Wiring Harness Model with Ignition Lock Puch Monza / Grand Prix / N50

∙ Wiring harness.
∙ Model with ignition lock.

Pay attention! There have been various versions, possibly. adjust the wiring harness yourself.

Suitable…

Wiring Harness Model without Ignition Lock Puch Monza / Grand Prix / N50

∙ Wiring harness.
∙ Model without ignition lock.

Pay attention! There have been various versions, possibly. adjust the wiring harness…

Wiring Harness Model for Flashers Puch Monza / Grand Prix / N50

∙ Wiring harness.
∙ Model for flashers.

Pay attention! There have been various versions, possibly. adjust the wiring harness yourself.

Suitable for:

∙ Puch…

Wiring Harness Model for Flashers Puch Monza / N50

∙ Wiring harness.
∙ Model for flashers.

Pay attention! There have been various versions, possibly. adjust the wiring harness yourself.

Suitable for:

∙ Puch Monza.
∙ Puch N50.

Wiring Harness Handlebar Switch + Rear Light Ccomplete Puch Maxi

∙ Wire harness complete.
∙ From the engine to the headlight & switch.
∙ From the engine to the taillight.

Pay attention! the wiring harness has no wire for a…

Wiring Harness Handlebar Switch Puch Maxi

∙ Wire harness handlebar.
∙ From the engine to the headlight & switch.

Pay attention! the wiring harness has no wire for a horn.

Suitable for:

∙ Puch Maxi Models.

Wiring Harness Rear Light Complete Puch Maxi

∙ Wire set tailight.
∙ From the engine to the taillight

Complete set with:

∙ Wiring harness.
∙ Mass clamps.
∙ Separate plug for the taillight

Suitable for:

∙ Puch Maxi Models.

Wiring Harness Complete Puch Maxi P / K

∙ Wiring harness / wire set.
∙ Complete.

Suitable for:

∙ Puch Maxi P / K.

Electric Wire set Wiring Harness 9 x 3 Meter - 1.0mm² Universal

∙ Electric wire.
∙ Total of 9 colors.
∙ every color is 3 meter.
∙ Diameter core 1.0mm².
∙ To use for cable tree wiring various mopeds.

Suitable…

Wiring harness 6 Volt / 12 Volt Kokusan Electronic Ignition Universal

∙ Wiring harness.
∙ Suitable for a Electronic Kokusan igniton.
∙ 6 Volt & 12 Volt.

Suitable for:

∙ Universal to use on various moped models.
∙ Puch…

Electric Wire set Taillight - Brakelight Grey - Blue Puch MV / MS / VS / Etc

∙ Wiring set rear lighting.
∙ Wiring to run through the frame for the rear light - brake light.
∙ Extra stiff wire!
∙ Length: 2 x 1.5…

Outer Cover Electric Wire 220cm Puch MV / MS / VS / Etc

∙ Wiring cover.
∙ Galvanized steel.
∙ Wiring cover to pull through the frame to protect the electric wires of, for example, the rear light.

Measuements:

∙ Length:…

Outer Cover Electric Wire 100cm Puch MV / MS / VS / Etc

∙ Wiring cover.
∙ Wiring cover to pull through the frame to protect the electric wires of, for example, the rear light.
∙ Length: 1 Meter.

Suitable for:

∙ Puch…

Gauge fitting with light universal (12 Volt 1.2 Watt)

∙ Gauge fitting with light.
∙ For universal use.
∙ Diameter rubber fitting:0.9cm.
∙ 12 Volt.
∙ 1.2 Watt.

Stop button + wire Original! Puch Maxi P1

∙ Stopbutton + wire.
∙ Assembly on handlebar piece.
∙ N.O.S, New Old Stock Original Puch!
∙ Domino!

Suitable for:

∙ Puch Maxi P1 Models.

Handlebar switch 3 modes with wiring harness Puch Maxi

∙ Handlebar switch.
∙ Complete with wiring harness.
∙ From the engine to the headlight & switch.
∙ Taillight wiring harness not included (Look related products)

Pay…

Handlebar switch 3 modes with wiring harness Merit Puch Maxi

∙ Handlebar switch.
∙ Model: Merit complete with wiring harness.
∙ From the engine to the headlight & switch.
∙ Taillight wiring harness not included (Look…

Handlebar switch 3 modes Merit Puch Maxi

∙ Handlebar switch.
∙ Model: Merit complete with wiring harness.

​3 Modes:

∙ Light switch.
∙ Claxon button.
∙ Motor kill switch.

Suitable for:

∙ Puch Maxi Models.

Handlebar switch 3 modes GUIA Puch Maxi

∙ Handlebar switch.
∙ Original GUIA made in Spain!

​3 Modes:

∙ Light switch.
∙ Claxon button.
∙ Motor kill switch.

Suitable for:

∙ Puch Maxi Models.

Handlebar switch 2 modes Merit Puch MV / MS / VS

∙ Handlebar switch.
∙ Model: Merit complete with wiring harness.

2 Modes:

∙ Light switch.
∙ Motor kill switch.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.

Handlebar switch 3 modes Black Puch Maxi

∙ Handlebar switch.
∙ Black model.

​3 Modes:

∙ Light switch.
∙ Claxon button.
∙ Motor kill switch.

Suitable for:

∙ Puch Maxi Models.

Pull switch Black Short Universal

∙ Pull switch.
∙ Black.
∙ Short model.
∙ Build-in Screw-thread M8.

Suitable for:

∙ Universal to use on various moped models.

Pull switch Black Long Universal

∙ Pull switch.
∙ Black.
∙ Long model.
∙ Length Screw-thread: 18mm.
∙ Build-in Screw-thread M8.

Suitable for:

∙ Universal to use on various moped models.

Dipswitch Switch Big Universal

∙ Dipswitch Switch.
∙ 2 modes.
∙ Big model.
∙ Build-in.

Measurements:

∙ Length: 13mm.
∙ Height: 10mm.

Suitable for:

∙ Universal to use on various moped models.

Dipswitch Mini switch Small Universal

∙ Dipswitch mini switch.
∙ 2 modes.
∙ Small model.
∙ Build-in.

Measurements:

∙ Length: 8mm.
∙ Height: 7mm.
∙ Total Height: 22mm.

Suitable for:

∙ Universal to use on various moped models.

Push switch Black / Red Round Universal

∙ Push switch.
∙ Black / Red.
∙ Round model.
∙ Build-in Screw-thread M10.

Suitable for:

∙ Universal to use on various moped models.

Handlebar switch Magura handle left

∙ Handlebar switch.
∙ For original Magura handle left.
∙ Red button horn switch/stop switch.
∙ Black button to front is lighting on.
∙ Black button to back is stop switch.

Suitable…

Handlebar switch turn signal Magura handle right

∙ Turn signal handlebar switch.
∙ For original Magura handle right.

Suitable for:

∙ Various Puch models.
∙ Various Zundapp models.
∙ Kreidler.

Voltage regulator HPI 2-TEN Ignition

∙ Voltage regulator.
∙ Suitable on all HPI 2-TEN ignitions.
∙ Comes with a mounting manual.

Suitable for:

∙ Universal to use on various moped models.

Voltage regulator 12 Volt Kokusan Electronic Ignition Universal

∙ Voltage regulator.
∙ Suitable for a Electronic Kokusan igniton.
∙ 12 Volt.

Suitable for:

∙ Universal to use on various moped models.
∙ Puch Models.
∙…

Voltage regulator 6 Volt Kokusan Electronic Ignition Universal

∙ Voltage regulator.
∙ Suitable for a Electronic Kokusan igniton.
∙ 12 Volt.

Suitable for:

∙ Universal to use on various moped models.
∙ Puch Models.
∙…

Voltage regulator LED Bulbs 6 Volt Universal

∙ Voltage regulator.
∙ For 6 Volt LED bulbs on Alternate Current ( AC )
∙ With double sided tape.

Suitable for:

∙ Universal to use on various moped models.

Voltage Regulator 5-Pins 12 Volt - 100W + Horn MVT Ignition / Universal

∙ Voltage regulator.
∙ 12 volt.
∙ 100 Watt.
∙ 5-Pins.

Suitable for:

∙ Universal to use on various moped models.
∙ MVT Ignition.

Voltage Regulator 12 Volt Universal

∙ Voltage regulator.
∙ 12 Volt.

Measurements:

∙ Length total: 45mm.
∙ Height total: 16mm.
∙ Diameter mounting hole: 6mm.

Suitable for:

∙ Universal to use on various moped models.

Voltage Regulator 6 Volt Universal

∙ Voltage regulator.
∙ 6 Volt.

Measurements:

∙ Length total: 45mm.
∙ Height total: 16mm.
∙ Diameter mounting hole: 6mm.

Suitable for:

∙ Universal to use on various moped models.

Light coil single Wire 12 Volt - 35 Watt Model Bosch Puch

∙ Lightcoil.
∙ Plug & Play remove the 6 Volt light coil and mount the 12 Volt light coil and you can use 12 volt light bulbs.
∙ Model Bosch.
∙ Single wire.
∙ 12…

Light coil Single wire 6 Volt - 15 Watt Model Bosch Puch

∙ Lightcoil.
∙ Model Bosch.
∙ Single wire.
∙ 6 Volt - 15 Watt.

Measurements:

∙ Centre to Centre Mounting: 54mm.
∙ Diameter Mounting holes: 4mm.

Suitable…

Blinker relay 2-pins (12 Volt 1 till 100 Watt)

∙ Blinker relay.
∙ 12 Volt.
∙ 1 till 100 Watt.
∙ 2-Pins version.

Blinker relay 3-pins (12 Volt 1 till 100 Watt)

∙ Blinker relay.
∙ 12 Volt.
∙ 1 till 100 Watt.
∙ 3-Pins version.

Brake light Switch Puch Monza / Grand Prix / M50 Racing / VZ50 / Etc

∙ Brakelight switch.

Measurements:

∙ Length: 31mm.
∙ Diameter: 19mm.

Suitable for:

∙ Puch Monza GP.
∙ Puch M50 Racing.
∙ Puch VZ50.
∙…

Brake light switch Oldtimer Universal

∙ Brake light switch.
∙ Complete set.
∙ Oldtimer.
∙ Black.

Complete set with:

∙ Brake light switch.
∙ Spring.
∙ Bolt and Nut.

Suitable for:

∙ Universal to use on various moped models.

Light resistor (6 Volt)

∙ Light resistor.
∙ To be used between the light thread.
∙ Against the burning of the rear light
∙ 6 Volt.

Odometer/control light fitting universal

∙ Odometer/control light fitting.
∙ Universal.
∙ For T10 light bulb.