Clutch bell Push-start / Pedal-start 21 Teeth as Original Puch e50

∙ Clutch bell.
∙ Push-start / Pedal-start model.
∙ Stronger as a original clutch bell.
∙ With Brass bearing bush.
∙ 21 Teeth.

Suitable for:

∙ Puch…

Clutch bell Kickstart engine 21 Teeth as Original Puch e50

∙ Clutch bell.
∙ Kickstart model.
∙ Stronger as a original clutch bell.
∙ With Brass bearing bush.
∙ 21 Teeth.

Suitable for:

∙ Puch Maxi e50 kickstart…

Pressure Plate set Clutch Kickstart Complete Puch e50

∙ Pressure plate set.
∙ Complete set that is mounted on the clutch of a Puch e50 kickstart engine.

Complete set met:

∙ Pressure plate.
∙ Sprocket.
∙ Spring…

Pressure Plate Clutch Kickstart Puch e50

∙ Pressure plate.
∙ This part is mounted on the clutch of a Puch e50 kickstart engine.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Identical to Puch article number

349.1.12.305.1

Sprocket Clutch Kickstart Puch e50

∙ Sprocket.
∙ This part is mounted on the clutch of a Puch e50 kickstart engine.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Nut + Spring washer Clutch Kickstart M10 Puch e50

∙ Nut + Spring washer.
∙ Mounting set to mount the clutch of a Puch e50 kickstart engine.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Nut Clutch Kickstart M10 Puch e50

∙ Nut.
∙ Nut to mount the clutch of a Puch e50 kickstart engine.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Spring washer Clutch Kickstart M10 Puch e50

∙ Spring washer.
∙ Spring washer to mount the clutch of a Puch e50 kickstart engine.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Pressplate Clutch bell Push-start / Pedal-start Original Surflex Complete Puch e50

∙ Clutch bowl / Pressure plate.
∙ Complete with pin.
∙ This part is placed in the clutch bell and is secured with a circlip.
∙ Original…

Pressplate Clutch bell Push-start / Pedal-start as Original Complete Puch e50

∙ Clutch bowl / Pressure plate.
∙ Model as original.
∙ Complete with pin.
∙ This part is placed in the clutch bell and is secured with a…

Pressplate Clutch bell Push-start / Pedal-start Race Complete Puch e50

∙ Clutch bowl / Pressure plate.
∙ Race model (Lighter as original model)
∙ Weight: 107.9 Gram.
∙ Complete with pin.
∙ This part is placed in the…

Pressplate Clutch bell Push-start / Pedal-start as Original Puch e50

∙ Clutch bowl / Pressure plate.
∙ Model as original.
∙ Bare model.
∙ This part is placed in the clutch bell and is secured with a circlip.

Suitable…

Circlip pressplate Clutch bell Push-start / Pedal-start Surflex Puch e50

∙ Circlip.
∙ This part secures the pressure plate / clutch bowl in the clutch bell of a Puch e50 Push-start / Pedal-start engine.
∙ Orginal Puch!
∙…

Pin Pressplate with Bearing Clutch Push-start / Pedal-start Puch e50

∙ Stift.
∙ Complete with bearing.
∙ This part is placed in the pressure plate / clutch bowl of a Puch e50 Push-start / Pedal-start engine.

Suitable…

Axial Bearing pin pressplate Clutch Push-start / Pedal-start Puch e50

∙ Axial bearing.
∙ This part is placed in the pressure stift of a Puch Maxi e50 Push-start / Pedal-start engine.

Suitable for:

∙ Puch Maxi e50…

Circlip pin Pressplate Clutch Push-start / Pedal-start Puch e50

∙ Circlip.
∙ This part secures the pin on the pressure plate / clutch bowl of a Puch e50 Push-start / Pedal-start engine.
∙ A Piece.

Measurements:

∙ Outer…

Nut + Spring Washer Clutch Push-start / Pedal-start M10 Puch e50

∙ Nut + Spring washer.
∙ Mounting set to mount the clutch of a Puch e50 push-start / pedal-start engine.

Suitable for:

∙ Puch Maxi e50 push-start /…

Nut Clutch Push-start / Pedal-start Engine M10 Puch e50

∙ Nut.
∙ Nut to mount the clutch of a Puch e50 Push-start / Pedal-start engine.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start engines.

Spring Washer Clutch Push-start / Pedal-start Engine M10 Puch e50

∙ Spring washer.
∙ Spring washer to mount the clutch of a Puch e50 Push-start / Pedal-start engine.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Push-start /…

Shim Washer Assortiment set 30 Pieces Puch e50

∙ Shim washer assortiment set.
∙ Set for adjusting the clutch bell of Puch e50 engines and for the kickstart axle.
∙ 30 Pieces.

Complete set with:

∙ 2x Shim washer…

Mounting set Clutch bell / Clutch Push-start / Pedal-start 11-Pieces Puch e50

∙ Mounting set clutch bell / clutch.
∙ This set contains all the parts to mount the clutch bell / clutch in a Puch e50 Push-start / Pedal-start…

Cirlip Front side Clutch bell Puch e50

∙ Circlip.
∙ Front side (Clutch side)
∙ This part secures the clutch bell on the crankshaft of a Puch e50 Push-start / Pedal-start and Kickstart engines.
∙ A…

Cirlip Rear side Clutch bell Puch e50

∙ Circlip.
∙ Rearside (Behind clutch bell)
∙ This part secures the clutch bell on the crankshaft of a Puch e50 Push-start / Pedal-start and Kickstart engines.
∙ A…

Shim Washer Clutch bell Front side Puch e50

∙ Shim washer.
∙ Front side (Clutch side)
∙ Set for adjusting the clutch bell of Puch e50 engines and for the kickstart axle.
∙ A Piece.

Measurements:

∙ Outer diameter:…

Shim Washer Clutch bell Rear side Puch e50

∙ Shim washer.
∙ Rear side (Behind clutch bell)
∙ Set for adjusting the clutch bell of Puch e50 engines and for the kickstart axle.
∙ A Piece.

Measurements:

∙ Outer diameter:…

VDMRacing Needlebearing Clutch bell Puch e50

∙ Needle bearing.
∙ Replacement part for the VDMRacing clutch bell and gears with needlebearing from our shop.
∙ Picture 2 is a example picture of the needlebearing in a…

Bearing Bush Brass Clutch bell Puch e50

∙ Bearing bush.
∙ Brass.
∙ Replacement part for the clutch bells and gears with bearing bush from the shop.​
∙ Picture 2 is a example picture of the bearing bush in a clutch…

Bearing Bush Clutch bell Tomos 2L / 3L Puch MV / VS / MS / Z50 / Etc

∙ Bearing bush.
∙ ​Replacement part for the clutch bell bearing bush of a Puch 2, 3 and 4 gear engine.
∙ Precisely fitting!

Measurements:

∙ Total…

Clutch Race KTM SX50 Model VDMRacing Top-Quality! Puch e50

∙ Clutch.
∙ Best clutch on the market!
∙ Suitable for Race, Cross and Street use!
∙ Plug & Play with the VDMRacing KTM SX50 Clutch bell of the shop in Puch e50…

Clutch Kickstart Adige Race Puch Maxi e50

∙ Clutch.
∙ Model with internal spring.
∙ Adige Race.

* It is recommended to soak the clutch in ATF oil for 24 hours before assembly.

* Can only be disassembled with the special…

Clutch 3-Segments Race! Push-start / Pedal-start Puch e50

∙ Clutch.
∙ Super plug & play clutch for beter performance.
∙ Suitable for street, cross and race use!
∙ With 2x Clutch spring sets 50N/mm & 100N/mm.
∙…

Clutch 3-Segments Race! Kickstart Puch e50

∙ Clutch.
∙ Super plug & play clutch for beter performance.
∙ Suitable for street, cross and race use!
∙ With 2x Clutch spring sets 50N/mm & 100N/mm.
∙ Reinforced with a…

Clutch DMP Sport - Race Kickstart Puch Maxi e50

∙ Clutch.
∙ Race / Sport model.
∙ Kickstart version.
∙ 3 Segments.
∙ Reinforced with a reinforcement ring!
∙ Plug & Play!
∙ With 3 strenghts springs: Blue, Yellow and…

Clutch DMP Sport - Race Push- / Pedal-start Puch Maxi e50

∙ Clutch.
∙ Race / Sport model.
∙ Push-start - Pedal-start version.
∙ 3 Segments.
∙ Reinforced with a reinforcement ring!
∙ Plug & Play!
∙ With 3 strenghts…

Clutch DMP Streetpro Race Push- / Pedal-start Puch Maxi e50

∙ Clutch.
∙ Race / Sport model.
∙ 3 Segments.
∙ Reinforced with a reinforcement ring!
∙ Plug & Play!
∙ With 3 strenghts springs: Blue, Yellow and Red.

3…

Clutch Push-start / Pedal-start 3-Segments Puch Maxi e50

∙ Clutch.
∙ 3-Segments model.
∙ With stiffer springs than the original clutch!
∙ Good replacement clutch for the original.

* It is recommended to soak the clutch…

Clutch Kickstart 3-Segments Puch Maxi e50

∙ Kickstart clutch.
∙ 3-Segments model.
∙ With stiffer springs than the original clutch!
∙ Good replacement clutch for the original.

* It is recommended to soak the clutch in ATF…

Clutch Conversion set 3-Segments Kevlar Race! Puch e50

∙ Clutch conversion set.
∙ Super replacement set for your original clutch for beter performance.
∙ Suitable for street, cross and race use!
∙ Kevlar lining!
∙ 3…

Clutch Second Gear Puch ZA50

∙ Clutch.
∙ Second Gear model.

Suitable for:

∙ Puch ZA50 Engines.

Clutch 1st Gear Newfren! Puch MSA

∙ Clutch.
∙ 1st Gear.
∙ Newfren!

Suitable for:

∙ Puch MSA Automatic engine.
∙ Sachs 50/A MAL (X), LS, ML (S), MLR (S, X), MLC.
∙ Sachs 50/A MB, MA (SF, I, X) S, DL (X), E (X)

Clutch Automatic Puch X30A Velux / MS50A / MV50A / VS50A / R50A

∙ Clutch.
∙ Automatic engine model.

Measurements:

∙ Outer diameter: 83.6mm.
∙ Inner diameter: 11.6mm.

Suitable for:

∙ Puch X30A (Velux)
∙ Puch…

Segment set Clutch 3-Segments as Original Puch e50

∙ Clutchsegment set.
∙ Model as Original.
∙ 3 Claw (Segments)

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start and Kickstart engines.

Segment set Clutch Adige Race kickstart Puch e50

∙ Segment set.
∙ Suitable for Adige Race clutch.
∙ Adige Race.

Suitable for:

∙ Puch Maxi e50 Kickstart engines.

Spring Clutch Adige Race kickstart Puch e50

∙ Clutch spring.
∙ Internal spring.
∙ Total length: 146mm.
∙ Suitable for Adige Race clutch.
∙ Adige Race.

Suitable for:

∙ Puch Maxi e50 kickstart motoren.

Clutchpuller Disassemble Tool Clutch Adige Race kickstart Puch e50

∙ Puller clutch.
∙ To disassemble a Adige Race clutch.
∙ Adige Race.

*First the clutch shoes must be removed, then you can pull the clutch out of the…

Clutch set Reinforced +70% Puch Z50

∙ Clutch set.
∙ Reinforced (+70%)
∙ Swiing.

Suitable for:

∙ Puch Z50 engine.

Clutch Plate Newfren A-Qaulity! Tomos 2L / 3L / 4L / Puch MV / VS / DS / Z50 / Etc

∙ Clutch plate.
∙ A Piece.
∙ Newfren. A-Qaulity!

Measurements:

∙ Inner diameter: 52mm.
∙ Outer diameter: 70mm.
∙ Outer diameter…

Clutch Plate Bent Lips! Tomos 2L / 3L / 4L / Puch MV / VS / DS / Z50 / Etc

∙ Clutch plate.
∙ Clutch plate with a bent steel inner plate therefore engages a wider surface in the clutch housing.
∙ The lining material used is…

Clutch Plate Tomos 2L / 3L / 4L / Puch MV / VS / DS / Z50 / Etc

∙ Clutch plate.
∙ A Piece.

Measurements:

∙ Inner diameter: 52mm.
∙ Outer diameter: 70mm.
∙ Outer diameter total: 75mm.

Suitable for:

Puch / Tomos 2 / 3…

Clutch plate Puch 6 Gears / M50Jet / Monza 6SL / Cobra 6V / Daytona 6V

∙ Clutchplate.
∙ A Piece.

Suitable for:

∙ Puch M50Jet.
∙ Puch Monza 6SL.
∙ Puch Cobra 6v.
∙ Puch Daytona 6v.

Original Puch article number

337.1.12.124.1

Intermediate Clutch plate Steel 12-Pins Puch 4 Gear / Z50 / Monza / Grandprix

∙ Intermediate clutch plate.
∙ Unclothed.
∙ Steel.
∙ Model with 12 pins.
∙ A Piece.

Suitable for:

4 Gear engines (New models)

∙ Puch…

Intermediate Clutch plate Steel 6-Pins Puch 2 / 3 / (4) Gear

∙ Intermediate clutch plate.
∙ Unclothed.
∙ Steel.
∙ Model with 6 pins.
∙ A Piece.

Suitable for:

2 and 3 Gear engines.

4 Gear engines (Old models)

∙…

Tension Bearing Clutch extra Reinforced! Puch Z50 / 2 / 3 Gears

∙ Tension bearing / pull bearing clutch.
∙ Extra Reinforced version!
∙ For models with 2 clutch plates.
∙ Screw thread: M10x1.
∙ Bearing housing with oil…

Tension Bearing Clutch extra Reinforced! Puch 4 Gear / R-Engine

∙ Tension bearing / pull bearing clutch.
∙ Extra Reinforced version!
∙ Screw thread: M10x1.
∙ Bearing housing with oil holes for extra oil supply!
∙ With…

Tension Bearing Clutch A-Qaulity! A.M.W Puch Z50 / 2 / 3 Gears

∙ Tension bearing / pull bearing clutch
∙ A-Qaulity!
∙ A.M.W.

Suitable for:

2 and 3 Gear engines.

∙ Puch Z50 2-Speed.
∙ Puch Velux.
∙ Puch MS.
∙ Puch…

Tension Bearing Clutch A-Qaulity A.M.W Puch 4 Gear / R-Engine

∙ Tension bearing / pull bearing clutch.
∙ A-Qaulity!
∙ A.M.W.

Suitable for:

4 Gear and R-Engines.

3 Gear engines with 3 clutch plates.

∙ Puch Maxi…

Tension Bearing Clutch Puch Z50 / 2 / 3 Gear

∙ Tension bearing / pull bearing clutch.
∙ For Puch 2 and 3 gear engines.

Suitable for:

∙ Puch Z50.
∙ Puch MS.
∙ Puch VS.
∙ Puch MV.
∙ Puch VS50D.
∙ Puch DS50 (3…

Tension Bearing Clutch Puch 4 Gear

∙ Tension bearing / pull bearing clutch.
∙ B-Qaulity.

Suitable for:

3 Gear engines with 3 clutch plates.

4 Gear engines.

∙ Puch VZ50-4.
∙ Puch DS50R.
∙ Puch DS50-4.
∙ Puch MC50…

Spring Holder Clutch bell Puch 2 / 3 Gear

∙ Spring holder clutch bell.
∙ Only for Puch 2 and 3 gear engines with a 2-plate clutch!

Measurements:

∙ Total height: 26mm.
∙ Height of wide profile: 21.5mm.

Suitable…

Springdisc Pressure plate Clutch Puch 2 / 3 / 4 Gear

∙ Clutch Spring disc / Pressplate.

Measurements:

∙ Outer diameter: 44mm.
∙ Inner diameter axle hole: 10mm.
∙ Height: 15.4mm.

Suitable for:

∙ Puch 2, 3 & 4 Gear…

Circlip Housing / Tension Bearing 45mm Puch / Universal

∙ Housing circlip.
∙ Model: 45mm.
∙ DIN 472.
∙ A Piece.

Measurements:

∙ Outer / Build-in diameter: 45mm.
∙ Thickness: -mm.

Suitable for:

∙ Puch Models…

Spring clutch Red Strengthened +40% Puch Z50 / 2 / 3 / 4 Gears

∙ Spring clutch.
∙ Strengthened (+40%)
∙ This spring is 40% harder than the original spring. The spring is suitable for middle to heavy tuned mopeds!
∙…

Spring clutch Blue Strengthened +20% Puch Z50 / 2 / 3 / 4 Gears

∙ Spring clutch.
∙ Strengthened (+20%)
∙ This spring is 20% harder than the original spring. The spring is suitable for middle to heavy tuned mopeds!
∙…

Clutch Spring Standard Puch Z50 / 2 / 3 / 4 Gears

∙ Spring clutch.
∙ Standard model.

Measurements:

∙ Diameter: 39mm.
∙ Height: 20mm.

Suitable for:

2, 3 & 4 Gear engines.

∙ Puch Z50 engine.
∙ Puch MV50.
∙ Puch…

Shift Dampers White extra Stiff Puch ZA50

∙ Shift Dampers.
∙ White model, extra stiff!
∙ Top-Quality!
∙ These shift dampers are a lot stiffer than the red shift dampers, because of this they are better suited for high…

Shift Dampers Red Puch ZA50

∙ Shift Dampers.
∙ Red model.
∙ Top-Quality, better Quality as original!

Measurements:

∙ Diameter: 19mm.
∙ Thickness: 8mm.

Suitable for:

∙ Puch ZA50 engines.

Locking Plate Clutch M8 Puch 2 / 3 Gear

∙ Locking plate.
∙ For the M8x1 nut on the crankshaft to fix the clutch.
∙ Suitable for the older Puch 2 and 3 gear engines.
∙ Diameter: 19.5mm.

Suitable for:

∙ Puch MS50.
∙…

Spring set Clutch Blue / Yellow / Red Puch e50

∙ Spring set clutch.

3 Strengths:

∙ Blue: For standart or slightly tuned Puch e50 engines (50cc)
∙ 3.85Kg/mm 1000/1500 rpm.​
∙ Yellow: For tuned Puch e50 engines…

Spring set Clutch Red Puch e50

∙ Spring set.
∙ Red model.
∙ For heavy tuned Puch e50 engines (70cc / 70cc+)
∙ 14.4Kg/mm 4500 / 6500 rpm.

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start and kickstart engines.

Spring set Clutch Yellow Puch e50

∙ Spring set.
∙ Yellow model.
∙ For tuned Puch e50 engines (70cc)
∙ 9.0Kg/mm 2500 / 3500 rpm.

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start and kickstart engines.

Spring set Clutch Blue Puch e50

∙ Spring set.
∙ Blue model.
∙ For standard and light tuned Puch e50 engines (50cc)
∙ 3.85Kg/mm 1000 / 1500 rpm.

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start and kickstart engines.

Spring set Clutch Standard Puch e50

∙ Spring set.
∙ Standard model.
∙ For standard Puch e50 engines (50cc)
∙ 3.0Kg/mm.

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start and kickstart engines.

Clutch Hub 4 Gear Puch Monza / Grand Prix

∙ Clutch hub.
∙ Newly produced, "Made in Germany".

Suitable for:

4 Gear Models with 12-Pins intermediates plates.

∙ Puch Monza.
∙ Puch GrandPrix.

Clutch bell with Primary drive gear Puch 2 / 3 Gear

∙ Clutch bell with primary drive gear.
∙ Clutch bell: 16 Teeth.
∙ Primary drive gear: 58 Teeth.
∙ NOS (With some rust marks)
∙ For Puch 2 and 3 gear engines (From…

Cover plate Axle Clutch Tomos 2L / 3L / Puch MV / VS / MS / Etc

∙ Coverplate clutch axle.
∙ Plastic.

Suitable for:

2 & 3 Gear Engines.

∙ Puch VS50.
∙ Puch MS50V.
∙ Puch DS50.
∙ Puch MV50.
∙ Puch X50 (2 & 3 Gear…

Clutch Lever New Model Tomos 2L / 3L / Puch MV / VS / MS / Etc

∙ Lever clutch.
∙ New model.
∙ Aluminium.

Suitable for:

Puch 2, 3 & 4 Gear Engines.

∙ Puch Z50 2-Speed.
∙ Puch MV50.
∙ Puch MS50(L).
∙ Puch…

Clutch Lever Old Model Tomos 2L / 3L / Puch MV / VS / MS / Etc

∙ Lever clutch.
∙ Old model.
∙ Steel.

Suitable for:

Puch 2, 3 & 4 Gear Engines.

∙ Puch Z50 2-Speed.
∙ Puch MV50.
∙ Puch MS50(L).
∙ Puch MS50V.
∙…

Centering Bolt Tomos 2L / 3L / Puch MV / VS / MS / Etc

∙ Centeringbolt.
∙ Metal.
∙ For the Tension bearing.

Suitable for:

Puch 2, 3 & 4 Gear Engines.

∙ Puch MV50.
∙ Puch MS50L.
∙ Puch MS50V.
∙ Puch M50.
∙ Puch…