Wheel Axle Frontside 11mm - 155mm Spokewheels Ball bearing Complete A-Qaulity! Puch Maxi

∙ Frontwheel axle.
∙ Complete.
∙ Suitable for spokewheels with separate cups.
∙ A-Qaulity!
∙ Better threaded then other imitation…

Wheel Axle Rearside 12mm - 175mm Spokewheels Ball bearing Complete A-Qaulity! Puch Maxi

∙ Rearwheel axle.
∙ Complete.
∙ Suitable for spokewheels with separate cups.
∙ A-Qaulity!
∙ Better threaded then other imitation…

Wheel Axle Frontside 11mm - 155mm Spokewheel Ball Bearing Complete Puch Maxi

∙ Frontwheel axle.
∙ Complete.
∙ Suitable for spokewheels with separate cups.
∙ Bare steel, may have some superficial rust.
∙ Screw thread not…

Wheel Axle Rearside 12mm - 210mm Spokewheel Ball bearing Complete Puch Maxi

∙ Rearwheel axle.
∙ Complete.
∙ Suitable for spokewheels with separate cups.

Complete set with:

∙ Ascones.
∙ Wide nuts.
∙ Small nuts.
∙…

Wheel Axle Rearside 12mm - 210mm Spokewheel Ball bearing Complete Puch Maxi

∙ Rearwheel axle.
∙ Complete.
∙ Suitable for spokewheels with separate cups.

Complete set with:

∙ Ascones.
∙ Wide nuts.
∙ Small nuts.
∙…

Wheel Axle Frontside Tomos 2L / 3L / Puch MV / MS / VS / DS / Etc

∙ Frontwheel axle.

Measurements:

∙ Diameter: -
∙ Length: 165mm

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Puch DS.
∙ Puch VZ.
∙ Tomos…

Wheel Axle Rearside 10mm x 190mm - 176mm Tomos 2L / 3L / Puch MV / MS / VS / DS / Etc

∙ Rearwheel axle.

Measurements:

∙ Diameter: 9.9mm.
∙ Length: 176mm - 190mm.
∙ Thickness axle head: 17mm.
∙ Screw thread: M10 x…

Wheel Axle Frontside 12mm - 190mm Puch Z-One / Manet / Korado

∙ Frontwheel axle.
∙ Complete with ring and nut!

Measurements:

∙ Total length: 190mm.
∙ Length 12mm part: 182mm.
∙ Diameter: 12mm.
∙ Screw thread: M12 x…

Wheel Axle Frontside 12mm - 180mm Puch Monza / Grand Prix

∙ Frontwheel axle.

Measurements:

∙ Diameter: 12mm.
∙ Diameter thickening: 16mm.
∙ Lengte thickening: 42mm.
∙ Total length: 180mm

Suitable for:

∙ Puch…

Wheel Axle Rearside 12mm - 250mm Puch Monza

∙ Rearwheel axle.
∙ Complete with ring and nut.

Measurements:

∙ Diameter: 12mm.
∙ Total length: 250mm - 210mm.

Suitable for:

∙ Puch Monza.

Wheel Axle Rearside M10 x 1mm - 205mm Puch DS50

∙ Rearwheel axle.

Measurements:

∙ Diameter: 10mm.
∙ Total length: 205mm - 192mm.
∙ Screw thread: M10 x 1mm.

Suitable for:

∙ Puch DS50.
∙ Puch DS50R.
∙ Puch…

Wheel Axle Rearside 12mm - 238mm Tomos 4L / Puch VZ50

∙ Rearwheel axle / thru axle.
∙ Complete with nut.

Measurements:

∙ Diameter: 12mm.
∙ Total length: 238mm - 225mm.

Suitable for:

∙ Tomos 4L (Older Models)
∙ Puch VZ50.

Wheel Axle Frontside 182mm - M10 x 1mm ZKW Hub Puch VZ / M50 / M50R

∙ Frontwheel axle.
∙ Thru axle.
∙ M10 x 1mm.
∙ Length: 182mm.
∙ For ZKW hub.

Suitable for:

∙ Puch VZ.
∙ Puch M50.
∙ Puch M50R.

Wheel Axle Frontside Complete Puch VZ50

∙ Frontwheel axle.
∙ Complete with ring & nut.

Suitable for:

∙ Puch VZ50.

Wheel Axle Rearside Complete M10 x 175mm Puch MV50

∙ Rearwheel axle.
∙ Complete with nut and ring.
∙ M10 x 175mm.

Suitable for:

∙ Puch MV50.

Wheel Axle Rearside Complete 10mm - 204mm Puch DS50

∙ Rearwheel axle.
∙ Complete with nut & rings.

Measurements:

∙ Length: 204mm.
∙ Thickness: 10mm.

Suitable for:

∙ Puch DS50.

Original Puch article…

Wheel Axle set Frontside Tomos 2L / 3L / Puch MV / MS / VS / DS / Etc

∙ Frontwheel axle set.
∙ Complete with nut & ring.

Measurements:

∙ Diameter: -
∙ Length: 165mm

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch…

Wheel Axle Rearside 239m - M12 x 1mm Puch VZ / MC50

∙ Rearwheel axle.
∙ M12 x 1mm.
∙ Length with head: 239mm.

Suitable for:

∙ Puch VZ.
∙ Puch MC50.

Wheel Axle Rearside 12mm Puch XL / SL / 4S

∙ Rearwheel axle.
∙ Thru axle.

Measurements:

∙ Length: 246mm.
∙ Diameter: 12mm.
∙ Screw thread: M12 x 1mm.

Suitable for:

∙ Puch XL.
∙ Puch SL.
∙ Puch 4S.

Original…

Wheel Axle Complete M12 x 190mm Frontfork Honda MB / MT

∙ Frontwheel axle.
∙ Complete.
∙ Remake.

Measurements:

∙ Length: 190mm.
∙ Diameter: 12mm.
∙ Screw thread: 1.25.

Complete set with:

∙ Wheel axle.
∙…

Axle Swingarm VDMRacing 12mm - 208mm Universal

∙ Axle Swingarm.
∙ Complete with self retaining nut and rings.

Measurements:

∙ Length with head: 208mm
∙ Length without head: 198mm.
∙ Screw thread: M12 x…

Hollow axle M15 x 1.25 Puch M50 / M50 Racing

∙ Hollow axle / Chain sprocket shaft.
∙ For the gear housing of Puch M50 with Puch rear hub.
∙ Not suitable for ZKW-Hub of the first models.
∙ M15 x 1.25

Suitable for:

∙…

Repair set Rearwheel Hub 7-Pieces Puch Monza

∙ Repairset.
∙ For the Rear wheelhub.

Complete set with:

∙ 2x Rear wheel bearings.
∙ 1x Driver ring.
∙ 3x Rear wheel bushings.
∙ 1x Spacer.

Suitable for:

∙ Puch Monza.

Repair set Frontwheel Hub 5-Pieces Puch Monza

∙ Repairset.
∙ For the Front wheelhub.

Complete set with:

∙ 2x Front wheel bearings.
∙ 1x Driver ring.
∙ 1x Front wheel bushings.
∙ 1x Spacer.

Suitable for:

∙ Puch Monza.

Repair set Rearwheel Puch DS50

∙ Wheelhub repairset.
∙ Suitable for the Rear wheel.
∙ Complete with bearings, seals, spacers, circlips etc.

Suitable for:

∙ Puch DS50.

Repair set Frontwheel Puch Tomos 2L / 3L Puch MV / VS / MS / Etc

∙ Wheelhub repairset.
∙ Suitable for the Front wheel.
∙ Complete with bearings, seals, spacers, circlips etc.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙…

Repair set Rearwheel Puch Tomos 2L / 3L Puch MV / VS / MS / Etc

∙ Wheelhub repairset.
∙ Suitable for the Rear wheel.
∙ Complete with bearings, seals, spacers, circlips etc.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch…

Washer Wheel Axle 12mm Galvanized Puch

∙ Washer wheelaxle.
∙ For 12mm wheel axle.
∙ Steel.
∙ Galvanized.
∙ DIN 125A.
∙ A Piece.

Measurements:

∙ Outer diameter: 24mm.
∙ Inner diameter: 13mm.
∙ Thickness:…

Ascone 12mm Spokewheel Ball bearing Puch Maxi

∙ Ascone nut.
∙ Suitable for spokewheels with separate cups.
∙ A Piece.

Suitable for:

∙ Puch Maxi Models.

Ascone 11mm Spokewheel Ball bearing Puch Maxi

∙ Ascone nut.
∙ Suitable for spokewheels with separate cups.
∙ A Piece.

Suitable for:

∙ Puch Maxi Models.

Wheel Bearing Conversion to Fixed bearings! Frontside / Rearside Puch Maxi

∙ Wheelbearing.
∙ For star rim and spoke wheel hubs with inner diameter of 29mm.
∙ To convert your original hub with loose balls to fixed…

Wheel Bearing Frontside / Rearside 6001 2RS SKF A-Qaulity! Puch Maxi

∙ Wheelbearing.
∙ Suitable for spokewheels & starwheels with fixed bearings.
∙ 6001 2RS SKF, A-Qaulity!
∙ A Piece.

Measurements:

∙ Inner diameter:…

Wheel Bearing Frontside / Rearside 6001 2RS Puch Maxi

∙ Wheelbearing.
∙ Suitable for spokewheels & starwheels with fixed bearings.
∙ 6001 2RS.
∙ A Piece.

Measurements:

∙ Inner diameter: 12mm.
∙ Outer diameter:…

Wheel Bearing 6002 2RSH Koyo A-Qaulity! Tomos 2L / 3L / Puch MV / VS / DS / VZ / MC

∙ Wheelbearing.
∙ 6002 2RSH Koyo A-Qaulity!
∙ A Piece.

Measurements:

∙ Inner diameter: 15mm.
∙ Outer diameter: 32mm.
∙ Width:…

Wheel Bearing 6002 Tomos 2L / 3L / Puch MV / VS / DS / VZ / MC

∙ Wheelbearing.
∙ 6002 Bearing.
∙ A Piece.

Measurements:

∙ Inner diameter: 15mm.
∙ Outer diameter: 32mm.
∙ Width: 9mm.

Suitable for:

∙ Puch MV50…

Counter drive VDO Metal with Grease nipple 10mm M10 Half hub Puch MS50 / MS50L / MS50V

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch MS wheel, which is connected to the…

Counter drive VDO Metal with Grease nipple 12mm M10 Puch Maxi

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Maxi wheel, which is connected to the speedometer with a…

Counter drive VDO Metal 12mm M10 Puch Z-One / Manet / Korado

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Magnum X wheel, which is connected to the speedometer with a…

Counter drive VDO Plastic 12mm M10 Original! Puch Maxi

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Maxi wheel, which is connected to the speedometer with a speedometer…

Counter drive VDO Plastic Black 12mm M10 Puch Maxi

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Maxi wheel, which is connected to the odometer with a speedometer…

Counter drive VDO Metal 12mm M10 Puch Rough Rider / Magnum X

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Magnum X wheel, which is connected to the odometer with a…

Counter drive VDO Plastic Black 12mm M10 Puch Monza

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Monza wheel, which is connected to the odometer with a speedometer…

Counter drive Metal 11mm as Original Puch Maxi P1

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Maxi P1 wheel, which is connected to the odometer with a speedometer…

Counter drive Wheel 17 Teeth Puch DS50 / Alabama / Mexico / Etc

∙ Counterdrive Worm wheel.
∙ 17 Teeth.
∙ Suitable for models with 12 Inch wheels.

Suitable for:

∙ Puch DS50.
∙ Puch DS50-4.
∙ Puch DS50V.
∙ Puch…

Counter drive Wheel 22 Teeth Puch MV50 / VS50 / MS50V / MC50 / VZ50

∙ Counterdrive worm wheel.
∙ 22 Teeth.
∙ Inner diameter: 28.5mm.

Suitable for:

∙ Puch MV50.
∙ Puch VS50 (New Models)
∙ Puch MS50V (Models with Full…

Counter drive Wheel ZKW Hub Old Model Puch M50

∙ Counterdrive worm wheel.
∙ For ZKW hub.

Suitable for:

∙ Puch M50 (Old Models)
∙ KTM Models.

Identical to Puch article number

328.1.40.060.1 , P3403

Counter drive Worm ZKW Hub Old Model Puch M50

∙ Counterdrive worm wheel.
∙ For ZKW hub.

Suitable for:

∙ Puch M50 (Old Models)
∙ KTM Models.

Identical to Puch article number

328.1.40.061.1 , P3404

Connection Piece Speedometer Cable Tomos 2L / 3L / Puch MV / VS / VZ / DS / Etc

∙ Odometer connection peace for Counter drive.
∙ Aluminium.
∙ VDO Cable connection (M10 x 1mm)
∙ N.O.S, New Old Stock Original Puch…

Worm Axle Counter drive Tomos 2L / 3L / Puch MV / VS / VZ / DS / Etc

∙ Worm axle counter driver.
∙ Steel.
∙ 12 Teeth.

Measurements:

∙ Diameter: 8mm - 13mm.
∙ Totale length: 35mm.

Suitable for:

∙ Puch MS50V (Full…

Drive Axle Counter drive Tomos 2L / 3L / Puch MV / VS / VZ / DS / Etc

∙ Drive axle counter driver.

Measurements:

∙ Diameter: 3.9mm.
∙ Total length: 39mm.

Suitable for:

∙ Puch MS50V (Full hub)
∙ Puch VS50.
∙ Puch…

Transmission Rubber Puch M50Racing

∙ Transmissionrubber / driving rubber.
∙ Diameter 45mm x 108mm x 15mm.

Suitable for:

∙ Puch M50 Racing.

Identical to Puch article number

368.1.41.831 , 000P4034

Transmission Rubber ZKW Hub Puch M50S / M50SE

∙ Transmissionrubber / driving rubber.

Suitable for:

Models with ZKW rear hub

∙ Puch M50S.
∙ Puch M50SE.

Identical to Puch article number

328.1.41.031.1 , P3419

Freewheel Sprocket Esjot A-Qaulity! Puch Maxi

∙ Freewheel sprocket.
∙ Diamond cut sprocket.
∙ 23 Teeth.
∙ 1/2" x 1/8". French screw thread M34.7 x 1mm.
∙ Esjot, A-Qaulity!

Suitable for:

∙ Puch Maxi Models.

Freewheel Sprocket Puch Maxi

∙ Freewheel sprocket.
∙ 23 Teeth.

Suitable for:

∙ Puch Maxi Models.

Wheel Transformer set 17 Inch Grimeca 10-Pieces Black Puch Maxi

∙ Wheel transformers.
∙ 3D Printed.
∙ Black.
∙ Mounting material included
∙ Set for 1 rim (10 Wheel)

Pay attention! Do not overtighten bolts to prevent…

Hollow Axle Front Wheel Tomos 2L / 3L / Puch MV / VS / DS / VZ

∙ Inner / Hollow axle.
∙ Front side.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch VZ.
∙ Tomos 2L.
∙ Tomos 3L.
∙ Etc.

Identical to Puch…

Hollow Axle Rear Wheel Tomos 2L / 3L / Puch MV / VS / DS / VZ

∙ Inner / Hollow axle.
∙ Rear side.
∙ 140mm model.
∙ Reinforced version with thickening in the middle.
∙ Model with non-sharp cut grooves for the…

Distance Bush 5 Star Alloy Cast Wheel & Spokehweel Rear side Puch Maxi

∙ Distance bush / spacer.
∙ Placed between the bearings in the wheel hub.
∙ Geschikt for 5 Star alloy cast wheels & spokewheels with fixed bearings.
∙…

Distance Bush Spoke Wheel Rear side 39mm Puch Monza / Grand Prix

∙ Distance bush / spacer.
∙ Placed between the bearings in the rear hub.
∙ For spokewheel hub Leleu 120mm.

Measurements:

∙ Inner diameter: 13mm.
∙ Outer…

Distance Bush Right side 5 Star Alloy Cast Wheel Right side Puch Maxi

∙ Distance bush / spacer.
∙ Placed on the right side of the rear wheel in combination with a 5 Star alloy cast wheel.
∙ A Piece.

Measurements:

∙…

Distance Bush Rear Wheel Left side Puch Monza

∙ Distance bush / spacer.
∙ Rear wheel.
∙ Left side.

Measurements:

∙ Outer diameter: 25mm.
∙ Inner diameter: 12mm.
∙ Length: 27mm.

Suitable for:

∙ Puch Monza.

Distance Bush Rear Hub 35.5mm Puch VZ50 / R50 / MC50

∙ Distance bush / spacer.
∙ Rear hub.

Measurements:​

∙ Length: 35.5mm

Suitable for:

∙ Puch VZ50.
∙ Puch R50.
∙ Puch MC50.

Orginal Puch article number

357.2.41.023.2

Distance Bush Front Wheel 39mm Puch Monza / M50 / N50 / Etc

∙ Distance bush / spacer.
∙ Placed between the bearings in the front wheel hub.

Measurements:

∙ Inner diameter: 12mm.
∙ Outer diameter: 16mm.
∙ Length:…

Distance Bush Wheel Axle Front side 37.5mm Half Hub Puch MS50

∙ Distance bush / spacer.
∙ Front axle.

Measurements:

∙ Inner diameter: 10.25mm.
∙ Outer diameter: 16mm.
∙ Length: 37.5mm

Suitable for:

∙ Puch MS50…

Distance Bush Wheel Axle Rear side 80mm Half Hub Puch MS50

∙ Distance bush / spacer.
∙ Rear axle.

Measurements:

∙ Inner diameter: 10.45 / 10.85mm.
∙ Outer diameter: 16mm.
∙ Length: 80mm

Suitable for:

∙ Puch MS50…

Ball Bearing set Wheel Hub 4.76mm 144-Pieces Puch Maxi

∙ Ball bearings.
∙ For wheel bearing with loose cups.
∙ Size: 3/16 / 4.7mm.
∙ 144 Pieces.

Suitable for:

∙ Puch Maxi Models.

Ball Bearing set Wheel Hub 5 Star Alloy Cast Wheel Front side 5.56mm 100-Pieces Puch Maxi

∙ Ball Bearings.
∙ For wheel bearings of a 5 star alloy cast wheel front side.
∙ Size: 7/32 / 5.56mm.
∙ 100 Pieces.

Suitable…

Replacement cover Wheel Hub for Counter driver Speedometer Puch Maxi

∙ Replacement cover / lid.
∙ Replacement cover in place for the counter driver on the wheel.
∙ As original.

Measurements:

∙ Inner diameter axle hole:…

Brake cone Coaster Brake Swiing Puch Maxi

∙ Brake cone.
∙ For coaster brake system.
∙ Swiing, Top-Qaulity!

Suitable for:

∙ Puch Maxi Models.

Cover Ring Wheel Hub Right side Puch MS50 / MS50L / MS50V

∙ Cover ring / Protective ring.
∙ Protective ring for spoke holes.
∙ 1 Ring required per wheel.
∙ Mounting on the right side.

Suitable for:

∙ Puch MS50.
∙…

Grease nipple Screw thread M6 Puch MV50 / VS50 / DS50 /MS50V / Etc

∙ Grease nipple.
∙ Screw thread: M6.
∙ Grease nipple to lubricate the brake wrench & lubricate the swingarm bushings.

Suitable for:

∙ Puch MS50V (Full…

Grease nipple Clamp fit 6mm Puch MV50 / Etc

∙ Grease nipple.
∙ Clamp fit: 6mm.

Suitable for:

∙ Puch MV50.
∙ Etc.

Identical to Puch article number

360.1.40.011.0 , 000P3760

Grease nipple Clamp fit 6mm Plastic Puch MV / VS / DS / VZ / Etc

∙ Grease nipple.
∙ Plastic model.
∙ Clamp fit: 6mm.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch VZ.
∙ Etc.

Identical to Puch article…

Nut Wheel Axle Rear side with Collar & Securing M12 x 1.25mm Honda / Universal

∙ Nut rear wheel axle.
∙ Model with collar & Securing.
∙ Thread: M12 x 1.25mm.
∙ For 12mm wheel axle.
∙ Key width 18mm.

Suitable for:

∙…

Nut Wheel Axle Rear side with Collar M12 x 1.25mm Honda / Universal

∙ Nut rear wheel axle.
∙ Model with collar.
∙ Thread: M12 x 1.25.
∙ For 12mm wheel axle.

Suitable for:

∙ Universal to use on various moped models.

Chain Tensioner Puch M50 Racing

∙ Chain tensioner
∙ A Piece.

Suitable for:

∙ Puch M50 Racing.

Original Puch article number

366.1.41.021.1.

Chain Tensioner Puch Magnum X / Monza / Dakota / VZ50 / Etc

∙ Chain tensioner.
∙ Original model.
∙ A Piece.

Suitable for:

∙ Puch Magnum X.
∙ Puch Rough Rider.
∙ Puch MC50.
∙ Puch Monza.
∙ Puch Dakota.
∙ Puch…

Chain Tensioner M6 Puch Magnum

∙ Chain tensioner.
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Length: 60mm.
∙ Diameter axle hole: 13mm.

SUitable for:

∙ Puch Magnum Models.

Chain Tensioner M6 Original Fitment! Puch Maxi

∙ Chain tensioner.
∙ Original fitment.
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Diameter axle hole: 12mm.

Suitable for:

∙ Puch Maxi Models.

Chain Tensioner M6 Puch Maxi

∙ Chain tensioner.
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Diameter axle hole: 12mm.

Suitable for:

∙ Puch Maxi Models.