VDMRacing Kickstart conversion kit with sprocket chrome Top-Qaulity! Puch e50

∙ Kickstart conversion kit.
∙ With this set you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙ Chrome…

VDMRacing Kickstart conversion kit chrome Top-Qaulity! Puch e50

∙ Kickstart conversion kit.
∙ With this set you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙ Chrome conversion…

VDMRacing Conversion plate kickstart conversion kit chrome Top-Qaulity! Puch e50

∙ Conversion plate.
∙ With this conversion plate you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙…

VDMRacing Clutch bell plate kickstart conversion kit Top-Qaulity! Puch e50

∙ Clutch bell plate.
∙ With this clutchbell plate you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙…

Pressure plate clutch kickstart Puch e50

∙ Pressure plate.
∙ This part is mounted on the clutch of a Puch e50 kickstart engine.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Sprocket clutch kickstart Puch e50

∙ Sprocket.
∙ This part is mounted on the clutch of a Puch e50 kickstart engine.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

VDMRacing Crankshaft nut kickstart conversion kit Top-Qaulity! Puch e50

∙ Crankshaft nut.
∙ With this crankshaft nut you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙…

bolt set (kickstart conversion kit)

∙ 5x M6 bolts.

ATF Clutch-oil Eurol 1 Liter Puch Maxi / X30 / Universal

∙ ATF Koppelings-oil.
∙ Oil for automatic clutch.
∙ ATF llD.
∙ 1 Liter.
∙ Eurol.

Suitable for:

∙ Puch Maxi e50 engines.
∙ Universal to use for various moped models.

ATF engine oil Valvoline Heavy Duty Pro 1 Liter Universal

∙ ATF engine oil for Puch e50 engines.
∙ 1 Liter.
∙ Heavy duty Pro!
∙ Valvoline.

ATF engine oil Putoline 1 Liter Universal

∙ ATF engine oil for Puch e50 engines.
∙ 1 Liter.
∙ Putoline.

Clutch oil Castrol Transmax -Z Race engines 1 Liter

∙ Clutch oil.
∙ Castrol Transmax-Z.
∙ Suitable for Race/Cross engines.
∙ Best choice for high RPM engines.
∙ High-Qaility!
∙ 1 Liter.

2 Stroke oil Castrol Power XR77 For Race engines (1 Liter)

∙ 2-Stroke oil.
∙ Castrol Power XR77.
∙ Suitable for Race engines.
∙ Fully synthetic oil that a strong protective lubrication film offers against mechanical and…

2 Stroke oil Castrol Power RS TTS 1 Liter Universal

∙ 2-Stroke oil.
∙ Castrol Power RS TTS.
∙ Fully synthetic oil that a strong protective lubrication film offers against mechanical and thermal stress.
∙ 1…

2 Stroke oil Eurol TTX 1 Liter Universal

∙ 2-Stroke oil.
∙ Topproduct.
∙ 1 liter.
∙ Synthetic 2-stroke oil for small air and water cooled 2-stroke engines
∙ Eurol TTX ProScoot is a top quality synthetic 2-stroke oil for…

2 Stroke oil SAE 50 (1 Liter) Puch Motorcycle

∙ SAE 50 2 Stroke oil.
∙ The flash point is extremely low so there is no/little smoke development.
∙ The clutch neither sticks or slips.
∙ The oil can also be used as front…

Gear oil Eurol 350ML (Z50 engine)∙ Gear oil
∙ Suitable for all Manual or foot gear engines (Z50 engine)
∙ 350ML.
∙ Eurol.

Engine oil change set Puch Maxi (250ml)

∙ Engine oil change set for Puch Maxi e50 engine.

Complete set with:

∙ ATF llD engine oil Eurol (250ml)
∙ Oil fill bolt.
∙ Fiber washer oil fill bolt.
∙ Oil drain bolt.
∙…

ATF engine oil Eurol (250ml)

∙ ATF oil For Puch e50 engines.
∙ 250ml.

E10 Fuel Fighter Fuel addition Putoline 250ML

∙ Putoline E10 Fuel Fighter
∙ 250ML
∙ Fuel addition to protect the fuel system from the harmful effects of E10 fuels, which are 10% bioethanol.

Characteristics:

∙ Protects…

Barrel bearing set 28 x 19.4 x 7.5mm Puch 2 / 3 / 4 Gear

∙ Barrel bearing set.
∙ 3-Pieces.

Complete set with:

∙ 1x Outer ring 28 x 19.4 x 7.5mm.
∙ 1x Bearing ring 27.8 x 16 x 1mm.
∙ 14x Barrel bearing 3.5 x…

Bolt set engine mounting complete Puch Maxi / Z-one / Manet / Korado / Etc

∙ Engine mounting bolt set.
∙ Complete set to mount the engine on the frame!

Complete set with:

∙ 3x Mounting bolt.
∙ 3x Mounting nut…

Cylinder stud mounting set M6 (3D nuts)

∙ Cylinder stud mounting set for Puch Maxi e50 engine.
∙ Galvanized.
∙ M6x103mm.

Complete set with:

∙ 4x Cylinder studs.
∙ 4x M6 nuts extended 3D.
∙ 4x M6 rings.
∙ 2x…

Cylinder stud mounting set M6 (3D nuts)

∙ Cylinder stud mounting set for Puch Maxi e50 engine.
∙ Galvanized.
∙ M6x103mm.

Complete set with:

∙ 4x Cylinder studs.
∙ 4x M6 nuts extended 3D.
∙ 4x M6 rings.

Cylinder stud mounting set complete M6 (Collar nuts)

∙ Cylinder stud mounting set for Puch Maxi e50 engine.
∙ Galvanized.
∙ M6x103mm.

Complete set with:

∙ 4x Cylinder studs.
∙ 4x M6 collar nuts.
∙ 4x M6 nuts.
∙ 4x M6 rings.

Cylinder stud mounting set M6 (Collar nuts)

∙ Cylinder stud mounting set for Puch Maxi e50 engine.
∙ Galvanized.
∙ M6x103mm.

Complete set with:

∙ 4x Cylinder studs.
∙ 4x M6 collar nuts.

Exhaust/intake studs set M6

∙ Exhaust/intake studs set.
∙ 2x Stud (M6)
∙ 2X Flange nut (M6)
∙ M6x32mm.

Suitable for:​

∙ Puch.

Mounting set inlet manifold / cylinder 10mm - 19mm round M6 Puch Maxi

∙ Mountingset / assembly inlet manifold.
∙ Complete set for mounting a 10mm - 19mm inlet manifold with a round inlet on the cylinder.

Complete set…

Mounting set inlet manifold / cylinder 10mm - 15mm round M6 Puch Maxi

∙ Mountingset / assembly inlet manifold.
∙ Complete set for mounting a 10mm - 15mm inlet manifold with a round inlet on the cylinder.

Complete set…

Mounting set inlet manifold / cylinder 10mm - 15mm sqaure M6 Puch Maxi

∙ Mountingset / assembly inlet manifold.
∙ Complete set for mounting a 10mm - 15mm inlet manifold with a square inlet on the cylinder.

Complete set…

Mounting set exhaust / cylinder 25mm - 28mm exhaust manifold M6 Puch

∙ Mountingset / assembly set exhaust.
∙ Complete set for mounting a exhaust with a exhaust manifold of 25mm - 28mm on the cylinder.
∙ The set comes with…

Mounting set exhaust / cylinder 18mm - 22mm exhaust manifold M6 Puch

∙ Mountingset / assembly set exhaust.
∙ Complete set for mounting a standard exhaust with a exhaust manifold of 18mm - 22mm on the cylinder.
∙ The set…

Stud crank case / cylinder 120mm M8 > M6 Puch

∙ Stud.
∙ To be used for mounting the cylinder on the engine.
∙ If the screw thread in the engine is broken, you can easily solve this with these adapter studs!
∙ Hardened…

Stud crank case / cylinder 116mm M7 > M6 Puch

∙ Stud.
∙ To be used for mounting the cylinder on the engine.
∙ If the screw thread in the engine is broken, you can easily solve this with these adapter studs!
∙ Hardened…

Stud crank case / cylinder 105mm M6 Puch

∙ Stud.
∙ To be used for mounting the cylinder on the engine.
∙ Hardened Qaulity!
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Length: 105mm.

Suitable for:

∙ Puch Engines.

Stud intake / exhaust 30mm M8 > M6 Puch

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ If the screw thread in the cylinder is broken, you can easily solve this with these adapter studs!
∙ Thread:1.25!
∙…

Stud intake / exhaust 30mm M7 > M6 Puch

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ If the screw thread in the cylinder is broken, you can easily solve this with these adapter studs!
∙ Hardened…

Stud intake / exhaust 30mm M8 > M6 Puch

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ If the screw thread in the cylinder is broken, you can easily solve this with these adapter studs!
∙ Galvanized!
∙ A…

Stud intake / exhaust 35mm M6 Puch

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ Hardened Qaulity!
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Length: 35mm.

Suitable for:

∙ Puch Engines.

Engine case bolt set (ZA50 engine)

∙ For ZA50 engine.
∙ Engine case bolt set.
∙ Flat head.

Engine case bolt set complete (ZA50 engine)

∙ For ZA50 engine.
∙ Engine case bolt set.
∙ Complete set.
∙ Flat head.

Clutch cover bolt set (ZA50 engine)∙ For ZA50 engine.
∙ Clutch cover bolt set.
∙ Flat head.

Bolt set mounting clutch cover Stainless steel 7-Pieces Puch MV

∙ Bolt mounting set / Boltset assembly clutch cover.
∙ Stainless steel.
∙ 7-Pieces.

Suitable for:

∙ Puch MV.
∙ Etc.

Needle bearing piston pin smallend Jasil 15 x 15 x 12 Puch models

∙ Needle bearing piston pin small end / crankshaft.
∙ For 12mm piston pin.
∙ 15 x 15 x 12.
∙ Jasil.

Measurements:

∙ Width: 15mm.
∙ Outer diameter:…

Needle bearing piston pin smallend 15 x 15 x 12 Puch models

∙ Needle bearing piston pin small end / crankshaft.
∙ For 12mm piston pin.
∙ 15 x 15 x 12.

Measurements:

∙ Width: 15mm.
∙ Outer diameter: 15mm.
∙ Inner…

Pistonpin 12x37mm 74cc (47mm)

∙ Piston pin.
∙ For 74cc piston (47mm)
∙ 12x37mm.

Pistonpin 12x33mm 60cc-70cc (40-45mm)

∙ Piston pin.
∙ For 60cc till 70cc piston (40-45mm)
∙ 12x33mm.

Pistonpin 12x30mm 50cc (38mm)

∙ Piston pin.
∙ For 50cc piston (38mm)
∙ 12x30mm.

Piston pin clip 12mm Malossi

∙ Piston pin clip.
∙ G model.
∙ 12mm.
∙ A Piece.
∙ Malossi.
∙ Original Malossi article number:36-1806.

Piston pin clip set (12mm)

∙ 12mm.
∙ 2 Pieces.

Piston pin clip set (10mm)

∙ 10mm.
∙ 2 Pieces.

Oil fill/drain bolt set Puch Maxi

Complete set with:

∙ Oil fill bolt.
∙ Fiber washer oil fill bolt.
∙ Oil drain bolt.
∙ Fiber washer oil drain bolt.

Suitable for:

∙ Puch Maxi.

Oil fill bolt Puch Maxi

∙ Oil fill bolt.
∙ A Piece.

Suitable for:

∙ Puch Maxi.

Oil fill drain Puch Maxi

∙ Oil drain bolt.
∙ A Piece.

Suitable for:

∙ Puch Maxi.

Oil drain bolt M8x1.25 Magnetic Racing Aluminium Red Puch Maxi

∙ Oil drain bolt.
∙ Magnetic model.
∙ This magnetic fill bolt collects metal pieces out the oil and reduces wear in the enigne.
∙ Aluminium.
∙ Red.
∙ Bolt…

Oil drain bolt M8x1.25 Magnetic Racing Aluminium Gold Puch Maxi

∙ Oil drain bolt.
∙ Magnetic model.
∙ This magnetic fill bolt collects metal pieces out the oil and reduces wear in the enigne.
∙ Aluminium.
∙ Gold.
∙…

Oil drain bolt M8x1.25 Magnetic Racing Aluminium Black Puch Maxi

∙ Oil drain bolt.
∙ Magnetic model.
∙ This magnetic fill bolt collects metal pieces out the oil and reduces wear in the enigne.
∙ Aluminium.
∙ Black.
∙…

Oil drain bolt M8x1.25 Magnetic Racing Aluminium Zilver Puch Maxi

∙ Oil drain bolt.
∙ Magnetic model.
∙ This magnetic fill bolt collects metal pieces out the oil and reduces wear in the enigne.
∙ Aluminium.
∙…

Oil fill bolt (Kickstart clutch cover)

∙ A piece.
∙ For the replica kickstart clutch cover.

Fibre washer oil fill bolt

∙ A piece.
∙ (Photo 2 is a example photo)

Fibre washer oil drain bolt

∙ A piece.
∙ (Photo 2 is a example photo)

Oil fill plug black (ZA50/Z50 engine)

∙ For Puch ZA50/Z50/MV/VS/DS engine.
∙ Plastic/Rubber.
∙ Black.

Oil fill plug grey (ZA50/Z50 engine)

∙ For Puch ZA50/Z50/MV/VS/DS engine.
∙ Plastic/Rubber.
∙ Grey.

Woodruff key flywheel

∙ A piece.

Woodruff key clutch Puch Maxi e50

∙ Woodruff key.
∙ Crankshaft key clutch.
∙ Clutch side.
∙ A Piece.

Measurements:

∙ Length: 12.65mm.
∙ Height: 5mm.
∙ Width: 3mm.

Suitable for:

∙ Puch Maxi e50 Push-start /…

Assortiment set small material Puch Maxi (53-Pieces)

∙ Assortiment set.
∙ Small material Various common used parts for Puch Maxi)
∙ 53-Pieces.

Complete set with:

∙ 5x Woodruff key flywheel.
∙ 5x Flywheel nut.
∙ 5x…

Starter unit (ZA50 engine)

∙ For Puch ZA50 engine.
∙ Complete starter unit.
∙ Guide nut, Pull bolt, Starter cable.

Rubber thule starter unit/brake light switch (ZA50 engine)

∙ For Puch ZA50 engine starter unit/brake light switch and spark plug cable.
∙ Rubber.
∙ Length:45mm.
∙ Diameter:19/10mm.
∙ Universal.

Kickstart gear spring

∙ For kickstart engines and the kickstart conversion kits.
∙ (Photo 2 is a example photo)

Kickstart ring

∙ For kickstart engines and the kickstart conversion kits.
∙ (Photo 2 is a example photo)

Kickstart spring

∙ For kickstart engines and the kickstart conversion kits.
∙ (Photo 2 is a example photo)

Kickstart clutch cover shim washers

∙ For Puch e50 kickstart engines and the kickstart conversion kits.
∙ 14x20x0,5
∙ A piece.
∙ (Photo 2 is a example photo)

Kickstart pedal curved chrome Puch Maxi E50 / ZA50 / Z50

∙ Kickstartpedal / lever.
∙ Curved model.
∙ Chrome.

Suitable for:

∙ Puch Maxi E50 kickstart egnines.
∙ Puch Maxi ZA50 kickstart engines.
∙ Puch Maxi Z50…

Kickstart pedal straight chrome Puch Maxi E50

∙ Kickstartpedal / lever.
∙ Straight model.
∙ Chrome.

Suitable for:

∙ Puch Maxi E50 kickstart egnines.

Kickstart pedal set straight black complete Puch Maxi e50

∙ Kickstartpedal / lever.
∙ Complete set.
∙ Straight model.
∙ Black.

Complete set with:

∙ Kickstartpedal black.
∙ Rubber with Puch print.
∙ Mounting…

Kickstartpedal with rubber chrome Puch MS/DS/VS/VZ

∙ Kickstartlever.
∙ Chrome.
∙ Complete with rubber.

Suitable for:

∙ Puch MS50.
∙ Puch VS50.
∙ Puch DS50.
∙ Puch VZ50.

Kickstart lever rubber (A-Qaulity)

∙ Kickstart lever rubber.
∙ A-Qaulity.
∙ Without Logo.
∙ Inner diameter:7.5mm.

Kickstart lever rubber (Puch Logo)

∙ Kickstart lever rubber.
∙ With Puch Logo.
∙ Inner diameter:9mm.

Kickstart lever rubber

∙ Kickstart lever rubber.
∙ Without Logo.
∙ Inner diameter:9.5mm.

Kickstart key/Pedal key (9.5mm)

∙ 9.5mm.
∙ For Puch e50 kickstart engine and kickstart conversion kit.
∙ Also suitable for pedals.
∙ A piece.

Kickstart key/Pedal key (9.0mm)

∙ 9.0mm.
∙ For Puch e50 kickstart engine and kickstart conversion kit.
∙ Also suitable for pedals.
∙ A piece.

Kickstartpedal mounting set Puch Magnum X

∙ Kickstartpedal mounting set.
∙ To mount a turnable kickstart pedal.

Suitable for:

∙ Puch Magnum X.

Hub Kickstarter Puch Magnum X

∙ Hub kickstarter pedal.
∙ To mount a turnable kickstart pedal.

Suitable for:

∙ Puch Magnum X.
∙ Puch MC125.

Ball / Spring kickstart Puch Magnum X

∙ Ball / spring.
∙ To mount a turnable kickstart pedal.

Suitable for:

∙ Puch Magnum X.
∙ Puch MC125.
∙ Puch M50.

Spacer kickstart pedal (Z50 engine)∙ For Puch Z50 engine.
∙ Spacer for the kickstart pedal.
∙ Outer diameter:12mm.
∙ Inner diameter:10mm.
∙ Heigth:7.5mm.

Gearshift shaft (Puch Z50 motor)∙ Gearshift shaft.
∙ Chromed.
∙ Connection between gearhandle and gearshift arm.
∙ Original Puch article number:320.1.14.002.1.

Suitable for:

∙ Puch Z50 motor.

Kickstart clutch cover bolt set

∙ 5x M6 bolts.

Clutch cover black Puch Dart/Mini Maxi

∙ Clutch lid.
∙ Black.

Suitable for:

∙ Puch Mini Maxi.
∙ Puch Dart.

Push-start clutch lever

∙ For Puch e50 Push-start engines.

Clutch start axle Puch E50 Push-start engine

∙ Clutch start shaft.

Suitable for:

∙ For Puch E50 push / pedal start engines.

Push-start torsie spring

∙ For Puch e50 Push-start engines.

Push-start rubber ring clutch lever

∙ Rubber ring for below the Push-start clutch lever.
∙ For Puch Maxi.

Push-start O-Ring clutch shaft

∙ O-Ring for the clutch shaft.
∙ For Puch e50 Push-start engines.

Push-start clutch lever circlip

∙ For Puch e50 Push-start engines.

Push-start clutch cover bolt set

∙ 4x M6 bolts.
∙ As original.
∙ Stainless steel.

Flywheel nut Kokusan ignition 14mm (M10X1)

∙ Flywheel nut.
∙ M10x1.
∙ Length:14mm.
∙ For Kokusan ignition.
∙ A Piece.

Flywheel collar nut increased (M10X1)

∙ Flywheel collar nut.
∙ Increased collar model.
∙ M10x1.
∙ A Piece.

Measurements:

∙ Wrench width:17mm.
∙ Heigth:15mm.
∙ Diameter collar:22mm.

Suitable for:

∙ Puch.

Flywheel nut (M10x1)

∙ Flywheel nut.
∙ M10x1.
∙ A Piece.

Bleed nipple (7mm Thread)

∙ Bleed nipple.
∙ Universal.
∙ 7mm Thread.

Choke handle Puch MV/VS/DS etc. (Bing carburetor)

∙ Choke handle.
∙ For Bing carburetor.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Etc.

Kickstart stop Puch 4 gear

∙ Kickstart stop.
∙ Length: 60mm.

Suitable for:

∙ Puch 4 gear.

Kickstart pedal Puch MS/DS/VS/VZ (Chrome)

∙ Kickstart pedal/lever.
∙ Chromed.

Suitable for:

∙ Puch MS50.
∙ Puch VS50.
∙ Puch DS50.
∙ Puch VZ50.

Locking plate drive shaft Puch MS/DS/VS/VZ/Etc

∙ Locking plate drive shaft.

Suitable for:

∙ Puch models with 3 gears.
∙ Puch MS.
∙ Puch MV.
∙ Puch DS.
∙ Puch VS.
∙ Puch VZ.
∙ Puch MC.
∙ Etc.

Kickstart spring Puch 4 gear

∙ Internal kickstart pedal spring.
∙ Suitable for Puch 4 gear engines.

Suitable for:

∙ Puch DS50 (4 gear)
∙ Puch VZ50 (4 gear)
∙ Puch M50Racing (With kickstart pedal)
∙ Puch Monza/Grandprix.

Kickstart spring Puch MV/VS/MS/VZ/DS

∙ Kickstart spring.
∙ For Puch 3 gear engines.

Suitabe for:

∙ Puch MV.
∙ Puch VS.
∙ Puch MS.
∙ Puch VZ.
∙ Puch DS.

Cooling cap cylinder Puch MV/VS

∙ Cooling cap cylinder.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch VS.

Cooling case inside Puch MV/VS etc.

∙ Cooling case inside.
∙ For models with forced cooling.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Etc.

Cooling fan cover ignition Puch DS/VS/VZ (New model)

∙ Cooling fan cover ignition.
∙ New model.

Suitable for:

∙ Puch DS.
∙ Puch VS.
∙ Puch VZ.

Cooling case outside Puch MV/VS etc.

∙ Cooling case outside.
∙ For models with forced cooling.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Etc.