Rebuild set Complete Carburetor Dellorto PHBG

∙ Rebuild set / reparation set.
∙ Complete set to rebuild your carburetor!

Complete set with:

∙ Float gasket.
∙ Throttle Cover Gasket.
∙ Air adjusting screw + spring.
∙…

Clamp gas needle carburetor Dellorto PHBG

∙ Clamp / Clamp gas needle / gas needle clamp.

Suitable for:

∙ 16mm t/m 21mm Original en Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number:

9596

Throttle drum cover set Old model complete carburetor Dellorto PHBG

∙ Throttle drum cover set.
∙ Complete set.
∙ Old model.

Complete set with:

∙ Throttle drum cover set.
∙ Mounting bolts + washers.
∙ Gasket.
∙…

Throttle drum cover set Original Old model carburetor Dellorto PHBG

∙ Throttle drum cover set.
∙ Old model.
∙ Original Dellorto!

Complete set with:

∙ Throttle drum cover set.
∙ Mounting bolts + washers.

Suitable…

Mounting bolts Throttle drum cover carburetor Dellorto PHBG

∙ Mounting set throttle drum cover.

Complete set with:

∙ 2x Mounting bolts.
∙ 2x Mounting Washers.

Suitable for:

∙ 16mm t/m 21mm Original en Replica Dellorto…

Throttle drum cover Old model carburetor Dellorto PHBG

∙ Throttle drum cover / Throttle cover.
∙ Old model.

Suitable for:

∙ 16mm t/m 21mm Original en Replica Dellorto PHBG Carburetor.

Identical to Dellorto article…

Throttle drum cover with elbow adjusting New model carburetor Dellorto PHBG

∙ Throttle drum cover / Throttle cover.
∙ New model.
∙ Elbow 360 Degrees turnable.
∙ Connection for adjustment screw M5 x 0.75.

Suitable…

Throttle drum spring carburetor Dellorto PHBG

∙ Throttle drum spring.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number:

9597

Choke Manually Replica Carburetor Dellorto PHBG

∙ Handchoke / Hand choke.
∙ Manually.
∙ Can also be used for the conversion of your carburetor from cable choke to hand choke.
∙ Replica model!

Suitable for:

∙ 16mm t/m…

Choke Cable control carburetor Dellorto PHBG

∙ Cable choke / Cablechoke.
∙ Cable control.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number:

Floater set caburetor Dellorto PHBG

∙ Floater set.

Complete set with:

∙ Floater.
∙ Float pin.
∙ Float needle.
∙ Gasket Floattank.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG…

Floater caburetor Dellorto PHBG

∙ Floater.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number:

Throttle drum set carburetor Dellorto PHBG

∙ Throttle drum set.

Complete set with:

∙ Throttle drum.
∙ Throttle needle.
∙ Throttle drum spring.
∙ Throttle spring washer.

Suitable for:

∙ 16mm t/m 21mm Original and…

Mounting Clamp complete carburetor Dellorto PHBG

∙ Mounting / Mounting clamp set.
∙ Inner diameter: 30mm.

Complete set with:

∙ 1x Mounting clamp.
∙ 1x Mounting bolt.
∙ 1x Mounting nut.

Suitable for:

∙ 16mm t/m…

Mounting Clamp carburetor Dellorto PHBG

∙ Mounting / Mounting Clamp.
∙ Inner diameter: 30mm.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

8129

Bolt mounting clamp carburetor Dellorto PHBG

∙ Mounting clamp bolt / Clamp bolt.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

8127

Nut mounting clamp carburetor Dellorto PHBG

∙ Mounting clamp Nut / Clamp nut.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number:

8128

Float needle carburetor Dellorto PHBG / SHA

∙ Float needle.
∙ Original Dellorto.
∙ With fuel resistant rubber tip!
∙ Solid bronze.

Suitable for:

∙ Originele Dellorto PHBG / SHA Carburateur.

Identical to Dellorto…

Idle screw + spring carburetor Dellorto PHBG

∙ Idle screw with spring.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number:

7673 / 4670

Idle screw carburetor Dellorto PHBG

∙ Idle screw.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

7673

Spring idle screw carburetor Dellorto PHBG

∙ Spring idle screw.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number:

4670

Float pin caburetor Dellorto PHBG

∙ Float pin.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number:

9506

Elbow adjusting screw 90 degrees complete Original carburetor Dellorto PHBG

∙ Elbow adjusting screw.
∙ 90 degrees.
∙ Complete with elbow adjusting screw and rubber.
∙ Screw-thread carburetor mounting is M6 x…

Elbow adjusting screw 40 degrees complete Original carburetor Dellorto PHBG

∙ Elbow adjusting screw.
∙ 40 degrees.
∙ Complete with elbow adjusting screw and rubber.
∙ Screw-thread carburetor mounting is M6 x…

Elbow adjusting 40 degrees carburetor Dellorto PHBG

∙ Elbow adjusting.
∙ 40 degrees.
∙ Without adjusting bolt.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article…

Elbow adjusting 90 degrees carburetor Dellorto PHBG

∙ Elbow adjusting.
∙ 90 Graden.
∙ Without adjusting bolt.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article…

Adjusting bolt Throttle cable carburetor Dellorto PHBG / SHA

∙ Adjusting bolt.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.
∙ 15/15 - 16/16 Dellorto SHA carburetor.

Identical to Dellorto…

Rubber adjusting bolt throttle cable carburetor Bing / Dellorto PHBG / SHA

∙ Grommet / Rubber adjusting bolt.
∙ Rubber placed over the trottle cable / Adjusting bolt.

Suitable for:

∙ 16mm t/m 21mm Original and Replica…

Rubber adjusting bolt throttle cable long 36mm carburetor Bing / Dellorto PHBG / SHA

∙ Grommet / Rubber adjusting bolt.
∙ Long model.
∙ Lenght: 36mm
∙ Rubber placed over the trottle cable / Adjusting bolt.

Suitable…

Nylon bush 26mm -> 24mm carburetor Dellorto PHBG

∙ Nylon bush.
∙ Bush mounted in the carburetor, needed for mounting on a 24mm manifold, Reducer of 26mm to 24mm.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto…

Venturi carburetor Dellorto PHBG

∙ Venturi.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

9511

Jetstock carburetor Dellorto PHBG

∙ Jetstock.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

9654.262

Throttle spring washer caburetor Dellorto PHBG

∙ Throttle spring washer / Throttle needle.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

9483

Throttle Needle Carburetor Dellorto PHBG

∙ Gas needle.

Suitable for:

∙ 16mm - 21mm Original & Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

Throttle Drum Carburetor Dellorto PHBG

∙ Throttle drum.

Suitable for:

∙ 16mm - 21mm Original & Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

Air adjusting screw set carburetor Dellorto PHBG

∙ Air adjusting screw set.
∙ Original Dellorto!

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number:

9517 /…

Air adjusting screw carburetor Dellorto PHBG

∙ Air adjusting screw.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

9517

Spring Air Adjusting Screw Carburetor Dellorto PHBG

∙ Spring air adjusting screw.

Suitable for:

∙ 16mm - 21mm Original & Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

9336

Washer Air Adjusting Screw Carburetor Dellorto PHBG

∙ Washer air adjusting screw.

Suitable for:

∙ 16mm - 21mm Original & Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

8260

O-Ring Air Adjusting Screw Carburetor Dellorto PHBG

∙ O-Ring / Rubber air adjusting screw.

Suitable for:

∙ 16mm - 21mm Original & Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

Level Slide Carburetor Dellorto PHBG

∙ Level slide.

Suitable for:

∙ 16mm - 21mm Original & Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

9779

Choke Manually Original! Carburetor Dellorto PHBG

∙ Handchoke / Hand choke.
∙ Manually.
∙ Can also be used for the conversion of your carburetor from cable choke to hand choke.
∙ Original model!

Suitable for:

∙ 16mm…

Drain Bolt Float Tank Cap Carburetor Dellorto PHBG Racing

∙ Drain bolt floater tank / bowl.

Suitable for:

∙ Dellorto PHBG Racing Carburetor (Aluminium float tank cap)

Identical to Dellorto article number

9812

Float tank Metal! Black carburetor Dellorto PHBG

∙ Float tank.
∙ Black.
∙ Metal!
∙ Without drainbolt.

Suitable for:

∙ 16mm t/m 21mm Original en Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

Floattank Plastic Black Carburetor Dellorto PHBG

∙ Floattank.
∙ Black.
∙ Plastic.

Suitable for:

∙ 16mm t/m 21mm Original and Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number:

9444

Float Tank Cap Malossi! Carburetor Dellorto PHBG

∙ Floater tank / bowl.
∙ Transparent model.
∙ Malossi!

Suitable for:

∙ 16mm - 21mm Original & Replica Dellorto PHBG Carburetor.

Malossi article number

30-3338

Float Tank Cap set Transparent Carburetor Dellorto PHBG

∙ Floater tank / bowl.
∙ Transparent model.
∙ Complete set with gaskets & mounting bolts.

Pay attention! Do not overtighten the bolts.

Suitable for:

∙ 16mm - 21mm…

Float Tank Cap With Drain Plug Malossi! Carburetor Dellorto PHBG

∙ Floater tank / bowl.
∙ Transparent model.
∙ With drain plug to easily change nozzles quickly (Note! tighten the plug hand-tight)
∙ Malossi!

Suitable…

Gasket set complete carburetor Dellorto PHBG

∙ Gasket set.
∙ Complete set.

Complete kit with:

∙ 1x Float tank gasket.
∙ 1x Throttle drum gasket.
∙ 3x Fiber gasket.

Suitable for:

∙ 16mm t/m 21mm Original and…

Mounting set Float tank carburetor Dellorto PHBG

∙ Mountingset / Gasketset float tank.

Complete kit with:

∙ 1x Float tank gasket.
∙ 4x Mounting bolts.
∙ 1x Mounting washers.

Suitable for:

∙ 16mm t/m 21mm Original…

Gasket Float Tank Carburetor Dellorto PHBG

∙ Gasket Floater tank / bowl.
∙ A Piece.

Suitable for:

∙ 16mm - 21mm Original & Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

Gasket Throttle drum cover carburetor Dellorto PHBG

∙ Gasket Throttle drum cover.

Suitable for:

∙ 16mm t/m 21mm Original en Replica Dellorto PHBG Carburetor.

Identical to Dellorto article number

Fiberring Gasket Drain Plug Float Tank Cap Carburetor Dellorto PHBG

∙ Fiberring gasket drain plug floater tank / bowl.
∙ A Piece.

Suitable for:

∙ 16mm t/m 21mm Original en Replica Dellorto PHBG Carburetor.

Identical to…

Suction funnel 55mm Blue Aluminium Dellorto PHBG

∙ Suctionfunnel
∙ Blue.
∙ Aluminium.

Measurements:

∙ Connection diameter: 38mm.
∙ Outer diameter: 55mm

Suitable for:

∙ Original and Remake Dellorto carburetor.

Suction funnel 60mm Black Dellorto PHBG

∙ Suctionfunnel.
∙ Black.

Measurements:

∙ Connection diameter: 60mm.

Suitable for:

∙ Original and Remake Dellorto carburetor.

Airfilter Reducer Bush 32mm - 38mm Dellorto PHBG

∙ Reducerbush Airfilter.
∙ For mounting multiple sizes air filters.

Measurements:

∙ Reduce: 32mm to 38mm.

Suitable for:

∙ Universal to use on various moped models.
∙…

Airfilter Reducer Bush 35mm Dellorto PHBG

∙ Reducerbush Airfilter.
∙ For mounting multiple sizes air filters.

Measurements:

∙ Outer diameter: 35mm.

Suitable for:

∙ Universal to use on various moped models.
∙…