Repair set 12mm - 15mm Bing Carburetor Puch Maxi

∙ Repair / Rebuild kit.
∙ Complete set for the revision of your carburetor!

Suitable for:

12mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp…

Repair set 17mm Bing Carburetor Puch Monza

∙ Repar / Rebuild kit.
∙ Complete set for the revision of your carburetor!
∙ 4mm Jet stock (220)

Suitable for:

17mm Original & Replica Bing Carburetor.

∙ Puch Monza…

Repair set 19mm Bing Carburetor Universal

∙ Repair / Rebuild kit.
∙ Complete set for the revision of your carburetor!

Suitable for:

19mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙…

Repair set 20mm Bing Carburetor Universal

∙ Repair / Rebuild kit.
∙ Complete set for the revision of your carburetor!

Suitable for:

20mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙…

Throttle Drum Cover set 10mm - 15mm Bing Carburetor Puch Maxi

∙ Throttle drum cover set.
∙ Complete drum cover set for your carburetor!

Complete set with:

∙ Drum cover ( 20-980 )
∙ 2 x Bolt ( 40-414 )
∙ Gasket (…

Cable choke Conversion set 10 - 15mm Bing Carburetor Puch Maxi

∙ Cablechoke conversion set.
∙ Set to convert Hand choke to cable choke.

Complete set with:

∙ Mechanism.
∙ Choke pin.
∙ Slide.

Suitable for:

∙ 10mm…

Throttle Drum 12mm - 15mm Bing Carburetor Puch Maxi

∙ Throttle drum.

Suitable for:

12mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

22-180-24

Throttle Slide 10mm Bing Carburetor Puch Maxi

∙ Throttle drum / slide.

Suitable for:

10mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

22-140-10

Spring Throttle Drum 10mm - 15mm Bing Carburetor Puch Maxi

∙ Throttle drum spring.

Measurements:

∙ Length: 58mm.
∙ Diameter: 13mm.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙…

Choke Plate 10mm - 15mm Bing Carburetor Puch Maxi

∙ Chokeplate.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

57-485

Tickler set 4-Pieces 10mm - 15mm Bing Carburetor Puch Maxi

∙ Throttle needle.
∙ 4 Pieces.

Complete set with:

∙ Tickler stift.
∙ Cap.
∙ Spring.
∙ Washer.

Suitable for:

10mm - 15mm Original & Replica Bing…

Spring Tickler 10mm - 15mm Bing Carburetor Puch Maxi

∙ Tickler spring.

Measurements:

∙ Length: 27mm.
∙ Outer diameter: 3.5mm

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙…

Washer Tickler 10mm - 15mm Bing Carburetor Puch Maxi

∙ Tickler washer.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

Cable Adjustment Screw with Nut M6 x 0.75mm 10mm - 17mm Bing Carburetor Puch Maxi

∙ Cable adjustment screw.
∙ Adjustment screw complete with nut.
∙ M6 x 0.75mm.

Suitable for:

10mm - 17mm Original & Replica Bing…

Cable Adjustment Screw 5mm 10mm - 17mm Bing Carburetor Puch Maxi

∙ Cable adjustment screw.
∙ Adjustment screw for in the cable elbow guide.
∙ 5mm model.

Suitable for:

10mm - 17mm Original & Replica Bing Carburetor.

∙…

Cable Adjustment Nut 5mm 10mm - 17mm Bing Carburetor Puch Maxi

∙ Cable adjustment nut.
∙ Adjustment nut for the cable elbow guide.
∙ 5mm model.

Suitable for:

10mm - 17mm Original & Replica Bing Carburetor.

∙ Puch Maxi…

Cable Adjustment Nut 6mm 10mm - 17mm Bing Carburetor Puch Maxi

∙ Cable adjustment nut.
∙ Adjustment nut for the cable elbow guide.
∙ 6mm model.

Suitable for:

10mm - 17mm Original & Replica Bing Carburetor.

∙ Puch Maxi…

Chokepin 10mm - 15mm Bing Carburetor Puch Maxi

∙ Choke pin.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

52-105

Throttle Needle 10mm - 15mm Bing Carburetor Puch Maxi

∙ Throttle needle.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

46-051

Throttle Drum Cover 10mm - 15mm Bing Carburetor Puch Maxi

∙ Throttle drum cover.

Measurements:

∙ Length total: 34mm.
∙ Distance between mounting holes: 13mm.

Suitable for:

10mm - 15mm Original & Replica Bing…

Mounting Bolt set Throttle Drum Cover 2-Pieces 10mm - 17mm Bing Carburetor Puch Maxi

∙ Mounting bolts throttle drum cover.
∙ 2 Pieces.

Suitable for:

10mm - 17mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙…

Float Tank Cap 10mm - 17mm Bing Carburetor Puch Maxi

∙ Floater bowl.

Suitable for:

10mm - 17mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

30-530

Float Tank Cap Transparent 10mm - 17mm Bing Carburetor Puch Maxi

∙ Floater bowl.
∙ Transparent model.

Suitable for:

10mm - 17mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙…

Float 10mm - 17mm Bing Carburetor Puch Maxi

∙ Floater.

Suitable for:

10mm - 17mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

35-218

Spring Throttle Drum Cover 10mm - 15mm Bing Carburetor Puch Maxi

∙ Spring throttle drum cover.
∙ Choke pin holder.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙…

Idle Adjusting Screw 10mm - 15mm Bing Carburetor Puch Maxi

∙ Idle adjusting screw.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article…

Spring Idle Adjusting Screw 10mm - 15mm Bing Carburetor Puch Maxi

∙ Spring idle adjusting screw.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to…

Banjo Fuel Hose Connection Angled 10mm - 15mm Bing Carburetor Puch Maxi

∙ Banjo fuel hose connection.
∙ Angled model.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp…

Banjo Bolt Fuel Hose Connection Angled 10mm - 15mm Bing Carburetor Puch Maxi

∙ Banjo bolt fuel hose connection.
∙ For angled model fuel hose connection.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙…

Banjo Fuel Hose Connection Straight 10mm - 17mm Bing Carburetor Puch Maxi

∙ Banjo fuel hose connection.
∙ Straight model.

Suitable for:

10mm - 17mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp…

Float Pin 10mm - 17mm Bing Carburetor Puch Maxi

∙ Floater / Floatpin.
∙ For mounting the floater on the carburetor.

Suitable for:

10mm - 17mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp…

Clip Throttle Needle 10mm - 15mm Bing Carburetor Puch Maxi

∙ Clamp throttle needle.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article…

Spring Plate Throttle Slide 10mm - 17mm Bing Carburetor Puch Maxi

∙ Spring plate throttle slide.

Suitable for:

10mm - 17mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to…

Clamp Bolt 10mm - 15mm Bing Carburetor Puch Maxi

∙ Clamp Bolt.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

40-430

Choke Cap Long 10mm - 15mm Bing Carburetor Puch Maxi

∙ Choke cap / extension.
∙ Long model.

Measurements:

∙ Inner diameter: 3mm.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙…

Choke Cap 10mm - 15mm Bing Carburetor Puch Maxi

∙ Choke cap.

Measurements:

∙ Outer diameter: 12mm.
∙ Inner diameter: 3mm.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

∙ Puch Maxi Models.
∙ Zundapp…

Housing 12mm Bing Replica Carburetor Puch Maxi

∙ Carburetor hous.
∙ 12mm Bing Replica model.

Suitable for:

∙ Puch Maxi Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

Float Needle 10mm - 15mm - Sqaure 17 / 18 Bing Carburetor Puch Maxi

∙ Floater needle.
∙ Mounted on the floater.

Suitable for:

10mm - 15mm Original & Replica Bing Carburetor.

Type 17 & 18 Sqaure model Bing Carburetor.

∙…

Cable Guide Elbow 90° Degrees 6mm x 0.75mm Brass 10mm - 17mm Bing Carburetor Puch Maxi

∙ Adjusting screw cable guide.
∙ Elbow 90° Degrees model.
∙ 6mm x 0.75mm.
∙ Brass.

Suitable for:

10mm - 17mm Original & Replica…

Cable Guide Elbow 90° Degrees 6mm x 0.75mm 10mm - 17mm Bing Carburetor Puch Maxi

∙ Adjusting screw cable guide.
∙ Elbow 90° Degrees model.
∙ 6mm x 0.75mm.

Suitable for:

10mm - 17mm Original & Replica Bing…

Cable Guide Elbow 90° Degrees 6mm x 0.75mm 10mm - 17mm Bing Carburetor Puch Maxi

∙ Adjusting screw cable guide.
∙ Elbow 90° Degrees model.
∙ 6mm x 0.75mm.

Suitable for:

10mm - 17mm Original & Replica Bing…

Cable Guide Elbow 45° Degrees 6mm x 0.75mm 10mm - 17mm Bing Carburetor Puch Maxi

∙ Adjusting screw cable guide.
∙ Elbow 45° Degrees model.
∙ 6mm x 0.75mm.

Suitable for:

10mm - 17mm Original & Replica Bing…

Rubber adjusting bolt throttle cable carburetor Bing / Dellorto PHBG / SHA

∙ Grommet / Rubber adjusting bolt.
∙ Rubber placed over the trottle cable / Adjusting bolt.

Suitable for:

∙ 16mm t/m 21mm Original and Replica…

Clamp Bolt M6 x 24mm Bing Carburetor Kreidler / Universal

∙ Clamp bolt.

Measurements:

∙ Diameter: 6mm.
∙ Length: 24mm.
∙ Screw thread: M6 x 1.0mm.

Suitable for:

Bing 1/16/59 & Bing 1/18/13 Carburetor.

∙ Kreidler…

Spring Idle Adjusting Screw 17mm Bing Carburetor Zündapp / Universal

∙ Idle adjusting screw spring.

Suitable for:

17mm Original & Replica Bing Carburetor.

∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

60-140

Idle Adjusting Screw 17mm Bing Carburetor Zündapp / Universal

∙ Idle adjusting screw.

Suitable for:

17mm Original & Replica Bing Carburetor.

∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

40-427

Cover Float Chamber 17mm Bing Carburetor Zündapp / Universal

∙ Floater chamber cover.

Suitable for:

17mm Original & Replica Bing Carburetor.

∙ Zundapp Models.
∙ Etc.

Identical to Bing article number

40-427

Float 17mm Bing Carburetor Zündapp / Universal

∙ Floater.

Measurements:

∙ Diameter: 26mm.
∙ Height: 22mm.
∙ Length needle: 42mm.

Suitable for:

17mm Original & Replica Bing Carburetor.

∙ Zundapp Models.
∙…

Throttle Slide 18mm Replica Bing Carburetor Universal

∙ Throttle drum.

Suitable for:

18mm Replica Bing Carburetor.

∙ Universal to use on various moped models.

Identical to Bing article number

22-265

Throttle Needle 18mm Bing Carburetor Universal

∙ Throttle needle.

Measurements:

∙ Diameter: 2.5mm.
∙ Length: 41.5mm.

Suitable for:

18mm 1/18/13 Bing Carburetor.

∙ Universal to use on various moped models.
∙ Puch…

Spring Tickler 19mm Bing Carburetor Universal

∙ Tickler spring.

Measurements:

∙ Diameter: 4.5mm.
∙ Length: 55mm.

Suitable for:

19mm 1/19/14 Bing Carburetor.

∙ Universal to use on various moped models.
∙ Puch…

Tickler 19mm Bing Carburetor Universal

∙ Tickler.

Measurements:

∙ Length: 39mm.

Suitable for:

19mm 1/19/14 Bing Carburetor.

∙ Universal to use on various moped models.
∙ Puch Models.
∙ Zundapp Models.
∙…

Throttle Needle 19mm Bing Carburetor Universal

∙ Throttle needle.

Suitable for:

19mm 1/19/14 Bing Carburetor.

∙ Universal to use on various moped models.
∙ Puch Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing…

Throttle Slide 19mm Bing Carburetor Universal

∙ Throttle drum.

Measurements:

∙ Diameter: 20.5mm.
∙ Length: 32mm.

Suitable for:

19mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped…

Float Needle 19mm Bing Carburetor Universal

∙ Floater needle.

Suitable for:

19mm 1/19/14 Bing Carburetor.

∙ Universal to use on various moped models.
∙ Puch Models.
∙ Zundapp Models.
∙ Etc.

Identical to Bing article…

Float set 17mm - 18mm - 19mm - 20mm Bing Carburetor Universal

∙ Floater set.
∙ Complete with floater pin.

Suitable for:

Bing Crown carburetors like Bing 1/17/73 / Bing 1/18/13 / Bing 1/19/14 / Bing 1/20/59 / Etc.

∙…

Split pin Tickler 19mm - 20mm Bing Carburetor Universal

∙ Splitpin tickler.

Suitable for:

19mm & 20mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Puch Models.
∙ Kreidler…

Nut Throttle Drum Cover 19mm - 20mm Bing Carburetor Universal

∙ Nut throttle drum cover.

Suitable for:

19mm - 20mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.

Identical to Bing article…

Spring Tickler 20mm Bing Carburetor Universal

∙ Tickler spring.

Measurements:

∙ Diameter: 4.5mm.
∙ Length: 35mm.

Suitable for:

Bing 1/20/59 / Bing 1/20/100 Carburetor.

∙ Universal to use on various moped…

Tickler 20mm Bing Carburetor Universal

∙ Tickler.

Measurements:

∙ Length: 21mm.

Suitable for:

20mm Bing 1/20/59 & Bing 1/20/100 Carburetor.

∙ Universal to use on various moped models.
∙ Puch Models.
∙ Zundapp…

Throttle Slide 20mm Bing Carburetor Kreidler / Universal

∙ Throttle drum.

Suitable for:

20mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Kreidler Models.
∙ Etc.

Identical to Bing…

Suction Bushing 19mm Bing Carburetor Zündapp / Universal

∙ Suction bushing.

Measurements:

∙ Inner diameter: 19mm,
∙ Outer diameter: 25mm.
∙ Length: 27mm.

Suitable for:

19mm Original & Replica Bing Carburetor.

∙…

Choke Schieber 20mm Bing Carburetor Kreidler / Universal

∙ Choke Schieber.

Suitable for:

20mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Kreidler Models.
∙ Etc.

Identical to Bing…

Clamp 20mm Bing Carburetor Kreidler / Universal

∙ Clamp.

Suitable for:

20mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Kreidler Models.
∙ Etc.

Identical to Bing article…

Adapter Ring 40mm > 60mm 20mm Bing Carburetor Kreidler / Universal

∙ Adapter ring.

Measurements:

∙ Inner diameter: 40mm,
∙ Outer diameter: 60mm.

Suitable for:

20mm Original & Replica Bing Carburetor.

∙ Universal to…

Throttle Drum Cover 10mm Bing Carburetor Kreidler / Universal

∙ Throttle drum cover.

Suitable for:

10mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Kreidler Models.
∙…

Choke Plate 10mm Bing Carburetor Kreidler / Universal

∙ Chokeplate.

Suitable for:

10mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Kreidler Models.
∙ Etc.

Identical to Bing…

Choke Pin 10mm Bing Carburetor Kreidler / Universal

∙ Chokepin.

Suitable for:

10mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Kreidler Models.
∙ Etc.

Identical to Bing article…

Throtte Slide 10mm Bing Carburetor Kreidler / Universal

∙ Throttle drum.

Suitable for:

10mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Kreidler Models.
∙ Etc.

Identical to Bing…

Clamping Bracket 10mm Bing Carburetor Kreidler / Universal

∙ Clamp bracket.

Suitable for:

10mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Kreidler Models.
∙ Etc.

Identical to…

Clip Throttle Needle 10mm Bing Carburetor Kreidler / Universal

∙ Throttle needle clip.

Suitable for:

10mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Kreidler Models.
∙…

Spring Throtte Slide 10mm Bing Carburetor Kreidler / Universal

∙ Throttle drum spring.

Measurements:

∙ Inner diameter: 9mm.
∙ Outer diameter: 11mm.
∙ Length: 45mm.

Suitable for:

10mm Original & Replica Bing…

Spring Plate Throttle Needle 10mm Bing Carburetor Kreidler / Universal

∙ Throttle needle spring plate.

Suitable for:

10mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Kreidler…

Float 10mm Bing Carburetor Kreidler / Universal

∙ Floater.

Suitable for:

10mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Kreidler Models.
∙ Etc.

Identical to Bing article number

35-217

Throttle Needle 10mm Bing Carburetor Kreidler / Universal

∙ Throttle needle.

Measurements:

∙ Length: 32.3mm.

Suitable for:

10mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙…

Clamp Bolt 10mm Bing Carburetor Kreidler / Universal

∙ Clamp bolt.

Suitable for:

10mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Kreidler Models.
∙ Etc.

Identical to Bing article…

Throttle Drum Cover 17mm Bing Carburetor Puch Monza / Universal

∙ Throttle slide cover.

Suitable for:

17mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Puch Monza Models.
∙ Kreidler…

Throttle Needle 17mm Bing Carburetor Puch Monza / Universal

∙ Throttle needle.

Suitable for:

17mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Puch Monza Models.
∙ Kreidler…

Throttle Drum 17mm Bing Carburetor Puch Monza / Universal

∙ Throttle slide.

Suitable for:

17mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Puch Monza Models.
∙ Kreidler Models.
∙…

Choke Plate 17mm Bing Carburetor Puch Monza / Universal

∙ Chokeplate.

Suitable for:

17mm Original & Replica Bing Carburetor.

∙ Universal to use on various moped models.
∙ Puch Monza Models.
∙ Kreidler Models.
∙…