Clutch Push-start / Pedal-start 3-Segments Puch Maxi e50

Customers also bought

• 
  Segment set Clutch 3-Segments as Original Puch e50

  Segment set Clutch 3-Segments as Original Puch e50
  
  ∙ Clutchsegment set.
  ∙ Model as Original.
  ∙ 3 Claw (Segments)
  
  Suitable for:
  
  ∙ Puch Maxi e50 Push-start / Pedal-start and Kickstart engines.

  € 22,⁹⁵

  Order
• 
  Circlip pressplate Clutch bell Push-start / Pedal-start Surflex Puch e50

  Circlip pressplate Clutch bell Push-start / Pedal-start Surflex Puch e50
  
  ∙ Circlip.
  ∙ This part secures the pressure plate / clutch bowl in the clutch bell of a Puch e50 Push-start / Pedal-start engine.
  ∙ Orginal Puch!
  ∙…

  € 2,⁹⁵

  Order
• 
  Spring set Clutch Blue / Yellow / Red Puch e50

  Spring set Clutch Blue / Yellow / Red Puch e50
  
  ∙ Spring set clutch.
  
  3 Strengths:
  
  ∙ Blue: For standart or slightly tuned Puch e50 engines (50cc)
  ∙ 3.85Kg/mm 1000/1500 rpm.​
  ∙ Yellow: For tuned Puch e50 engines…

  € 17,⁹⁵

  Order

• OFFER!

  
  Crankshaft Rito Full-round Race Top-Qaulity! Puch Maxi e50

  Crankshaft Rito Full-round Race Top-Qaulity! Puch Maxi e50
  
  ∙ Crankshaft.
  ∙ Full-round Race model!
  ∙ Old model crankshaft.
  ∙ Complete with Needle bearing.
  ∙ Rito, Top-Qaulity!
  
  Measurements:
  
  ∙ Big end: 16mm.
  ∙…

  € 152,⁹⁰ € 139,⁹⁵

  Order
• 
  Revision set 4-Bearing Old Model Puch Maxi e50

  Revision set 4-Bearing Old Model Puch Maxi e50
  
  Complete revision bearing / seal set for Puch e50 Engine with a old model crankshaft.
  
  ∙ 3x NTN Bearing 6203C3.
  ∙ 1x NTN Bearing 6203NR.
  ∙ 2x 17 / 40 / 7 Seal.
  ∙ 1x 22 / 40 /…

  € 32,⁹⁵

  Order
• 
  Freewheel Sprocket Puch Maxi

  Freewheel Sprocket Puch Maxi
  
  ∙ Freewheel sprocket.
  ∙ 23 Teeth.
  
  Suitable for:
  
  ∙ Puch Maxi Models.

  € 4,⁹⁹

  Order
• 
  Bearing / Seal set Crankshaft Old Model Puch Maxi e50

  Bearing / Seal set Crankshaft Old Model Puch Maxi e50
  
  Crankshaft bearing / seal set for Puch e50 old model crankshaft.
  
  ∙ 1x NTN Bearing 6203C3.
  ∙ 1x NTN Bearing 6203 NR.
  ∙ 1x Seal 17/40/7.
  ∙ 1x Seal 22/40/7.
  
  Suitable…

  € 17,⁹⁵

  Order
• 
  Needle bearing piston pin smallend 15 x 15 x 12 Puch models

  Needle bearing piston pin smallend 15 x 15 x 12 Puch models
  
  ∙ Needle bearing piston pin small end / crankshaft.
  ∙ For 12mm piston pin.
  ∙ 15 x 15 x 12.
  
  Measurements:
  
  ∙ Width: 15mm.
  ∙ Outer diameter: 15mm.
  ∙ Inner…

  € 4,⁹⁵

  Order
• 
  Spring set Clutch Blue Puch e50

  Spring set Clutch Blue Puch e50
  
  ∙ Spring set.
  ∙ Blue model.
  ∙ For standard and light tuned Puch e50 engines (50cc)
  ∙ 3.85Kg/mm 1000 / 1500 rpm.
  
  Suitable for:
  
  ∙ Puch Maxi e50 Push-start / Pedal-start and kickstart engines.

  € 3,⁹⁵

  Order
• 
  Revision set Complete 4-Bearing Push-start / Pedal-start New Model Puch Maxi e50

  Revision set Complete 4-Bearing Push-start / Pedal-start New Model Puch Maxi e50
  
  Complete revision set for Puch e50 Push-start / Pedal-start Engine 4-Bearing with a new model crankshaft.
  
  ∙ Liquid gasket (Red)
  ∙ ATF llD…

  € 59,⁹⁵

  Order