VEC TV-2E electronic ignition coil Puch / Etc

∙ VEC TV-2E electronic ignition coil.
∙ Suitable for 6v en 12v.
∙ Start rpm 400, max rpm 10000.
∙ Suitable for left- and right turning engines
∙ Replaces ignition coil,…

Ignition Electronic Polini 12 Volt Right turning Puch Maxi E50

∙ Electronic Ignition.
∙ For Right turning engines.
∙ 12 volt.
∙ Specially developed for Puch E50 engine with a 65cc Polini kit, but also suitable for other…

Ignition Kokusan EVO2 Plus 12 Volt Puch Maxi / ZA50 / Z50 / Monza / Etc

∙ Electronic Ignition.
∙ Clockwise & Counterclockwise to use.
∙ 12 Volt.
∙ Kokusan Evolution V 2 Plus.

Complete set met:

∙ Stator / Base…

Ignition Kokusan EVO2 Plus 6 Volt Puch Maxi / ZA50 / Z50 / Monza / Etc

∙ Electronic Ignition.
∙ Clockwise & Counterclockwise to use.
∙ 6 Volt.
∙ Kokusan Evolution V 2 Plus.

Complete set with:

∙ Stator / Base…

Ignition Electronic Kokusan EVO 2 + Cooling fan 12 Volt - 85 Watt Tomos / Puch 2 / 3 Gear

∙ Electronic Ignition.
∙ Clockwise & Counterclockwise to use.
∙ 12 Volt Voltage regulator.
∙ 85 Watt Light coil.
∙ Complete with…

Ignition Electronic Kokusan EVO 2 + Cooling fan 6 Volt - 85 Watt Tomos / Puch 2 / 3 Gear

∙ Electronic Ignition.
∙ Clockwise & Counterclockwise to use.
∙ 6 Volt Voltage regulator.
∙ 85 Watt Light coil.
∙ Complete with…

Inner rotor Ignition PVL Race Puch

∙ Inner rotor ignition.
∙ PVL is known for its quality and builds thousands of different ignitions in Germany.
∙ Ignition is suitable for left- and right turning engines, it also can be…

Inner rotor Ignition + Light coil Selettra Race Puch

∙ Inner rotor ignition.
∙ Faster acceleration and better throttle response with the lighter rotor.
∙ Model with 12 Volt light coil!
∙ Complete with CDI Unit, Bobine,…

Inner rotor Ignition Selettra Race Puch Maxi / Etc

∙ Inner rotor ignition.
∙ Faster acceleration and better throttle response with the lighter rotor.
∙ Complete with CDI and Bobine
∙ For Racing purposes.
∙ Selettra,…

Inner rotor Ignition Selettra KZ Race Puch

∙ Inner rotor ignition.
∙ Ignition is suitable for left- and right turning engines so it also can be used on Z50 and ZA50 engines.
∙ The distance between the stator and the rotor…

Ignition Electronic Model Bosch Left turning Puch

∙ Ignition.
∙ Electronic model.
∙ Model as Bosch ( Remake )
∙ Leftturning model.
∙ Including flywheel.
∙ Including Coil / CDI Unit 12 Volt.

Tip! use the voltage…

Ignition 6 Volt - 15 Watt - 5 Watt Model Bosch (with Brakelight) Left turning Complete Puch

∙ Ignition.
∙ Contact breaker model.
∙ Model as Bosch (Remake)
∙ Inclusief extra spoel van 5 Watt.
∙ 6 Volt 15 Watt / 5…

Ignition Electronic Model Bosch Right turning Puch

∙ Ignition.
∙ Electronic model.
∙ Model as Bosch ( Remake )
∙ Rightturning model.
∙ Including flywheel.
∙ Including Coil / CDI Unit 12 Volt.

Measurements:

∙ Outer…

Ignition Electronic Model Bosch Right turning Puch

∙ Ignition.
∙ Electronic model.
∙ Model as Bosch ( Remake )
∙ Rightturning model.
∙ Including flywheel.
∙ Including Coil / CDI Unit 12 Volt.

Measurements:

∙ Outer…

Ignition 6 Volt - 15 Watt - 5 Watt Model Bosch (with Brakelight) Puch

∙ Ignition.
∙ Contact breaker model.
∙ Model as Bosch (Remake)
∙ Including extra Coil of 5 Watt.
∙ 6 Volt 15 Watt / 5 Watt.
∙ Without flywheel.
∙…

Ignition 6 Volt - 17 Watt Model Bosch Puch

∙ Ignition.
∙ Contact breaker model.
∙ Model as Bosch (Remake)
∙ 6 Volt 17 Watt.
∙ Without flywheel.
∙ To use for Left turning & Right turning engine.
∙ For Bosch / Iskra…

Flywheel Left turning Contact points Ignition Model Bosch Puch

∙ Flywheel.
∙ Model Bosch.
∙ Left turning.
∙ Contactpoints ignition.

Measurements:

∙ Innendiameter Crankshaft part: 15mm - 12mm.
∙ Outerdiameter…

Flywheel Right turning Contact points Ignition Model Bosch Puch Maxi

∙ Flywheel.
∙ Model Bosch.
∙ Right turning.
∙ Contactpoints ignition.

Measurements:

∙ Innendiameter Crankshaft part: 15mm - 12mm.
∙ Outerdiameter…

Flywheel Left turning Ignition Model Bosch 4 Gear Puch Monza / Grand Prix / ZV50 / M50 Racing / Etc

∙ Flywheel.
∙ Model Bosch.
∙ Left turning.

Measurements:

∙ Inner diameter cone: 15mm.
∙ Inner diameter: 91mm.
∙…

Base plate 90mm Model Bosch Puch

∙ Baseplate.
∙ Model Bosch ignition.
∙ Diameter: 90mm.

Suitable for:

∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Stator MVT inner rotor Ignition Puch

∙ Stator MVT inner rotor ignition.

Suitable for:

∙ Universal to use on various moped models.
∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Groundplate MVT inner rotor Ignition Puch

∙ Groundplate MVT inner rotor ignition.

Suitable for:

∙ Puch Models.

Rotor MVT inner rotor Ignition Puch

∙ Rotor / Flywheel MVT inner rotor ignition.
∙ PREM12 / PREM27.

Suitable for:

∙ Universal to use on various moped models.
∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Coil MVT inner rotor Ignition Puch

∙ Coil MVT inner rotor ignition.
∙ MVT PX20.
∙ PREM01, PREM09, PREM11, PREM12, PREM19, PREM21, PREM27.

Suitable for:

∙ Universal to use on various moped models.
∙ Puch Models.
∙…

CDI Unit MVT inner rotor Ignition Puch

∙ CDI Unit MVT inner rotor ignition.
∙ MVT RJ05X.
∙ PREM12 / PREM27.

Suitable for:

∙ Universal to use on various moped models.
∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Eprom Analog 5 MVT inner rotor Ignition Universal

∙ Eprom for Premium MVT and direct digital ignition
∙ Set the ignition at 2.9 mm before top dead center, remove the analog diagram and replace it with the Eprom.
∙ The eprom…

Eprom Analog 4 MVT inner rotor Ignition Universal

∙ Eprom for Premium MVT and direct digital ignition
∙ Set the ignition at 2.9 mm before top dead center, remove the analog diagram and replace it with the Eprom.
∙ The eprom…

Eprom Analog 3 MVT inner rotor Ignition Universal

∙ Eprom for Premium MVT and direct digital ignition
∙ Set the ignition at 2.9 mm before top dead center, remove the analog diagram and replace it with the Eprom.
∙ The eprom…

Eprom Analog 2 MVT inner rotor Ignition Universal

∙ Eprom for Premium MVT and direct digital ignition
∙ Set the ignition at 2.9 mm before top dead center, remove the analog diagram and replace it with the Eprom.
∙ The eprom…

Eprom Analog 1 MVT inner rotor Ignition Universal

∙ Eprom for Premium MVT and direct digital ignition
∙ Set the ignition at 2.9 mm before top dead center, remove the analog diagram and replace it with the Eprom.
∙ The eprom…

Stator 90mm HPI inner rotor Ignition Puch

∙ Stator / Groundplate.
∙ Suitable on all HPI innerrotor ignitions, comes standard with the HPI ignition.

Measurements:

∙ Outer diameter: 100mm.
∙ Inner diameter: 65mm.
∙…

Rotor HPI inner rotor Ignition Puch

∙ Rotor / Flywheel.
∙ Suitable on all HPI innerrotor ignitions, comes standard with the HPI ignition.

Measurements:

∙ Outer diameter: 62mm.
∙ Inner diameter cone: 13mm - 16mm.
∙…

CDI Unit Standard HPI inner rotor Ignition

∙ CDI Unit.
∙ Suitable on all HPI innerrotor ignitions, comes standard with the HPI ignition.

Suitable for:

∙ Universal to use on various moped models.

CDI Unit Double Curve HPI inner rotor Ignition

∙ CDI Unit.
∙ Suitable on all HPI inner rotor ignitions.
∙ Model with double curve!
∙ Curve can be changed with steering switch.

Suitable for:

∙ Universal to use on…

Handlebar Switch Double Curve HPI CDI Unit Ignition

∙ Handlebar switch.
∙ Suitable on all HPI inner rotor / 2-TEN ignitions.
∙ Handlebar switch to change the Curve.

Suitable for:

∙ Universal to use on various moped models.

Coil HPI inner rotor Ignition

∙ Coil.
∙ Suitable on all HPI innerrotor ignitions, comes standard with the HPI ignition.

Suitable for:

∙ Universal to use on various moped models.

Bracket coil HPI inner rotor Ignition

∙ Coil bracket.
∙ Suitable on all HPI innerrotor ignitions, Comes standard with the HPI ignition.

Suitable for:

∙ Universal to use on various moped models.

Rotor HPI 2-TEN Ignition Puch

∙ Rotor / Flywheel.
∙ Suitable on all HPI 2-TEN ignitions, comes standard with the HPI ignition.

For this flywheel a flywheel puller M27 x 1mm is needed.

Measurements:

∙ Outer diameter:…

CDI Unit Standard HPI 2-TEN Ignition

∙ CDI Unit.
∙ Suitable on all HPI 2-TEN ignitions, comes standard with the HPI ignition.

Suitable for:

∙ Universal to use on various moped models.

CDI Unit Double Curve HPI 2-TEN Ignition

∙ CDI Unit.
∙ Suitable on all HPI 2-TEN ignitions.
∙ Model with double curve!
∙ Curve can be changed with steering switch.

Suitable for:

∙ Universal to use on various moped models.

Voltage regulator HPI 2-TEN Ignition

∙ Voltage regulator.
∙ Suitable on all HPI 2-TEN ignitions.
∙ Comes with a mounting manual.

Suitable for:

∙ Universal to use on various moped models.

Stator PVL inner rotor Ignition Puch

∙ Stator / Groundplate PVL inner rotor ignition.
∙ Clockwise & Counterclockwise to use.
∙ Stator 1443-90.
∙ 4000 windings.
∙ 90mm groundplate.
∙ PVL, Made in Germany.

Suitable…

Rotor PVL inner rotor Ignition Puch

∙ Rotor PVL inner rotor ignition.
∙ Clockwise & Counterclockwise to use.
∙ Rotor 923 Cone 1:5.
∙ 350 Grams.
∙ PVL, Made in Germany.

Suitable for:

∙ Universal to use on various…

Coil PVL inner rotor Ignition Puch

∙ Coil PVL inner rotor ignition.
∙ Clockwise & Counterclockwise to use.
∙ 105 458 (458 115)
∙ 036-IG-27.
∙ Plug in typ 2.
∙ PVL, Made in Germany.

Suitable for:

∙ Universal to use…

Powerbox P10 Kokusan Electronic Ignition / MHKZ Ignition Universal

∙ Powerbox P10.
∙ Suitable for a Electronic Kokusan igniton & MHKZ Bosch ignition.
∙ For standard Mopeds ( Max 9000 RPM )

Suitable for:

∙ Universal to…

Pickup Kokusan EVO 2 Electronic Ignition Universal

∙ Pick up.
∙ Suitable for a Electronic Kokusan EVO 2 ignition.

Measurements:

∙ Length: 17mm.
∙ Width: 19mm.
∙ Height: 10mm.
∙ Distance between mounting points:…

Coil Kokusan Electronic Ignition Universal

∙ Coil.
∙ Suitable for a Electronic Kokusan igniton.

Suitable for:

∙ Universal to use on various moped models.
∙ Puch Models.
∙ Kreidler Models.
∙ Zündapp Models.

Reinforcement plate set Variable Stainless steel MVT Inner rotor Ignition

∙ Reinforcementplate set.
∙ Stainless steel.
∙ With variable weights!
∙ For more mass at the crankshaft.
∙ To be used on MVT innerrotor…

Reinforcement plate 350 Gram Stainless steel HPI inner rotor Ignition

∙ Reinforcement plate.
∙ 350 Gram.
∙ Easy to mount on the Rotor.
∙ For more mass on the Rotor.
∙ Stainless steel.
∙ Suitable on all HPI inner rotor…

Reinforcement plate 280 Gram Stainless steel HPI 2-TEN Ignition

∙ Reinforcement plate.
∙ 280 Gram.
∙ Easy to mount on the Rotor.
∙ For more mass on the Rotor.
∙ Stainless steel.
∙ Suitable on all HPI 2-TEN…

Mounting Bolt + Spring washer Contacts Model Bosch Puch

∙ Mounting Bolt+ Spring washer contacts.
∙ For mounting the Contacts on a Bosch model Base plate.

Suitable for:

∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Ontsteking spoel Sport 2.0 Model Bosch A-Kwaliteit! Puch

∙ Ontstekingspoel / Vonkspoel.
∙ Model 2.0.
∙ Model als Bosch (Vervangingsspoel voor origineel)
∙ Hoogspannings sport bobine voor alle Bosch model ontstekingen.
∙…

Ignition Coil Sport 1.0 Model Bosch A-Quality! Puch

∙ Ignition Coil.
∙ Model 1.0.
∙ Model as Bosch (Replacement coil as Original)
∙ High voltage sport ignition coil for all Bosch ignitions.
∙ Very strong spark, even at…

Ignition Coil Stefa - Bosch Old Model Puch

∙ Ignition coil.
∙ Suitable for old model Stefa / Bosch ignition.

Measurements:

∙ Total length: 74mm.
∙ Mounting distance holes CtC: 52mm.

Suitable for:

∙ Puch Models from the 50´s

Ignition Coil Model Bosch Puch

∙ Ignition Coil.
∙ Centre to Centre Mounting: 54mm.

Suitable for:

∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Ignition Coil Wide Coil Model Bosch Puch

∙ Ignition Coil.
∙ Model with a wider Coil core for the optimal pick-up of the magnetic field.
∙ Centre to Centre Mounting: 54mm.

Suitable for:

∙ Puch Models.
∙ Zündapp…

Ignition Coil PVL Replica Model Bosch A-Qaulity! Puch Maxi - Turbo Sport

∙ Ignition coil.
∙ PVL replica coil.
∙ Model as Bosch (Replacement coil as original)
∙ Mounting bolt distance: 54mm.
∙ A-Qaulity!

Suitable…

Ignition Coil PVL Replica Model Bosch A-Qaulity! Puch MV / VS / DS / Etc

∙ Ignition coil.
∙ PVL replica coil.
∙ Model as Bosch (Replacement coil as original)
∙ Mounting bolt distance: 54mm.
∙ A-Qaulity!

Suitable…

Coil Ignition 6 Volt Blue Original! Puch Maxi P1

∙ Coil ignition.
∙ Original model, Top-Qaulity!
∙ Blue.
∙ 6 Volt.

Measurements:

∙ Distance between mounting points: 32mm.

Suitable for:

∙ Puch Maxi P1 Models.
∙…

Coil Ignition 6 Volt Blue Replica Puch Maxi P1

∙ Coil ignition.
∙ Replica model.
∙ Blue.
∙ 6 Volt.

Measurements:

∙ Distance between mounting points: 32mm.

Suitable for:

∙ Puch Maxi P1 Models.
∙ Gilera Citta.
∙…

Coil Ignition 6 Volt Black Replica Puch Maxi

∙ Coil ignition.
∙ Replica model.
∙ Black.
∙ 6 Volt.

Measurements:

∙ Distance between mounting holes: 52mm.

Suitable for:

∙ Puch Maxi.
∙ Gilera Citta.
∙ Vespa Ciao.
∙ Vespa SI.

Coil Ignition External Model as Bosch Black Puch

∙ External coil ignition.
∙ Model as Bosch.
∙ Type 0 212 940 001.

Measurements:

∙ Distance between mounting holes: 53mm - 30mm.
∙ Diameter mounting holes:…

Coil Top Performances Kokusan Electronic Ignition Universal∙ Coil.
∙ Suitable for a Electronic Kokusan igniton.
∙ Top Performances.
∙ Unlimited.
∙ Model with fixed curve.
∙ Length spark plug cable: 50cm.

Suitable…

Coil Bracket Stainless steel Universal

∙ Coil bracket.
∙ For mounting the ignition coil.
∙ Stainless steel.

Suitable for:

∙ Universal to use on various moped models.

CDI Electronic Ignition Model Bosch Puch

∙ CDI / Coil.
∙ For electronic ignition ( model Bosch )

Suitable for:

∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Condenser Screw Original! A-Quality! Bosch Puch

∙ Condenser ignition.
∙ Screw / nut connection.
∙ A-Quality!
∙ Original Bosch.

Measurements:

∙ Diameter: 18mm.
∙ Height: 25mm.

Suitable for:

∙ Puch Models.
∙…

Condenser Solder Original! A-Quality! Bosch Puch

∙ Condenser ignition.
∙ Solder connection.
∙ A-Quality!
∙ Original Bosch.

Measurements:

∙ Diameter: 18mm.
∙ Height: 25mm.

Suitable for:

∙ Puch Models.
∙…

Condenser Heightened Solder Original! A-Quality! Bosch Puch

∙ Condenser ignition.
∙ Solder connection.
∙ High model.
∙ A-Quality!
∙ Original Bosch.

Measurements:

∙ Diameter: 18mm.
∙ Height: 32mm.

Suitable…

Condenser Thread A-Quality! EFFE Puch

∙ Condenser ignition.
∙ Thread connection.
∙ A-Quality!
∙ EFFE.

Measurements:

∙ Diameter: 18mm.
∙ Heigth: -

Suitable for:

∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Condenser Screw A-Quality! EFFE Puch

∙ Condenser ignition.
∙ Screw / nut connection.
∙ A-Quality!
∙ EFFE.

Measurements:

∙ Diameter: 18mm.
∙ Heigth: -

Suitable for:

∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Condenser Screw Model Bosch Puch

∙ Condenser ignition.
∙ Screw / nut connection.
∙ Model as Bosch.

Measurements:

∙ Diameter: 18mm.
∙ Height: 25mm.

Suitable for:

∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Condenser Screw Model Bosch Puch

∙ Condenser ignition.
∙ Screw / nut connection.
∙ Model as Bosch.

Measurements:

∙ Diameter: 18mm.
∙ Height: 22mm.

Suitable for:

∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Condenser Solder A-Quality! EFFE Puch

∙ Condenser ignition.
∙ Solder connection.
∙ A-Quality!
∙ EFFE.

Measurements:

∙ Diameter: 18mm.
∙ Height: -

Suitable for:

∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Condenser Heightened Solder A-Quality! EFFE Puch

∙ Condenser ignition.
∙ Solder connection.
∙ High model.
∙ A-Quality!
∙ EFFE.

Measurements:

∙ Diameter: 18mm.
∙ Height: 31mm.

Suitable for:

∙ Puch Models.
∙…

Condenser Solder Model Bosch Puch

∙ Condenser ignition.
∙ Solder connection.
∙ Model as Bosch.

Measurements:

∙ Diameter: 18mm.
∙ Height: 22mm.

Suitable for:

∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.