Revision set complete 4-Bearing push-start (Old model)

Complete revision bearing/seal set for Puch e50 push-start engines 4-Bearing with a old model crankshaft.

∙ Liquid gasket (Red)
∙ ATF llD engine oil Eurol (250ml)
∙…

Revision set complete 4-Bearing push-start (New model)

Complete revision bearing/seal set for Puch e50 push-start engines 4-Bearing with a new model crankshaft.

∙ Liquid gasket (Red)
∙ ATF llD engine oil Eurol (250ml)
∙…

Revision set complete 3-Bearing push-start (Old model)

Complete revision bearing/seal set for Puch e50 push-start engines 3-Bearing with a old model crankshaft.

∙ Liquid gasket (Red)
∙ ATF llD engine oil Eurol (250ml)
∙…

Revision set complete 3-Bearing push-start (New model)

Complete revision bearing/seal set for Puch e50 push-start engines 3-Bearing with a new model crankshaft.

∙ Liquid gasket (Red)
∙ ATF llD engine oil Eurol (250ml)
∙…

Revision set complete 4-Bearing kickstart (Old model)

Complete revision bearing/seal set for Puch e50 kickstart engines 4-Bearing with a old model crankshaft.

∙ Liquid gasket (Red)
∙ ATF llD engine oil Eurol (250ml)
∙…

Revision set complete 4-Bearing kickstart (New model)

Complete revision bearing/seal set for Puch e50 kickstart engines 4-Bearing with a new model crankshaft.

∙ Liquid gasket (Red)
∙ ATF llD engine oil Eurol (250ml)
∙…

Revision set complete 3-Bearing kickstart (Old model)

Complete revision bearing/seal set for Puch e50 kickstart engines 3-Bearing with a old model crankshaft.

∙ Liquid gasket (Red)
∙ ATF llD engine oil Eurol (250ml)
∙…

Revision set complete 3-Bearing kickstart (New model)

Complete revision bearing/seal set for Puch e50 kickstart engines 3-Bearing with a new model crankshaft.

∙ Liquid gasket (Red)
∙ ATF llD engine oil Eurol (250ml)
∙…

ATF Clutch-oil Eurol 1 Liter Puch Maxi / X30 / Universal

∙ ATF Koppelings-oil.
∙ Oil for automatic clutch.
∙ ATF llD.
∙ 1 Liter.
∙ Eurol.

Suitable for:

∙ Puch Maxi e50 engines.
∙ Universal to use for various moped models.

ATF engine oil Eurol (250ml)

∙ ATF oil For Puch e50 engines.
∙ 250ml.

Engine oil change set Puch Maxi (250ml)

∙ Engine oil change set for Puch Maxi e50 engine.

Complete set with:

∙ ATF llD engine oil Eurol (250ml)
∙ Oil fill bolt.
∙ Fiber washer oil fill bolt.
∙ Oil drain bolt.
∙…

Oil fill/drain bolt set Puch Maxi

Complete set with:

∙ Oil fill bolt.
∙ Fiber washer oil fill bolt.
∙ Oil drain bolt.
∙ Fiber washer oil drain bolt.

Suitable for:

∙ Puch Maxi.

Revision kit 4 bearings (New model)

Complete revision bearing/seals kit for Puch E50 engines with a new model crankshaft.

∙ 3x SKF bearing 6203C3.
∙ 1x SKF bearing 6203 NR (Smaller inner ring)
∙ 3x 17/40/7 seals.

∙…

Revision kit 4 bearings (Old model)

Complete revision bearing/seals kit for Puch e50 engines with a old model crankshaft.

∙ 3x bearing 6203C3 NTN.
∙ 1x bearing 6203 NR.
∙ 2x 17/40/7 seal.
∙ 1x 22/40/7 seal.

∙…

Revision kit 3 bearings (New model)

Complete revision bearing/seals kit for Puch E50 engines with a new model crankshaft.

∙ 2x SKF bearing 6203C3.
∙ 1x SKF bearing 6203 NR (Smaller inner ring)
∙ 3x 17/40/7 seal.

∙…

Revision kit 3 bearings (Old model)

Complete revision bearing/seals kit for Puch E50 engines with a old model crankshaft.

∙ 2x bearing 6203C3 NTN.
∙ 1x bearing 6203 NR.
∙ 2x 17/40/7 seal.
∙ 1x 22/40/7 seal.

∙…

Bearing / seal set crankshaft (New model) Puch Maxi e50

Crankshaft bearing / seal set for Puch e50 new model crankshaft.

∙ 1x SKF Bearing 6203C3.
∙ 1x SKF Bearing 6203 NR (Smaller inner ring)
∙ 2x 17/40/7 Seal.

Suitable…

Bearing / seal set crankshaft (Old model) Puch Maxi e50

Crankshaft bearing / seal set for Puch e50 old model crankshaft.

∙ 1x NTN Bearing 6203C3.
∙ 1x NTN Bearing 6203 NR.
∙ 1x 17/40/7 Seal.
∙ 1X 22/40/7 Seal.

Suitable…

Main gear bearing/seals set (4 Bearing engine)

Complete Main gear bearing/seals set for Puch e50 4 bearing engines.

∙ 2x bearing 6203C3 NTN.
∙ 1x 17/40/7 seal.
∙ 1x Snapring

∙ Brand:NTN.

*Click here for more information

Main gear bearing/seals set (3 Bearing engine)

Complete Main gear bearing/seals set for Puch e50 3 bearing engines.

∙ 1x bearing 6203C3 NTN.
∙ 1x 17/40/7 seal.
∙ 1x Snapring.

∙ Brand:NTN.

*Click here for more information

Crankshaft bearing 6203 NR (New model)

∙ Crankshaft bearing.
∙ 6203 NR.
∙ Smaller inner ring.
∙ Outer ring not included!
∙ SKF.

∙ Outer diameter:40mm.
∙ Inner diameter:17mm.
∙ Width:12mm.

*Click here for more information

Bearing 6203 NR NTN

∙ Brand:NTN.

*Click here for more information

Bearing 6203 C3 NTN

∙ Brand:NTN.

*Click here for more information

Bearing 6203 C3 SKF

∙ Brand:SKF

*Click here for more information

Seal crankshaft clutch side OM 22/40/7 NTN Puch Maxi E50

∙ Seal crankshaft OM.
∙ 22 / 40 / 7.
∙ NTN.

Measurements:

∙ Outer diameter: 40mm.
∙ Inner diameter: 22mm.
∙ Thickness: 7mm.

Suitable for:

∙ Puch Maxi /…

Seal crankshaft NM and OM / main gear 17/40/7 NTN Puch Maxi E50

∙ Seal crankshaft NM and OM / drive shaft.
∙ 17 / 40 / 7.
∙ NTN.

Measurements:

∙ Outer diameter: 40mm.
∙ Inner diameter: 17mm.
∙ Thickness:…

Seal crankshaft clutch side OM 22/40/7 A-Qaulity! Viton Puch Maxi E50

∙ Seal crankshaft OM.
∙ 22 / 40 / 7.
∙ Required for Race engines!
∙ Extremely heat resistant!
∙ A-Qaulity!
∙ Viton.

Measurements:

∙ Outer…

Seal crankshaft NM and OM / main gear 17/40/7 A-Qaulity! Viton Puch Maxi E50

∙ Seal crankshaft NM and OM / drive shaft.
∙ 17 / 40 / 7.
∙ Required for Race engines!
∙ Extremely heat resistant!
∙ A-Qaulity!
∙…

Seal crankshaft clutch side OM 22/40/7 A-Qaulity! KACO Puch Maxi E50

∙ Seal crankshaft OM.
∙ 22 / 40 / 7.
∙ Required for Race engines!
∙ A-Qaulity!
∙ KACO.

Measurements:

∙ Outer diameter: 40mm.
∙ Inner diameter:…

Seal crankshaft NM and OM / main gear 17/40/7 A-Qaulity! KACO Puch Maxi E50

∙ Seal crankshaft NM and OM / drive shaft.
∙ 17 / 40 / 7.
∙ Required for Race engines!
∙ A-Qaulity!
∙ KACO.

Measurements:

∙ Outer diameter:…

Main axle/crankshaft bearing snapring

∙ Snapring for the 6203 NR Bearing.
∙ Snapring Main axle (between bearing and seal)
∙ A Piece.

Bearing set with shift bearings (ZA50 engine)Complete bearing set thats needed for a Puch ZA50 engine.

∙ 1x E20 Ball bearing.
∙ 1x L17 Ball bearing (A-Qaulity NSK)
∙ 1X 6203 C3 Ball bearing.
∙ 1x 6005 Ball bearing.
∙ 1x…

Bearing E20 (ZA50 engine)∙ For ZA50 engine.
∙ For crankshaft right side.
∙ Outer diameter:47mm.
∙ Inner diameter:20mm.
∙ Width:12mm.
∙ NSK.

Crankshaft bearing L17 NSK (ZA50/Z50 engine)∙ Crankshaft bearing L17.
∙ A Piece.
∙ NSK.

Suitable for:

∙ ZA50 engine.
∙ Z50 engine.

Bearing 6005 C3 (ZA50 engine)∙ For ZA50 engine.
∙ For main gear.
∙ Outer diameter:47mm.
∙ Inner diameter:25mm.
∙ Width:12mm.
∙ FAG.

Bearing 16100 (ZA50 engine)∙ For ZA50 engine.
∙ For crankcase cover main gear.
∙ Outer diameter:28mm.
∙ Inner diameter:10mm.
∙ Width:8mm.
∙ NSK.

Bearing 6002 (ZA50 engine)∙ For ZA50 engine.
∙ For crankcase cover clutch drum.
∙ Outer diameter:32mm.
∙ Inner diameter:15mm.
∙ Width:9mm.
∙ NSK.

Needlebearing shift axle 16x22x12 (ZA50 engine)∙ For ZA50 engine.
∙ For the shift axle (Internally)
∙ A Piece (2 Needed)

Needlebearing drive shaft B-810 12.7x17.46x15.88 (ZA50 engine)∙ For ZA50 engine.
∙ Needlebearing B-810 Koyo Torrington.
∙ 12.7x17.46x15.88.
∙ For drive shaft.
∙ A piece (2 Needed)

Seal set complete (ZA50 engine)

∙ For ZA50 engine.

Complete set with:

∙ 1x Crankshaft seal right side 20/35/7
∙ 1x Crankshaft seal left side 17/35/7
∙ 1x front sprocket seal 25/35/7

Seal set Viton (ZA50 engine)∙ For ZA50 engine.

Complete set with:

∙ 1x Crankshaft seal right side 20/35/7.
∙ 1x Crankshaft seal left side 17/35/7.

Crankshaft seal 17x35x7 Viton (ZA50 engine)∙ For ZA50/Z50 engines.
∙ Crankshaft seal.
∙ 17x35x7.
∙ Viton.
∙ Extremely heat resistant.

Suitable for:

∙ Crankshaft left and right side Z50 engine.
∙ Crankshaft left…

Crankshaft seal right side 20x35x7 Viton (ZA50 engine)∙ For ZA50 engine.
∙ 20x35x7.
∙ Viton.
∙ Extremely heat resistant.

Suitable for:

∙ Crankshaft right side ZA50 engine.

Sprocket shaft seal 25x35x7 B1 (ZA50 engine)∙ For ZA50 engine.
∙ 25x35x7.
∙ Sprocket shaft seal.

Crankshaft seal 17x35x7 (ZA50/Z50 engine)∙ For ZA50/Z50 engines.
∙ 17x35x7.
∙ Double lip.
∙ Crankshaft seal.

Crankshaft seal 20x35x7 (ZA50 engine)∙ For ZA50 engine.
∙ 20x35x7.
∙ Crankshaft seal.

Bearing set complete (Z50 engine)∙ For Puch Z50 engine.
∙ All bearings included that are needed for the revion of a Z50 engine.
∙ NSK.

Complete set with:

∙ 2x L17 Ball bearing A-Qaulity NSK.
∙ 1X 6202 Ball bearing A-Qaulity NSK.

Bearing 6202 NSK (Z50 engine)∙ For Puch Z50 engine.
∙ 6202 Bearing.
∙ Middle crankcase bearing.
∙ A-Qaulity.
∙ NSK.

Measurements:

∙ Outer diameter:35mm.
∙ Inner diameter:15mm.
∙ Width:11mm.

Suitable for:

∙ Puch Z50.

Crankshaft seal set 17/35/7 Viton (Z50/MS/MV/VS/DS engine)

∙ 2x Crankshaft seal Left side and Right side 17/35/7.
∙ Viton.

Suitable for:

∙ Z50 engine.
∙ MS engine.
∙ MV engine.
∙ VS engine.
∙ DS engine.

Seal set (Z50 engine)

∙ For Z50 engine.

Complete set with:

∙ 1x Crankshaft seal right side 17/35/7
∙ 1x Crankshaft seal left side 17/35/7
∙ 1x Kickstart axle seal 16/28/7
∙ 1x Front sprocker seal 17/28/7

Kickstart axle seal 16x28x7 (Z50 engine)

∙ For Z50 engine.
∙ Kickstart axle seal.
∙ 16x28x7.

Front sprocket axle seal 17x28x7 (Z50 engine)

∙ For Z50 engine.
∙ Front sprocket axle seal.
∙ 17x28x7.

Seal pedal axle Puch MV/VS/MS (16x24x7)

∙ Seal for pedal axle.
∙ Meausrements:16x24x7.
∙ For 2/3 gear foot shift en hand shift engines.

Suitable for:

∙ Puch MV50.
∙ Puch VS50.
∙ Puch MS50.
∙ Puch DS50.

Seal pedal gear axle Puch MV/VS/MS (14x24x7)

∙ Seal for pedal gear axle.
∙ Measurements:14x24x7.
∙ For 2/3 gear foot shift engines.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Puch MS.
∙ Puch DS.

Seal set Puch Monza/X50/Jet 4 gear (5 Pieces)

∙ Seal set.
∙ 5 Pieces.

Suitable for:

∙ Puch Monza (4 gear)
∙ Puch X50 (4 gear)
∙ Puch Jet (4 gear)
∙ Etc.

Crankshaft seal set Puch MV/VS/DS/MS 2/3 gear Viton (17x35x7)

∙ Crankshaft seal set.
∙ 2 Pieces right and left side.
∙ Measurements:17x35x7.
∙ Viton.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch MS.
∙ Etc.

Seal set Puch MV/VS 2/3 gear hand shift (5 Pieces)

∙ Seal set.
∙ 5 Pieces.
∙ For 2 and 3 gear hand shift engines.

Set consists of:

∙ 2x Crankshaft seal (Left and right)
∙ 2x Crank axle seal.
∙ 1x Front sprocket…

Seal set Puch MV/VS 2/3 gear foot shift (6 Pieces)

∙ Seal set.
∙ 6 Pieces.
∙ For 2 and 3 gear foot shift engines.

Set consists of:

∙ 2X Crankshaft seal (17x35x7)
∙ 2x Crank axle seal (16x24x7)
∙ 1x Front sprocket…

Seal set Taiwan Puch MV/VS 2/3 gear foot shift (6 Pieces)

∙ Seal set.
∙ 6 Pieces.
∙ For 2 and 3 gear foot shift engines.
∙ Taiwan.

Set consists of:

∙ 2X Crankshaft seal (17x35x7)
∙ 2x Crank axle seal (16x24x7)
∙…

Bearing and seal set Puch 2 gear hand shift (8 Pieces)

∙ Bearing and seal set.
∙ 8 Pieces.
∙ Complete bearing and seal set for a Puch 2 gear hand shift engine.

Set consists of:

∙ 2X L17 Ball bearing (A-Qaulity NSK)
∙…

Bearing and seal set Puch 2 gear foot shift (9 Pieces)

∙ Bearing and seal set.
∙ 9 Pieces.
∙ Complete bearing and seal set for a Puch 2 gear foot shift engine.

Set consists of:

∙ 2X L17 Ball bearing (A-Qaulity NSK)
∙…

Bearing and seal set Puch 3 gear hand shift (9 Pieces)

∙ Bearing and seal set.
∙ 9 Pieces.
∙ Complete bearing and seal set for a Puch 3 gear hand shift engine.

Set consists of:

∙ 2X L17 Ball bearing (A-Qaulity NSK)
∙…

Bearing and seal set Puch 3 gear foot shift (10 Pieces)

∙ Bearing and seal set.
∙ 10 Pieces.
∙ Complete bearing and seal set for a Puch 3 gear foot shift engine.

Set consists of:

∙ 2X L17 Ball bearing (A-Qaulity…

Bearing set Puch 2 gear hand and foot shift (3 Pieces)

∙ Bearing set.
∙ 3 Pieces.
∙ Complete bearing set for a Puch 2 gear hand and foot shift engine.

Set consists of:

∙ 2X L17 Ball bearing (A-Qaulity NSK)
∙ 1x 6202…

Bearing set Puch 3 gear hand and foot shift (4 Pieces)

∙ Bearing set.
∙ 4 Pieces.
∙ Complete bearing set for a Puch 3 gear hand and foot shift engine.

Set consists of:

∙ 2X L17 Ball bearing (A-Qaulity NSK)
∙ 2x 6202…

Bearing set Puch Monza 4 gear foot shift (4 Pieces)

∙ Bearing set.
∙ 4 pieces.
∙ Complete bearing set for a Puch 4 gear foot shift engine.

Set consists of:

∙ 2X L17 Ball bearing (A-Qaulity NSK)
∙ 2x 6202 Ball bearing…

Crankshaft bearing BO17 NSK Puch DS50R/DS60R/MC50/VZ50R/VS50R∙ Crankshaft bearing BO17.
∙ A Piece.
∙ NSK.

Suitable for:​

∙ Puch DS50R.
∙ Puch DS60R.
∙ Puch MC50.
∙ Puch VZ50R.
∙ Puch VS50R.

Barrel bearing set 28 x 19.4 x 7.5mm Puch 2 / 3 / 4 Gear

∙ Barrel bearing set.
∙ 3-Pieces.

Complete set with:

∙ 1x Outer ring 28 x 19.4 x 7.5mm.
∙ 1x Bearing ring 27.8 x 16 x 1mm.
∙ 14x Barrel bearing 3.5 x…

Barrel Bearing 3.5 x 7.5mm (50 Pieces) Puch 2 / 3 / 4 Gear

∙ Needlbearing
∙ Measurements: 3,5mm x 7,5mm.
∙ 50 Pieces.

Suitable for:

2, 3 and 4 Gear engines.

∙ Puch MS50.
∙ Puch MS50L.
∙ Puch MS50V.
∙ Puch…

Barrel bearing 3.5 x 7.5mm (A Piece) Puch 2 / 3 / 4 Gear

∙ Needlebearing.
∙ Measurements: 3,5mm x 7,5mm.
∙ A Piece.

Suitable for:

2, 3 and 4 Gear engines.

∙ Puch MS50.
∙ Puch MS50L.
∙ Puch MS50V.
∙ Puch VS50.
∙…

Bushing Roller bearing 32 x 23.8 x 7.5mm Puch 2 / 3 / 4 Gear

∙ Bushing roller / needlebearing.
∙ Measurements: 32 x 23.8 x 7.5mm.

Suitable for:

2, 3 and 4 Gear engines.

∙ Puch MS50.
∙ Puch MS50L.
∙ Puch MS50V.
∙…

Bushing Roller bearing 28 x 19.4 x 7.5mm Puch 2 / 3 / 4 Gear

∙ Bushing roller / needlebearing.
∙ Measurements: 28 x 19.4 x 7.5mm.

Suitable for:

2, 3 and 4 Gear engines.

∙ Puch MS50.
∙ Puch MS50L.
∙ Puch MS50V.
∙…