Manifold.
∙ Sqaure model.
∙ This intake is rear facing.
∙ Inlet: 15mm.
∙ Connection diameter:19mm (Dellorto SHA carburetors)
∙ Steel.
∙ Black powdercoated.
∙…

15mm manifold MLM Dellorto SHA

∙ Manifold.
∙ Inlet:15mm.
∙ Connection diameter:19mm (Dellorto SHA carburetors)
∙ Steel.
∙ Black powdercoated.
∙ MLM.

Suitable for:

∙ Dellorto SHA carburetors.

VDM Dellorto SHA Manifold sideways 15mm (Slide-on)

∙ The Manifold fits on piston port cylinders with a slide-on Dellorto SHA carburetor (Also the replica carburetors)
∙ Connection carburetor:19mm.
∙ Inner diameter:15mm.
∙…

VDM Bing carburetor Manifold sideways 15mm (Slide-on)

∙ The Manifold fits on piston port cylinders with a slide-on 10-15mm Bing carburetor (Also the replica carburetors)
∙ Connection carburetor:20mm.
∙ Inner…

21mm Manifold sideways spigot mount Dellorto PHBG / Polini CP

∙ Manifold.
∙ Inner diameter: 21mm.
∙ Connection manifold: 26mm.
∙ Sideways.
∙ Fits with a Dellorto PHBG and Polini CP carburetor with a rubber connection.
∙ Steel.

VDM Dellorto PHBG Manifold sideways 21mm (Slide-on)

∙ The Manifold fits on piston port cylinders with a slide-on 16-21mm PHBG carburetor (Also the replica carburetors)
∙ Connection carburetor:24mm.
∙ Inner…

Dellorto PHBG Manifold sideways 19mm (Slide-on)

∙ The Manifold fits on Piston port cylinders with a slide-on 16-21mm PHBG carburetor (Also the replica carburetors)
∙ Connection carburetor:24mm.
∙ Inner diameter:19mm.
∙…

Manifold sideways 19mm (Plug-in)

∙ The Manifold fits on piston port cylinders with a Plug-in carburetor (a.o Black Racing carburetors)
∙ Connection carburetor:25mm.
∙ Inner diameter:19mm.
∙ Sideways.

VDM Manifold sideways 21mm (Plug-in)

∙ The Manifold fits on piston port cylinders with a Plug-in carburetor (a.o Black Racing carburetors)
∙ Connection carburetor:25mm.
∙ Inner diameter:21mm.
∙ Sideways.

Manifold Athena AJH/ Dellorto

∙ Fits on a Athena AJH cylinder and PHGB carburetors. (Also replica carburetors)
∙ Connection of the manifold is 26mm (The plastic bush of the carburetor need to be removed)

Manifold Athena AJH/Bing (15mm)

∙ Fits on a Athena AJH cylinders with a Bing carburator (Also replica carburetors)
∙ Connection of the manifold is 20mm.

Reed valve manifold 21mm Stainless steel Piaggio (2 Pieces)

∙ 2 pieces to weld the suction funnnel yourself in the angle you want.
∙ Inner diameter:21mm.
∙ Suitable for Dellorto PHBG and Polini cp carburetors.
∙ Laser…

Reed valve manifold Piaggio 24mm (Reed valve inlet)

∙ To use for Puch engines with reed valve inlet.
∙ Inner diameter:24mm.
∙ Suitable for Dellorto PHBG and Polini CP plug-in carburetor.

Manifold turnable 15-21mm universal Polini

∙ Manifold.
∙ Turnable.
∙ Fits on 15mm-21mm carburetors.
∙ For universal use.
∙ Original Polini article number:215.0427.

Measurements:

∙ Length:60mm.
∙ Width:35mm.
∙ Inlet:21mm.

15mm Manifold Dellorto SHA

∙ Manifold.
∙ Inlet:15mm.
∙ Connection for Dellorto SHA carburetor.
∙ Carburetor comes a bit forward with this manifold.
∙ Sqaure port model.
∙ Aluminium.

Dellorto SHA Manifold Athena 15mm

∙ The Manifold fits on piston port cylinders with a slide-on Dellorto SHA carburetor (Also the replica carburetors)
∙ Connection carburetor:19mm.
∙ Inner diameter:15mm.
∙ Athena.

Manifold (Dellorto 17-20mm)

∙ Connection diameter:24mm.

Manifold (Bing 19mm)

∙ Connection diameter:25mm.

15mm Manifold MLM (Puch E50 engine)

∙ Manifold.
∙ Inner diameter: 15mm.
∙ Connection diameter: 20mm (Bing carburetor)
∙ Connection diameter without rubber: 17mm.
∙ MLM.

Suitable for:

∙ Puch E50 engine.

15mm Manifold round bend MLM (Puch E50 engine)

∙ Manifold.
∙ Model with round bend.
∙ Inner diameter: 15mm.
∙ Connection diameter: 20mm (Bing carburetor)
∙ Connection diameter without rubber: 17mm.
∙ MLM.

Suitable…

15 mm manifold (Bing)

∙ Connection diameter:20mm.
∙ Sqaure inlet.

15 mm manifold chrome (Bing)

∙ Connection diameter:20mm.
∙ Sqaure inlet.
∙ Chrome.

12mm manifold Bing carburetor Swiing

∙ Manifold Bing.
∙ Inner diameter:12mm.
∙ Connection diameter:20mm.
∙ Round inlet.
∙ Top-Qaulity!

12 mm manifold (Bing)

∙ Connection diameter:20mm.
∙ Round inlet.

15mm Manifold MLM (ZA50 engine)

∙ For Puch ZA50 engine.
∙ Inlet:15mm.
∙ Connection diameter:20mm (Bing carburetors)
∙ Connection diameter without rubber:17mm.
∙ Total height:62mm.
∙ MLM.

15mm Manifold (ZA50 engine)

∙ For Puch ZA50 engine.
∙ Inlet:15mm.
∙ Connection diameter:20mm (Bing carburetors)
∙ Total height:62mm.