Top Racing crankshaft full round

∙ For Puch e50 engine.
∙ Full round model.
∙ New model crankshaft.
∙ Big-end:14mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ Top Qaulity!
∙ Top Racing.

Top Racing crankshaft

∙ For Puch e50 engine.
∙ New model crankshaft.
∙ Big-end:14mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ Top Qaulity!
∙ Top Racing.

DMP crankshaft 2.0 full round

∙ For Puch e50 engine.
∙ Full round model.
∙ Old model crankshaft.
∙ Silver bearing.
∙ Big-end:16mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ Top Qaulity (Suitable till 15.000 rpm)
∙ DMP.

DMP crankshaft full round​

∙ For Puch e50 engine.
∙ Full round model.
∙ Old model crankshaft.
∙ Silver bearing.
∙ Big-end:16mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ Top Qaulity (Suitable till 15.000 rpm)
∙ DMP.

DMP Dakar Race crankshaft full round

∙ For Puch e50 engine.
∙ Full round model.
∙ Old model crankshaft.
∙ Big-end:16mm (Closed and Polished)
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ Top Qaulity! (Suitable…

CM crankshaft standard

∙ For Puch e50 engine.
∙ Standard model.
∙ Old model crankshaft.
∙ Big-end:14mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ CM.

DMP crankshaft standard​

∙ For Puch e50 engine.
∙ Standard model.
∙ Old model crankshaft.
∙ Big-end:14mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ DMP.

Rito crankshaft full round set

∙ For Puch e50 engine.
∙ Full round model.
∙ Old model crankshaft.
∙ Big-end:16mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ Top Qaulity!
∙ Rito.

Bearings and seals are…

Top Racing crankshaft full round set

∙ For Puch e50 engine.
∙ Full round model.
∙ New model crankshaft.
∙ Big-end:14mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ Top Qaulity!
∙ Top Racing.

Bearings and…

Top Racing crankshaft set

∙ For Puch e50 engine.
∙ New model crankshaft.
∙ Big-end:14mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ Top Qaulity!
∙ Top Racing.

Bearings and seals are included:

∙ 1x…

DMP crankshaft 2.0 full round set

∙ For Puch e50 engine.
∙ Full round model.
∙ Old model crankshaft.
∙ Silver bearing.
∙ Big-end:16mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ Top Qaulity (Suitable till…

DMP crankshaft full round set

∙ For Puch e50 engine.
∙ Full round model.
∙ Old model crankshaft.
∙ Silver bearing.
∙ Big-end:16mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ Top Qaulity (Suitable till…

DMP Dakar Race crankshaft full round set

∙ For Puch e50 engine.
∙ Full round model.
∙ Old model crankshaft.
∙ Big-end:16mm (Closed and Polished)
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ Top Qaulity!…

CM crankshaft standard set

∙ For Puch e50 engine.
∙ Standard model.
∙ Old model crankshaft.
∙ Big-end:14mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ CM.

Bearings and seals are included:

∙ 1x Bearing…

DMP crankshaft standard set

∙ For Puch e50 engine.
∙ Standard model.
∙ Old model crankshaft.
∙ Big-end:14mm.
∙ Piston pin:12mm.
∙ Complete with needlebearing.
∙ DMP.

Bearings and seals are included:

∙ 1x Bearing…

Crankshaft bearing/seals set (Old model)

Complete Crankshaft bearing/seals set for Puch e50 Old model crankshaft.

∙ 1x bearing 6203C3 NTN.
∙ 1x bearing 6203 NR.
∙ 1x 17/40/7 seal.
∙ 1x 22/40/7 seal.

Brand:NTN.

*Click…

Crankshaft bearing/seals set (New model)

Complete Crankshaft bearing/seals set for Puch e50 New model crankshaft.

∙ 1x SKF bearing 6203C3.
∙ 1x SKF bearing 6203 NR (Smaller inner ring)
∙ 2x 17/40/7 seal.

Brand:SKF

*Click…

Crankshaft High-End +1mm hub Swiing Puch X30/Z50

∙ Krukas.
∙ High end racing crankshaft.
∙ High-quality and accurately fitting full cheek crankshaft weighing 942 grams, which has proven itself in a wide variety of load…

Crankshaft Top Racing (ZA50 2-Speed Automatic)∙ Crankshaft.
∙ 10.2mm pin.
∙ Diameter Brass bush:10.2mm (Clutch baskets with an inside diameter of 10.25 mm fit on this crankshaft.

Suitable for:

∙ Puch ZA50 2-Speed Automatic.

Crankshaft Swiing (ZA50 engine)∙ Suitable for Puch X30 NG-2AH, Puch X30 N-2A, Puch Maxi S 2AH and Puch Supermaxi LG2 mopeds.
∙ Complete with needlebearing.
∙ Diameter brass bush:10,2 mm (clutch bell with a inside diameter of…

Crankshaft (ZA50 engine)∙ Suitable for Puch X30 NG-2AH, Puch X30 N-2A, Puch Maxi S 2AH and Puch Supermaxi LG2 mopeds.
∙ Complete with needlebearing.
∙ Diameter brass bush:9,5mm (clutch bell with a inside diameter of 9,5mm…

Crankshaft Top Racing (Z50 engine)∙ For Puch Z50/X30 engines (2 Speed Manual)
∙ Complete with needlebearing.
∙ Big-end:14mm.
∙ Piston pin:12mm.
∙ Top Racing.

Crankshaft Rito full round Puch MV/VS/Co/Z50 engine∙ Crankshaft.
∙ Complete with needlebearing.
∙ Fullround.
∙ Big-end:16mm.
∙ Piston pin:12mm.
∙ Top Qaulity!
∙ Rito.

Suitable for:

∙ Puch Z50 engine (Only with…

Crankshaft Barikit Puch MV/VS/Monza/X50 3/4 gear

∙ Crankshaft.
∙ Barikit.
∙ 14mm Bigend.
∙ 12mm piston pin.
∙ For Puch 3 and 4 gear engines.

Suitable for:

∙ Puch MV (3 and 4 gear)
∙ Puch VS (3 and 4 gear)
∙ Puch…

Crankshaft CM Puch MV/VS/Monza/X50 3/4 gear

∙ Crankshaft.
∙ CM.
∙ 14mm Bigend.
∙ 12mm piston pin.
∙ For Puch 3 and 4 gear engines.

Suitable for:

∙ Puch MV (3 and 4 gear)
∙ Puch VS (3 and 4 gear)
∙ Puch Monza (3…

Crankshaft DMP Puch MV/VS/Monza/X50 3/4 gear

∙ Crankshaft.
∙ DMP.
∙ 14mm Bigend.
∙ 12mm piston pin.
∙ Both sides have M10x1 thread.
∙ For Puch 3 and 4 gear engines.

Suitable for:

∙ Puch MV (3 and 4 gear)
∙ Puch…

Crankshaft DMP Dakar Race Puch MV/VS/Monza/X50 3/4 gear (Full round)

∙ Crankshaft.
∙ DMP Dakar Race.
∙ Full round model.
∙ 14mm Bigend.
∙ 12mm piston pin.
∙ Botsh sides have M10x1 thread.
∙ For Puch 3 and 4 gear…

Crankshaft Rito Race Puch MV/VS/Monza/X50 3/4 gear (Full round)

∙ Crankshaft.
∙ Rito Race.
∙ Top-Qaulity!
∙ Full round model.
∙ 16mm Bigend.
∙ 12mm piston pin.
∙ For Puch 3 and 4 gear engines.

Suitable for:

∙…

Crankshaft CM Puch MV/VS/Co 2 gear hand and foot shift (Full round)

∙ Crankshaft.
∙ CM.
∙ Full round model.
∙ 14mm Bigend.
∙ 12mm piston pin.
∙ For Puch 2 gear hand shift and foot shift engines.
∙ Order the right…

Crankshaft CM Puch MV/VS/Co 2 gear hand and foot shift

∙ Crankshaft.
∙ CM.
∙ 14mm Bigend.
∙ 12mm piston pin.
∙ For Puch 2 gear hand shift and foot shift engines.
∙ Order the right nut for this crankshaft…

Crankshaft Top Racing Puch MV/VS/Monza/X50 3/4 gear

∙ Crankshaft.
∙ Top Racing.
∙ 14mm Bigend.
∙ 12mm piston pin.
∙ For Puch 3 and 4 gear engines.

Suitable for:

∙ Puch MV (3 and 4 gear)
∙ Puch VS (3 and 4…

Crankshaft Top Racing Puch MV/VS/Co 2 gear hand and foot shift

∙ Crankshaft.
∙ Top Racing.
∙ 14mm Bigend.
∙ 12mm piston pin.
∙ For Puch 2 gear manual and pedal shift engines.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Puch Co.

Needlebearing small end Malossi MHR

∙ Needlebearing piston pin.
∙ 15x15x12.
∙ For 12mm pin.
∙ Malossi MHR.
∙ Top-Qaulity!

Suitable for:

∙ Puch Maxi.

Needlebearing small end Polini

∙ Needlebearing piston pin.
∙ 15x15x12.
∙ For 12mm pin.
∙ Polini.
∙ Top-Qaulity!

Suitable for:

∙ Puch Maxi.

Needlebearing small end (Prox)

∙ 16x15x12.
∙ Prox.
∙ Top-Qaulity!

*Pay attention! Fits on a 70cc piston without problems, a 50cc piston needs some work because this needlebearing is 1mm wider than original!

Needlebearing small end (Jasil)

∙ 15x15x12.
∙ Jasil.

Needlebearing small end

15x15x12

Connection rod bush (14x12x12)

∙ For Puch e50 engines.
∙ For old model Connection rod.
∙ 14x12x12.

Connecting rod 14mm Big-end (Standard model)

∙ Connecting rod.
∙ For Puch e50 engines.
∙ Standard model.

Measurements:

∙ Diameter Big-end:14mm.
∙ Top-end needlebearing:12x15x15mm.
∙ Length:34mm.

Connecting rod 16mm Big-end (Rito Race model)

∙ Connecting rod.
∙ For Puch e50 engines.
∙ Rito model.
∙ Fits on every crankshaft wit a 16mm Big-end.
∙ Top-Qaulity!

Measurements:

∙ Diameter Big-end:16mm.
∙ Top-end…

Connecting rod 14mm Big-end (Top Racing model)

∙ Connecting rod.
∙ For Puch e50 engines.
∙ Top Racing model.
∙ Silver cage Big-end needlebearing.
∙ Top-Qaulity!

Measurements:

∙ Diameter Big-end:14mm.
∙ Top-end…

Connecting rod 14mm Big-end (Italy model)

∙ Connecting rod.
∙ For Puch e50 engines.
∙ Made in Italy model.
∙ Top-Qaulity!

Measurements:

∙ Diameter Big-end:14mm.
∙ Top end needlebearing:12x15x15mm.
∙ Length:34.5mm.

Connecting rod 14mm Big-end (Barikit)

∙ Connecting rod.
∙ For Puch e50 engines.
∙ Standard model.
∙ Barikit.

Measurements:

∙ Diameter Big-end:14mm.
∙ Top-end needlebearing:12x15x15mm.
∙ Length:34mm.

Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.1)

∙ 17x24x0.1
∙ For shimming crankshafts with L17 en BO17 bearings.
∙ A Piece.

Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.2)

∙ 17x24x0.2
∙ For shimming crankshafts with L17 en BO17 bearings.
∙ A Piece.

Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.3)

∙ 17x24x0.3
∙ For shimming crankshafts with L17 en BO17 bearings.
∙ A Piece.

Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.5)

∙ 17x24x0.5
∙ For shimming crankshafts with L17 en BO17 bearings.
∙ A Piece.

Shim washer for crankshaft with L17 and BO17 bearings (17x24x1.0)

∙ 17x24x1.0
∙ For shimming crankshafts with L17 en BO17 bearings.
∙ A Piece.

Shim washer for crankshaft with L17 and BO17 bearings (17x24x1.5)

∙ 17x24x1.5.
∙ For shimming crankshafts with L17 en BO17 bearings.
∙ A Piece.

Crankshaft nut CM Puch MV/VS/Co 2 gear (M8x1)

∙ Crankshaft nut.
∙ For CM crankshaft 2 gear.
∙ Clutch nut M8x1.

Suitable for:

∙ Crankshaft CM Puch MV/VS/Co 2 gear hand and foot shift (Full round)
∙ Crankshaft CM Puch…