Gasket set Cylinder 50cc (38mm) Puch Maxi

Customers also bought

• 
  Cylinder Airsal 50cc (38mm) NM Fast Model Puch Maxi

  Cylinder Airsal 50cc (38mm) NM Fast Model Puch Maxi
  
  ∙ Airsal Cylinder 50cc NM (38mm)
  ∙ Good allround cylinder!
  ∙ Fast model!
  
  Data:
  
  ∙ Cylinder capacity: 50cc.
  ∙ Bore: 38mm.
  ∙ Piston pin: 12mm.
  ∙ NM, New model…

  € 75,⁰⁰

  Order
• 
  Gasket Clutch cover Push-start / Pedal-start Blue Thick! 1mm Puch Maxi e50

  Gasket Clutch cover Push-start / Pedal-start Blue Thick! 1mm Puch Maxi e50
  
  ∙ Clutch cover gasket.
  ∙ Thick Qaulity!
  ∙ Blue.
  ∙ Push-start / Pedal-start engine model.
  ∙ Thickness: 1mm.
  
  Suitable for:
  
  ∙ Puch e50 Push…

  € 3,⁵⁰

  Order
• 
  Gasket set Cylinder 50cc (38mm) Airsal Puch Maxi

  Gasket set Cylinder 50cc (38mm) Airsal Puch Maxi
  
  ∙ Gasketset / Topset cylinder.
  ∙ Suitable for 50cc Airsal cylinder (38mm)
  
  Complete set with:
  
  ∙ 1x Base gasket.
  ∙ 1x Head gasket.
  ∙ 1x Inlet gasket.
  ∙ 1x Exhaust…

  € 2,⁵⁰

  Order
• 
  Gasket Clutch cover Kickstart Blue Thick! 1mm Puch Maxi e50

  Gasket Clutch cover Kickstart Blue Thick! 1mm Puch Maxi e50
  
  ∙ Clutch cover gasket.
  ∙ Thick Qaulity!
  ∙ Blue.
  ∙ Kickstartmotor model.
  ∙ Thickness: 1mm.
  
  Suitable for:
  
  ∙ Puch e50 Kickstart Engines.

  € 3,⁵⁰

  Order
• 
  Gasket set Cylinder 70cc (45mm) Puch Maxi

  Gasket set Cylinder 70cc (45mm) Puch Maxi
  
  ∙ Gasketset / Topset cylinder.
  ∙ Suitable for 70cc cylinder (45mm)
  
  Complete set with:
  
  ∙ 1x Base gasket.
  ∙ 1x Head gasket.
  ∙ 1x Inlet gasket.
  ∙ 1x Exhaust gasket
  
  Suitable…

  € 2,⁷⁵

  Order
• 
  Cylinderhead 70cc (45mm) Old Model Flattened High Pressure Puch Maxi

  Cylinderhead 70cc (45mm) Old Model Flattened High Pressure Puch Maxi
  
  ∙ Cylinderhead.
  ∙ 70cc (45mm) Model.
  ∙ Flattened, High pressure model with small combustion chamber.
  ∙ OM, Old model (Model with small cooling ribs)
  ∙…

  € 19,⁹⁵

  Order
• 
  Revision set 4-Bearing Old Model Puch Maxi e50

  Revision set 4-Bearing Old Model Puch Maxi e50
  
  Complete revision bearing / seal set for Puch e50 Engine with a old model crankshaft.
  
  ∙ 3x NTN Bearing 6203C3.
  ∙ 1x NTN Bearing 6203NR.
  ∙ 2x 17 / 40 / 7 Seal.
  ∙ 1x 22 / 40 /…

  € 32,⁹⁵

  Order
• 
  Airfilter as Origineel Black Complete 10mm - 15mm Bing Carburetor Puch Maxi

  Airfilter as Origineel Black Complete 10mm - 15mm Bing Carburetor Puch Maxi
  
  ∙ Air filter / Airbox.
  ∙ As Original / standard model.
  ∙ Complete with mesh filter.
  ∙ Connection diameter: 20mm.
  ∙ To use in combination with a…

  € 10,⁹⁵

  Order
• 
  Cylinder Mounting set M6 3D Nuts 16-Pieces Puch Maxi

  Cylinder Mounting set M6 3D Nuts 16-Pieces Puch Maxi
  
  ∙ Studs set.
  ∙ M6 / M6 x 115mm.
  ∙ Galvanized.
  ∙ 16 Pieces.
  
  Measurements:
  
  ∙ Total length: 106mm.
  ∙ Screw thread Engine side: M6.
  ∙ Screw thread Cylinderhead…

  € 7,⁵⁰

  Order
• 
  Engine oil change set Puch Maxi (250ml)

  Engine oil change set Puch Maxi (250ml)
  
  ∙ Engine oil change set for Puch Maxi e50 engine.
  
  Complete set with:
  
  ∙ ATF llD engine oil Eurol (250ml)
  ∙ Oil fill bolt.
  ∙ Fiber washer oil fill bolt.
  ∙ Oil drain bolt.
  ∙…

  € 6,⁵⁰

  Order