Inner cable Gear / Transmission cable Round Model Nipple Universal / Tomos / Puch

∙ Innercable.
∙ To use for gear / transmission cable.
∙ Round model nipple.

Measurements:

∙ Length: 2 meter.
∙ Diameter: 1.5mm.
∙…

Cable Repair set Complete Puch Maxi

∙ Cable repair kit.
∙ Ideaal for on the go!
∙ To use for throttle, clutch or brake cable.

Complete set with:

∙ 1x Inner cable throttle (Length: 200cm Thickness:1.0mm)
∙ 1x Inner…

Counter drive VDO Metal with Grease nipple 12mm M10 Puch Maxi

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Maxi wheel, which is connected to the speedometer with a…

Counter drive VDO Plastic Black 12mm M10 Puch Maxi

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Maxi wheel, which is connected to the odometer with a speedometer…

Counter drive VDO Metal with Grease nipple 10mm M10 Half hub Puch MS50 / MS50L / MS50V

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch MS wheel, which is connected to the…

Counter drive VDO Metal 12mm M10 Puch Rough Rider / Magnum X

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Magnum X wheel, which is connected to the odometer with a…

Counter drive Metal 11mm as Original Puch Maxi P1

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Maxi P1 wheel, which is connected to the odometer with a speedometer…

Mounting plate for Shift cable 2 Gears Tomos / Puch

∙ Mountingplate / Baseplate.
∙ Mounting plate for the 2 catch brackets of the shift cable's at the bottom of the engine.
∙ Bare plate, without catch brackets.

Suitable…

Mounting plate for Shift cable 3 Gears Tomos / Puch

∙ Mountingplate / Baseplate.
∙ Mounting plate for the 2 catch brackets of the shift cable's at the bottom of the engine.
∙ Bare plate, without catch brackets.

Suitable…

Bracket brake cable Rear side Puch MV / MS / MSV

∙ Bracket for rear brake cable
∙ For models with footrests.

Suitable for:

∙ Puch MV
∙ Puch MS.
∙ Puch MSV.

Identical to Puch article number:

363.1.25.005.2.

Holder Brake cable Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Brake cable holder (Catch bracket)
∙ Keeps the rear brake cable in place.
∙ Is mounted behind the M8 Shock absorber bolt.

Suitable for:

∙ Puch MV.
∙ Puch…

Choke Holder on Handlebar Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Choke cable clamp bracket / holder.
∙ Mounting on Handlebar.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Tomos 2L.
∙ Tomos 3L.
∙…

Handle set shift lever repair kit (Puch 2/3 gear)

∙ Handle set left shift lever repair kit.
∙ For Puch 2 ans 3 gear engines.

Suitable for:

∙ Puch.
∙ Tomos.
∙ Kreidler.

Cable lubricator universal

∙ Cable lubricator.
∙ For universal use.
∙ Max diameter outer cable:10mm.
∙ Cable is clamped. and grease can be sprayed in with a spray can.

Cable greaser (Black)

∙ Black.
∙ A piece.
∙ Cut a little part of the outer cable and put te cable greaser on.

Cable greaser (Gray)

∙ Gray.
∙ A piece.
∙ Cut a little part of the outer cable and put te cable greaser on.

Hollow tooth rear brake pedal Puch DS50

∙ Holllow tooth / catch nipple / cablenipple.
∙ Required for cable attachment of the rear brake cable to the foot brake pedal.
∙ A Piece.

Suitable for:

∙ Puch DS50.

Identical to…

Cable anti fray nipple

∙ A piece.
∙ Aluminium.

Cable cap 4.0mm Universal

∙ Cablecap / end piece / Bush.
∙ Finishing bush for the end of the outer cable.
∙ Inner diameter: 4mm.
∙ A Piece.

Suitable for:

∙ Universal to use on various moped models.

Cable cap 4.5mm Universal

∙ Cablecap / end piece / Bush.
∙ Finishing bush for the end of the outer cable.
∙ Inner diameter: 4.5mm.
∙ A Piece.

Suitable for:

∙ Universal to use on various moped models.

Cable cap 5.0mm Universal

∙ Cablecap / end piece / Bush.
∙ Finishing bush for the end of the outer cable.
∙ Inner diameter: 5mm.
∙ A Piece.

Suitable for:

∙ Universal to use on various moped models.

Cable cap 5.5mm Universal

∙ Cablecap / end piece / Bush.
∙ Finishing bush for the end of the outer cable.
∙ Inner diameter: 5.5mm.
∙ A Piece.

Suitable for:

∙ Universal to use on various moped models.

Cable cap 6.0mm with Adapter Universal

∙ Cablecap / end piece / Bush.
∙ Model with centering spout.
∙ Finishing bush for the end of the outer cable.
∙ Inner diameter: 6mm.
∙ A Piece.

Suitable for:

∙ Universal to use…

Hollow tooth with Slot (Hook in) 8mm x 15mm Brake / Clutch Lever Magura Universal

∙ Hollow tooth / catch nipple / cablenipple.
∙ Model with slot at the top (Hook in)
∙ Required for the cable attachment of Magura model brake…

Hollow tooth with Slot (Hook in) 8mm x 12mm Brake / Clutch Lever Universal

∙ Hollow tooth / catch nipple / cablenipple.
∙ Model with slot at the top (Hook in)
∙ Required for the cable attachment of brake and clutch…

Hollow tooth with Slot (Hook in) 10mm x 10mm Brake / Clutch Lever Lusito Universal

∙ Hollow tooth / catch nipple / cablenipple.
∙ Model with slot at the top (Hook in)
∙ Required for the cable attachment of Lusito model…

Hollow tooth with Slot 9.5mm x 9.5mm Brake / Clutch Lever Universal

∙ Hollow tooth / catch nipple / cablenipple.
∙ Model with slot at the top.
∙ Required for the cable attachment of brake and clutch levers.
∙ A…

Hollow tooth with Slot 8mm x 9mm Brake / Clutch Lever Lusito Universal

∙ Hollow tooth / catch nipple / cablenipple.
∙ Model with slot at the top.
∙ Required for the cable attachment of Lusito model brake and clutch…

Hollow tooth without Slot 8mm x 9mm Brake / Clutch Lever Lusito Universal

∙ Hollow tooth / catch nipple / cablenipple.
∙ Model without slot.
∙ Required for the cable attachment of Lusito model brake and clutch levers.
∙ A…

Hollow tooth with Slot (Hook in) 8mm x 9mm Brake / Clutch Lever Lusito Universal

∙ Hollow tooth / catch nipple / cablenipple.
∙ Model with slot at the top (Hook in)
∙ Required for the cable attachment of Lusito model brake…

Cable adjusting Bolt Brake handle Short 32mm Puch

∙ Adjustingbolt Cable / Brakehandle.
∙ Plug-in Model.
∙ Short Model (32mm Length)
∙ A Piece.

Suitable for:

∙ Puch Models.
∙ Zündapp Models.

Cable adjusting Bolt Brake handle Long 46mm Puch

∙ Adjustingbolt Cable / Brakehandle.
∙ Plug-in Model.
∙ Long Model (46mm Length)
∙ A Piece.

Suitable for:

∙ Puch Models.
∙ Zündapp Models.

Cable adjusting Bolt with Slot M10 x 35mm Universal

∙ Adjustingbolt cable.
∙ Model with Slot.
∙ Aluminium.
∙ M10 x 35mm Model.

Measurements:

∙ Length: 35mm.
∙ Screw thread: M10.
∙ Length screw thread: 22m.
∙…

Cable adjusting Bolt with Slot M8 x 15mm Universal

∙ Adjustingbolt cable.
∙ Model with Slot.
∙ M8 x 15mm Model.

Measurements:

∙ Length: 15mm.
∙ Screw thread: M8.
∙ Diameter adjusting wheel: 18mm.

Suitable for:

∙…

Cable adjusting Bolt with Slot M8 x 20mm Universal

∙ Adjustingbolt cable.
∙ Model with Slot.
∙ M8 x 20mm Model.

Measurements:

∙ Length: 20mm.
∙ Screw thread: M8.
∙ Diameter adjusting wheel: 18mm.

Suitable for:

∙…

Cable adjusting Bolt with Slot M6 x 25mm Universal

∙ Adjustingbolt cable.
∙ Model with Slot.
∙ M6 x 25mm Model.

Measurements:

∙ Length: 25mm.
∙ Screw thread: M6.
∙ Diameter adjusting wheel: 18mm.

Suitable for:

∙…

Cable adjusting Bolt with Slot M6 x 42mm Universal

∙ Adjustingbolt cable.
∙ Model with Slot.
∙ M6 x 42mm Model.

Measurements:

∙ Length: 42mm.
∙ Screw thread: M6.
∙ Diameter adjusting wheel: 18mm.

Suitable for:

∙…

Cable adjusting Bolt with Slot M7 x 25mm Universal

∙ Adjustingbolt cable.
∙ Model with Slot.
∙ M7 x 25mm Model.

Measurements:

∙ Length: 25mm.
∙ Screw thread: M7.
∙ Diameter adjusting wheel: 18mm.

Suitable for:

∙…

Cable adjusting Bolt with Slot M7 x 45mm Universal

∙ Adjustingbolt cable.
∙ Model with Slot.
∙ M7 x 45mm Model.

Measurements:

∙ Length: 45mm.
∙ Screw thread: M7.
∙ Diameter adjusting wheel: 18mm.

Suitable for:

∙…

Cable adjusting Bolt with Slot M8 x 45mm Universal

∙ Adjustingbolt cable.
∙ Model with Slot.
∙ M8 x 45mm Model.

Measurements:

∙ Length: 45mm.
∙ Screw thread: M8.
∙ Diameter adjusting wheel: 18mm.

Suitable for:

∙…

Cable adjusting Bolt M7 x 25mm Universal

∙ Adjustingbolt cable.
∙ Model without Slot.
∙ M7 x 25mm Model.

Measurements:

∙ Length: 25mm.
∙ Screw thread: M7.
∙ Diameter adjusting wheel: 16mm.

Suitable for:

∙…

Cable adjusting Bolt with Slot M6 x 53mm Universal

∙ Adjustingbolt cable.
∙ Model with Slot.
∙ Long Model.
∙ M6 x 53mm Model.

Measurements:

∙ Length: 53mm.
∙ Screw thread: M6.

Suitable for:

∙ Universal to use on…

Cable adjusting Bolt M6 x 40mm Puch Maxi / Universal

∙ Adjustingbolt cable.
∙ Model without Slot.
∙ M6 x 40mm Model.
∙ For Puch Maxi brake cable frontside and rearside.

Measurements:

∙ Length: 40mm.
∙ Screw thread:…

Cable adjusting Bolt M6 x 35mm Universal

∙ Adjustingbolt cable.
∙ Model without Slot.
∙ M6 x 35mm Model.

Measurements:

∙ Length: 35mm.
∙ Screw thread: M6.

Suitable for:

∙ Universal to use on various moped…

Cable adjusting Bolt M5 x 35mm Universal

∙ Adjustingbolt cable.
∙ Model without Slot.
∙ M5 x 35mm Model.

Measurements:

∙ Length: 35mm.
∙ Screw thread: M5.
∙ Length screw thread: 23mm.

Suitable for:

∙ Universal…

Cable adjusting Bolt M5 x 31mm Universal

∙ Adjustingbolt cable.
∙ Model without Slot.
∙ M5 x 31mm Model.

Measurements:

∙ Length: 31mm.
∙ Screw thread: M5.
∙ Length screw thread: 20mm.

Suitable for:

∙ Universal…

Screw Nipple Hexagon Throttle cable 5mm x 7mm Universal

∙ Nipple throttlecable.
∙ Screw hexagon Model.
∙ 5mm x 7mm Model.

Measurements:

∙ Length: 7mm.
∙ Diameter: 5mm.

Suitable for:

∙ Universal to use on various moped models.

Screw Nipple Allen Throttle cable 5mm x 7mm Universal

∙ Nipple throttlecable.
∙ Screw allen Model.
∙ 5mm x 7mm Model.

Measurements:

∙ Length: 7mm.
∙ Diameter: 5mm.

Suitable for:

∙ Universal to use on various moped models.

Screw Nipple Allen Throttle cable 5mm x 10mm Universal

∙ Nipple throttlecable.
∙ Screw allen Model.
∙ 5mm x 10mm Model.

Measurements:

∙ Length: 10mm.
∙ Diameter: 5mm.

Suitable for:

∙ Universal to use on various moped models.

Screw Nipple Hexagon 6mm x 9mm Universal

∙ Nipple.
∙ Screw hexagon Model.
∙ 6mm x 9mm Model.

Measurements:

∙ Length: 9mm.
∙ Diameter: 6mm.

Suitable for:

∙ Universal to use on various moped models.

Screw Nipple Hexagon 7mm x 9mm Universal

∙ Nipple.
∙ Screw hexagon Model.
∙ 7mm x 9mm Model.

Measurements:

∙ Length: 9mm.
∙ Diameter: 7mm.

Suitable for:

∙ Universal to use on various moped models.

Screw Nipple Hexagon 8mm x 9mm Universal

∙ Nipple.
∙ Screw hexagon Model.
∙ 8mm x 9mm Model.

Measurements:

∙ Length: 9mm.
∙ Diameter: 8mm.

Suitable for:

∙ Universal to use on various moped models.

Screw Nipple Hexagon 8mm x 12mm Universal

∙ Nipple.
∙ Screw hexagon Model.
∙ 8mm x 12mm Model.

Measurements:

∙ Length: 12mm.
∙ Diameter: 8mm.

Suitable for:

∙ Universal to use on various moped models.

Screw Nipple Hexagon 6mm x 14mm Universal

∙ Nipple.
∙ Screw hexagon Model.
∙ 6mm x 14mm Model.

Measurements:

∙ Length: 14mm.
∙ Diameter: 6mm.

Suitable for:

∙ Universal to use on various moped models.

Screw Nipple Hexagon 8mm x 15mm Universal

∙ Nipple.
∙ Screw hexagon Model.
∙ 8mm x 15mm Model.

Measurements:

∙ Length: 15mm.
∙ Diameter: 8mm.

Suitable for:

∙ Universal to use on various moped models.

Screw Nipple Angled Hexagon 7mm x 7mm Universal

∙ Nipple.
∙ Angled / Screw hexagon Model.
∙ To use for the mounting of various shift / clutch cable's.
∙ 7mm x 7mm Model.

Measurements:

∙ Length: 7mm.
∙ Diameter:…

Screw Nipple Angled Allen 7mm x 7mm Universal

∙ Nipple.
∙ Angled / Screw allen Model.
∙ To use for the mounting of various shift / clutch cable's.
∙ 7mm x 7mm Model.

Measurements:

∙ Length: 7mm.
∙ Diameter:…

Solder Nipple 5mm x 5mm Throttle cable Universal

∙ Soldernipple.
∙ For throttlecable.

Measurements:

∙ Diameter: 5mm.
∙ Length: 5mm.
∙ Bore: 1.8mm.

Suitable for:

∙ Universal to use on various moped models.

Solder Nipple 6mm / 3.5mm x 9mm Pear Model Universal

∙ Soldernipple.
∙ Pear Model.

Measurements:

∙ Diameter head: 6mm.
∙ Diameter: 3.5mm.
∙ Length: 9mm.
∙ Bore: 1.8mm.

Suitable for:

∙ Universal to use on various moped models.

Odometer cable reducer 2.5mm (Huret-VDO)

∙ Brass slide-on to use a VDO counter cable in combination with a counter clock with wide inner cable connection (Such as Huret)
∙ Inside size:1.8mm.
∙ Outer size:2.5mm.

Cable protection tape 19mm 25 meter

∙ Cable protection tape.
∙ Self adhesive.
∙ HPX.
∙ Black.
∙ Heatresistent till 105°C Degrees.
∙ 19mm wide.
∙ 25 meter length.

Cable tie rubber universal

∙ Cable tie rubber.
∙ To organize cables by connecting them together.
∙ Universal to use.

Cable clamp Plastic 12mm Universal

∙ Cableclamp.
∙ Plastic.
∙ 12mm.
∙ A Piece.

Suitable for:

∙ Universal to use on various moped models.

Cable clamp Plastic 10mm Universal

∙ Cableclamp.
∙ Plastic.
∙ 10mm.
∙ A Piece.

Suitable for:

∙ Universal to use on various moped models.

Hose clamp Metal - Rubber 12mm Universal

∙ Hoseclamp.
∙ Metal - Rubber.
∙ 12mm.
∙ A Piece.

Suitable for:

∙ Universal to use on various moped models.

Hose clamp Metal - Rubber 10mm Universal

∙ Hoseclamp.
∙ Metal - Rubber.
∙ 10mm.
∙ A Piece.

Suitable for:

∙ Universal to use on various moped models.

Hose clamp Metal - Rubber 8mm Universal

∙ Hoseclamp.
∙ Metal - Rubber.
∙ 8mm.
∙ A Piece.

Suitable for:

∙ Universal to use on various moped models.

Cable guide universal

∙ Cable guide.
∙ To organize cables by connecting them together.
∙ Universal to use.
∙ Hole:7mm.

Cable connector silver (8mm)

∙ Cable connector.
∙ Silver/Aluminium.
∙ For 8mm cables.
∙ A Piece.

Choke set chrome universal Polini

∙ Choke set.
∙ To use as hand choke.
∙ Chrome.
∙ Universal.
∙ Original Polini article number:316.0021.

Choke set blue universal Polini

∙ Choke set.
∙ To use as hand choke.
∙ Blue.
∙ Universal.
∙ Original Polini article number:316.0022.

Cover Outer cable Black 6mm 1.5 Meter Universal

∙ Outer cable cover / Cable sock.
∙ Black.

Measurements:

∙ Total length: 150cm.
∙ Inner diameter: 6mm.

Suitable for:

∙ Puch Models.
∙ Universal to use on various moped models.

Cover Outer cable Chrome 6mm 1.5 Meter Universal

∙ Outer cable cover / Cable sock.
∙ Chrome.

Measurements:

∙ Total length: 150cm.
∙ Inner diameter: 6mm.

Suitable for:

∙ Puch Models.
∙ Universal to use on various moped models.

Cover Outer cable Neon Red 6mm 2 Meter Universal

∙ Outer cable cover / Cable sock.
∙ Neon Red.

Measurements:

∙ Total length: 200cm.
∙ Inner diameter: 6mm.

Suitable for:

∙ Puch Models.
∙ Universal to use on various…

Cover Outer cable Black / Yellow 6mm 2 Meter Universal

∙ Outer cable cover / Cable sock.
∙ Black / Yellow.

Measurements:

∙ Total length: 200cm.
∙ Inner diameter: 6mm.

Suitable for:

∙ Puch Models.
∙ Universal to…

Cover Outer cable White / Green 6mm 2 Meter Universal

∙ Outer cable cover / Cable sock.
∙ White / Green.

Measurements:

∙ Total length: 200cm.
∙ Inner diameter: 6mm.

Suitable for:

∙ Puch Models.
∙ Universal to use…

Cover Outer cable Black / Green 6mm 2 Meter Universal

∙ Outer cable cover / Cable sock.
∙ Black / Green.

Measurements:

∙ Total length: 200cm.
∙ Inner diameter: 6mm.

Suitable for:

∙ Puch Models.
∙ Universal to use…

Cover Outer cable White / Pink 6mm 2 Meter Universal

∙ Outer cable cover / Cable sock.
∙ White / Pink.

Measurements:

∙ Total length: 200cm.
∙ Inner diameter: 6mm.

Suitable for:

∙ Puch Models.
∙ Universal to use on…