Bearing Bush Brass Clutch bell Puch e50

∙ Bearing bush.
∙ Brass.
∙ Replacement part for the clutch bells and gears with bearing bush from the shop.​
∙ Picture 2 is a example picture of the bearing bush in a clutch…

VDMRacing Needlebearing Clutch bell Puch e50

∙ Needle bearing.
∙ Replacement part for the VDMRacing clutch bell and gears with needlebearing from our shop.
∙ Picture 2 is a example picture of the needlebearing in a…

Bearing 6203 C3 NTN 17mm x 40mm x 12mm Puch Maxi

∙ Bearing.
∙ 6203 C3 NTN.

Measurements:

∙ Inner diameter: 17mm.
∙ Outer diameter: 40mm.
∙ Width: 12mm.

Suitable for:​

∙ Puch Maxi e50 (Crankshaft Left)
∙ Puch…

Seal Crankshaft NM & OM / Main Gear 17/40/7 NTN Puch Maxi e50

∙ Seal crankshaft NM & OM / drive shaft.
∙ 17 / 40 / 7.
∙ NTN.

Measurements:

∙ Outer diameter: 40mm.
∙ Inner diameter: 17mm.
∙ Thickness: 7mm.

Suitable…

Seal crankshaft NM and OM / main gear 17/40/7 A-Qaulity! Viton Puch Maxi E50

∙ Seal crankshaft NM and OM / drive shaft.
∙ 17 / 40 / 7.
∙ Required for Race engines!
∙ Extremely heat resistant!
∙ A-Qaulity!
∙…

Seal Crankshaft NM & OM / Main Gear 17/40/7 KACO A-Qaulity! Puch Maxi e50

∙ Seal crankshaft NM & OM / drive shaft.
∙ 17 / 40 / 7.
∙ Required for Race engines!
∙ A-Qaulity!
∙ KACO.

Measurements:

∙ Outer diameter:…

Bearing 6203 C3 SKF 17mm x 40mm x 12mm Puch / Yamaha / Zündapp / Tomos / Honda / Universal

∙ Bearing.
∙ 6203 C3 SKF.

Measurements:

∙ Inner diameter: 17mm.
∙ Outer diameter: 40mm.
∙ Width: 12mm.

Suitable for:​

∙…

Snapring Bearing Crankshaft / Main Gear Puch Maxi e50

∙ Snap ring.
∙ Suitable for the 6203 NR crankshaft bearing.
∙ Also placed between bearing and seal on the main gear / drive shaft.
∙ A Piece.

Suitable for:

∙ Puch…

Bearing / Seal set Main Gear 3 Bearing Puch Maxi e50

Complete Main gear bearing / seal set for Puch e50 3 bearing engines.

∙ 1x Bearing 6203C3 NTN.
∙ 1x Seal 17/40/7.
∙ 1x Snapring.

Suitable for:

∙ Puch Maxi e50 Engines.

Bearing / Seal set Main Gear 4 Bearing Puch Maxi e50

Complete Main gear bearing / seal set for Puch e50 4 bearing engines.

∙ 2x Bearing 6203C3 NTN.
∙ 1x Seal 17/40/7.
∙ 1x Snapring.

Suitable for:

∙ Puch Maxi e50 Engines.