Are you looking for a gaskets or supplies for your Puch? 
Here you will find our wide range of gasket and gasket parts for all Puch models such as Puch Maxi, Monza, Magnum X, Magnum, MV, VS, MS, DS. Choose from a complete gasket set or other gaskets Suitable for your Street, Race and Cross Puch. You will also find all necessities such as gasket paper, liquid gasket, the tools that are needed and much more!
Have you not found your part or do you have questions about a part? Contact us for a quick response!
Gasket Clutch cover Push-start / Pedal-start 0.5mm Puch Maxi e50Gasket Clutch cover Push-start / Pedal-start 0.5mm Puch Maxi e50
∙ Clutch cover gasket.
∙ Good Qaulity!
∙ Push-start / Pedal-start engine model.
∙ Thickness: 0.5mm.
Suitable for:
∙ Puch e50 Push start / Pedal-start engines.€ 2,25
Gasket Clutch cover Push-start / Pedal-start Puch Maxi e50Gasket Clutch cover Push-start / Pedal-start Puch Maxi e50
∙ Clutch cover gasket.
∙ Thin Qaulity.
∙ Push-start / Pedal-start engine model.
Suitable for:
∙ Puch e50 Push start / Pedal-start engines.€ 0,75
Gasket set 70cc (45mm) 6-Pieces Puch Maxi e50Gasket set 70cc (45mm) 6-Pieces Puch Maxi e50
∙ Gasketset.
∙ 70cc (45mm)
∙ Complete set.
Complete set with:
∙ 1x Clutch cover gasket (Kickstart model)
∙ 1x Clutch cover gasket (Push-start / Pedal-start model)
∙ 1x…€ 3,95
Gasket set 50cc (38mm) 6-Pieces Puch Maxi e50Gasket set 50cc (38mm) 6-Pieces Puch Maxi e50
∙ Gasketset.
∙ 50cc (38mm)
∙ Complete set.
Complete set with:
∙ 1x Clutch cover gasket (Kickstart model)
∙ 1x Clutch cover gasket (Push-start / Pedal-start model)
∙ 1x…€ 3,95
Clutch cover / Crank case Gasket set Puch Maxi ZA50Clutch cover / Crank case Gasket set Puch Maxi ZA50
∙ Clutch cover / Middle crank case gasket set.
∙ Good Qaulity!
Complete set with:
∙ Clutch cover gasket (Picture 2)
∙ Middle crank case gasket (Picture 3)
Suitable…€ 7,50
Clutch cover Gasket Puch Maxi ZA50Clutch cover Gasket Puch Maxi ZA50
∙ Clutch cover gasket.
∙ Good Qaulity!
Suitable for:
∙ Puch ZA50 Engines.€ 3,95
Clutch cover Gasket 0.8mm BAC Top-Qaulity Puch Maxi Z50Clutch cover Gasket 0.8mm BAC Top-Qaulity Puch Maxi Z50
∙ Clutch cover Gasket.
∙ Thickness: 0.8mm.
∙ BAC, Top-Qaulity!
Suitable for:
∙ Puch Z50 Engines.
Identical to Puch article number
321.1.10.649.1€ 2,95
Clutch cover Gasket Puch Maxi Z50Clutch cover Gasket Puch Maxi Z50
∙ Clutch cover Gasket.
∙ Good Qaulity!
Suitable for:
∙ Puch Z50 Engines.
Identical to Puch article number
321.1.10.649.1€ 2,50
Clutch cover Gasket with Oil Filler Plug Puch Maxi ZA50Clutch cover Gasket with Oil Filler Plug Puch Maxi ZA50
∙ Clutch cover gasket.
∙ For the type with the oil filler plug on the cover.
∙ Good Qaulity!
Suitable for:
∙ Puch ZA50 Engines.€ 2,95
Clutch cover Gasket Puch 2 / 3 GearClutch cover Gasket Puch 2 / 3 Gear
∙ Clutch cover gasket.
Suitable for:
∙ Puch MV 2 / 3 Gear Models.€ 3,25
Clutch cover Gasket 0.4mm Puch X30 VeluxClutch cover Gasket 0.4mm Puch X30 Velux
∙ Clutch cover Gasket.
∙ Thickness: 0.4mm
∙ Good Qaulity!
Suitable for:
∙ Puch X30 Velux Models.€ 7,95
Clutch cover Gasket Puch Monza / Grand PrixClutch cover Gasket Puch Monza / Grand Prix
∙ Clutch cover gasket.
Suitable for:
∙ Puch Monza.
∙ Puch Grand Prix.€ 3,25
Clutch cover Gasket Puch Monza-Jet Cobra 6 GearClutch cover Gasket Puch Monza-Jet Cobra 6 Gear
∙ Clutch cover gasket.
∙ Good Qaulity!
Suitable for:
∙ Puch Monza-Jet Cobra 6 Gear.
Identical to Puch article number
337.1.10.149.1€ 3,95
Gasket Clutch Cover BAC A-Qaulity! Tomos 4L / AT / ATX / NTXGasket Clutch Cover BAC A-Qaulity! Tomos 4L / AT / ATX / NTX
∙ Clutchcover gasket.
∙ BAC, A-Qaulity!
Suitable for:
∙ Tomos 4L.
∙ Tomos AT.
∙ Tomos ATX.
∙ Tomos NTX.€ 2,95
Crank case Gasket Puch Maxi ZA50Crank case Gasket Puch Maxi ZA50
∙ Middle crank case gasket.
∙ Good Qaulity!
Suitable for:
∙ Puch ZA50 Engines.€ 3,95
Crank case Gasket Puch Monza-Jet Cobra 6 GearCrank case Gasket Puch Monza-Jet Cobra 6 Gear
∙ Middle crankcase gasket.
∙ Good Qaulity!
Suitable for:
∙ Puch Monza-Jet Cobra 6 Gear Models.
Identical to Puch article number
337.1.10.131.1€ 3,95
Crank case gasket Puch MS50 / MS50LCrank case gasket Puch MS50 / MS50L
∙ Middle crank case gasket.
Suitable for:
First models 2 Gear without bushings from 1954 - 1955.
∙ Puch MS50.
∙ Puch MS50L.€ 2,95
Crank case Gasket 0.4mm Puch X30 VeluxCrank case Gasket 0.4mm Puch X30 Velux
∙ Middle crank case gasket.
∙ Thickness: 0.4mm
∙ Good Qaulity!
Suitable for:
∙ Puch X30 Velux Models.€ 14,95
Crank case Gasket Puch 2 / 3 Foot GearCrank case Gasket Puch 2 / 3 Foot Gear
∙ Middle crank case gasket.
∙ Good Quality!
Suitable for:
2 / 3 Foot Gear Models
∙ Puch MV Foot Gear.
∙ Puch VS Foor Gear.
∙ Puch Florida Foot Gear.
∙ Puch Skytrack Foot Gear.
∙ Etc.€ 3,95
Crank case Gasket 0.5mm BAC Top-Qaulity! Puch Maxi Z50Crank case Gasket 0.5mm BAC Top-Qaulity! Puch Maxi Z50
∙ Middle crank case gasket.
∙ Thickness: 0.5mm.
∙ BAC Top-Qaulity!
Suitable for:
∙ Puch Z50 Engines.€ 2,50
Crank case Gasket 0.4mm Tomos / Puch 2 / 3 Hand GearCrank case Gasket 0.4mm Tomos / Puch 2 / 3 Hand Gear
∙ Crank case Gasket.
∙ Thickness: 0.4mm.
∙ Top-Qaulity!
Suitable for:
2 / 3 Hand Gear engines.
∙ Puch MS50L.
∙ Puch MS50V Hand Gear
∙ Puch MV50 Hand Gear.
∙…€ 4,50
Crank case Gasket Tomos / Puch 2 / 3 Hand GearCrank case Gasket Tomos / Puch 2 / 3 Hand Gear
∙ Crank case Gasket.
∙ Top-Qaulity!
Suitable for:
2 / 3 Hand Gear engines.
∙ Puch MS50L.
∙ Puch MS50V Hand Gear
∙ Puch MV50 Hand Gear.
∙ Puch VZ50 Hand Gear.
∙ Puch…€ 3,25
Gasket Crank case BAC A-Kwaliteit! Tomos 4L / 4E / AT / ATX / NTX / SprintGasket Crank case BAC A-Kwaliteit! Tomos 4L / 4E / AT / ATX / NTX / Sprint
∙ Middle crankcase gasket.
∙ BAC, A-Qaulity!
Suitable for:
∙ Tomos 4L.
∙ Tomos 4E.
∙ Tomos AT.
∙ Tomos ATX.
∙ Tomos NTX.
∙ Tomos…€ 2,95
Gasket Turbo Housing Tomos / Puch 2 / 3 GearGasket Turbo Housing Tomos / Puch 2 / 3 Gear
∙ Turbo / cooling housing gasket.
∙ Good Qaulity!
Suitable for:
∙ Puch / Tomos 2 Gear Engines.
∙ Puch / Tomos 3 Gear Engines.
Identical to Puch article number
050.10.1036 ,…€ 2,95
Gearbox Gasket Puch 2 / 3 Foot GearGearbox Gasket Puch 2 / 3 Foot Gear
∙ Gear box / Shaft / Axle gasket.
Suitable for:
2 & 3 Foot Gear engines.
∙ Puch MV50 (Foot Gear)
∙ Puch DS50 3 Gear (Foot Gear)
∙ Puch MC50 3 Gear (Foot Gear)
∙ Puch VZ50 (Foot Gear)€ 2,25
Inlet Reed valve Gasket 74cc Gilardoni / Italkit Cylinder Puch MaxiInlet Reed valve Gasket 74cc Gilardoni / Italkit Cylinder Puch Maxi
∙ Inlet manifold / Reed valve gasket.
Measurements:
∙ Outer side: 73mm x 50mm.
∙ Inner side: 48mm x 43mm.
∙ Distance between mounting holes: 59mm x…€ 0,99
Inlet Reed valve Big hole Athena AJH Cylinder Puch MaxiInlet Reed valve Big hole Athena AJH Cylinder Puch Maxi
∙ Inlet manifold / Reed valve gasket.
∙ Model with big hole.
Measurements:
∙ Outer side: mm x mm.
∙ Inner side: mm x mm.
∙ Distance between mounting holes: 62mm…€ 0,85
Inlet Reed valve Gasket set Athena Small Reed valve Cylinder Puch MaxiInlet Reed valve Gasket set Athena Small Reed valve Cylinder Puch Maxi
∙ Inlet manifold / Reed valve gasket set.
∙ Athena Small Reed valve.
Measurements gasket bottom side:
∙ Outer side: 46mm x 45mm.
∙ Inner side: 31mm…€ 1,75
Inlet Reed valve Gasket 65cc Polini Cylinder Puch MaxiInlet Reed valve Gasket 65cc Polini Cylinder Puch Maxi
∙ Inlet manifold / Reed valve gasket.
Measurements:
∙ Inner side: 35mm x 29mm.
∙ Distance between mounting holes: 39mm x 35mm x 31mm.
∙ Thickness: 0.5mm
Suitable…€ 0,99
Inlet Reed valve Gasket Oval 65cc Polini Cylinder Puch MaxiInlet Reed valve Gasket Oval 65cc Polini Cylinder Puch Maxi
∙ Inlet manifold / Reed valve gasket.
∙ Oval model.
Measurements:
∙ Distance between mounting holes: 39mm x 35mm x 31mm.
∙ Thickness: 0.35mm.
Suitable…€ 1,25
Inlet Reed valve Small hole Athena AJH Cylinder Puch MaxiInlet Reed valve Small hole Athena AJH Cylinder Puch Maxi
∙ Inlet manifold / Reed valve gasket.
∙ Model with small hole.
Measurements:
∙ Outer side: mm x mm.
∙ Inner side: 38mm x 32mm.
∙ Distance between mounting…€ 1,25
Inlet Reed valve gasket Model PiaggioInlet Reed valve gasket Model Piaggio
∙ Inlet manifold / Reed valve gasket.
∙ Piaggio model.
Measurements:
∙ Inner side: 33mm x 30mm.
∙ Distance between mounting holes: 52mm.
∙ Thickness: 0.5mm
Suitable for:
∙…€ 1,25
Gasket set Reed valve Intake set 65cc Polini Malossi 3-Pieces Puch MaxiGasket set Reed valve Intake set 65cc Polini Malossi 3-Pieces Puch Maxi
∙ Gasket set Reed valve intake set Malossi.
∙ 3 Pieces.
Suitable for:
∙ Puch Maxi Models (65cc Polini Cylinder)
∙ Peugeot 103 SP / 104 / 105.
∙…€ 5,95
Exhaust gasket 32mm for exhaust manifold Puch MaxiExhaust gasket 32mm for exhaust manifold Puch Maxi
∙ Gasket ring ehaust.
∙ This gasket is placed between the exhaust header and silencer.
Measurements:
∙ Diameter inner side: 32mm.
∙ Diameter outer side: 40.5mm.
∙…€ 1,25
Exhaust Manifold Gasket 27mm Puch MaxiExhaust Manifold Gasket 27mm Puch Maxi
∙ Exhaust manifold gasket.
∙ This gasket is placed between the exhaust manifold and silencer.
∙ For standard 28mm model exhaust.
Measurements:
∙ Diameter inner side: 27mm.
∙…€ 1,25
Exhaust Manifold Gasket 22mm Puch MaxiExhaust Manifold Gasket 22mm Puch Maxi
∙ Exhaust manifold gasket.
∙ This gasket is placed between the exhaust manifold and silencer.
∙ For standard 28mm model exhaust.
Measurements:
∙ Diameter inner side: 22mm.
∙…€ 1,25
Exhaust Gasket 23mm for Exhaust Manifold Puch VS50 / MS50V / DS50 / MS25Exhaust Gasket 23mm for Exhaust Manifold Puch VS50 / MS50V / DS50 / MS25
∙ Gasket ring ehaust.
∙ This gasket is placed between the exhaust header and silencer.
Measurements:
∙ Diameter inner side: 23mm.
∙ Diameter outer…€ 2,50
O-Ring set Crank case 3-Pieces Puch Monza / Grand PrixO-Ring set Crank case 3-Pieces Puch Monza / Grand Prix
∙ O-Ringset Crank case.
∙ 3 Pieces.
Suitable for:
∙ Puch Monza.
∙ Puch Grand Prix.€ 1,95
O-Ring Inner Silencer Original / Tecno / Jamacrol Exhaust Puch MaxiO-Ring Inner Silencer Original / Tecno / Jamacrol Exhaust Puch Maxi
∙ O Ring inner silencer.
Measurements:
∙ Diameter: 47mm.
∙ Thickness: 0.3mm.
Suitable for:
∙ Puch Maxi (Original / Tecno / Jamacrol as Original exhaust)€ 0,75
Gasket set Polini Reed valve set 15mm / 19mm Puch MaxiGasket set Polini Reed valve set 15mm / 19mm Puch Maxi
∙ Reed valve gasket + O-Ring set.
∙ For Polini Reed valve kit 15mm / 19mm.
Suitable for:
∙ Puch Maxi Models.
Original Polini Article number
209.0260€ 3,95
O-Ring set Polini Reed valve set 15mm / 19mm Puch MaxiO-Ring set Polini Reed valve set 15mm / 19mm Puch Maxi
∙ O-Ring set.
∙ For Polini Reed valve kit 15mm / 19mm.
Suitable for:
∙ Puch Maxi Models.
Original Polini Article number
209.0260€ 1,95
Gasket Flywheel cover Puch e50 / ZA50 / Z50Gasket Flywheel cover Puch e50 / ZA50 / Z50
∙ Gasket / Isolation flywheel cover / ignition cover.
Suitable for:
∙ Puch e50 Engines.
∙ Puch ZA50 Engines.
∙ Puch Z50 Engines.€ 0,70
Fibre washer Oil Fill plug Puch Maxi e50Fibre washer Oil Fill plug Puch Maxi e50
∙ Fibrewasher oil fillplug.
∙ Placed in the clutch cover.
∙ A Piece.
Suitable for:
∙ Puch Maxi e50 Models.€ 0,25
Fibre washer Oil Drain plug Puch Maxi e50Fibre washer Oil Drain plug Puch Maxi e50
∙ Fibrewasher oil drainplug.
∙ Placed under the crankcase.
∙ A Piece.
Suitable for:
∙ Puch Maxi e50 Models.€ 0,25
Gasket rubber fuel cap Puch VZ50/DakotaGasket rubber fuel cap Puch VZ50/Dakota
∙ Gasket rubber fuel cap.
Suitable for:
∙ Puch VZ50.
∙ Puch Dakota.€ 6,95
Seal Ring Tank Cap Cork 36mm BAC A-Qaulity Puch / UniversalSeal Ring Tank Cap Cork 36mm BAC A-Qaulity Puch / Universal
∙ Fuel cap sealring.
∙ Cork.
∙ To replace the rubber in the fuel cap (with inner diameter 36mm / 38mm)
∙ Better resistance to fuel.
∙ BAC,…€ 3,95
Fuel cap cork seal ring Puch MV/VS/DSFuel cap cork seal ring Puch MV/VS/DS
∙ Fuel cap cork seal ring.
Measurements:
∙ Inner diameter:28mm.
∙ Outer diameter:43mm.
Suitable for:
∙ Puch MV.
∙ Puch VS.
∙ Puch DS.€ 3,25
O-Ring tank cap aluminiumO-Ring tank cap aluminium
∙ O-Ring.
∙ For aluminium tank cap.
∙ A Piece.€ 0,99
O-Ring tank cap with lockO-Ring tank cap with lock
∙ O-Ring.
∙ For tank cap with lock.
∙ A Piece.€ 1,25
Base Spacer Gilardoni / Italkit Cylinder set 0.50mm - 1.50mm 7-Pieces VDMRacing Puch Maxi e50Base Spacer Gilardoni / Italkit Cylinder set 0.50mm - 1.50mm 7-Pieces VDMRacing Puch Maxi e50
∙ Lifting plate / feet gasket.
∙ Handy set to find the right port timing!
∙ Big ports.
∙ Suitable for Tuning work or for…€ 46,95
Base Spacer Blind 50cc > 74cc Cylinder set 0.50mm - 1.50mm 7-Pieces VDMRacing Puch Maxi e50Base Spacer Blind 50cc > 74cc Cylinder set 0.50mm - 1.50mm 7-Pieces VDMRacing Puch Maxi e50
∙ Lifting plate / feet gasket.
∙ Handy set to find the right port timing!
∙ Blind model.
∙ Suitable for Tuning work or for…€ 39,95
Base Spacer 50cc > 70cc Cylinder set 0.50mm - 1.50mm 7-Pieces VDMRacing Puch Maxi e50Base Spacer 50cc > 70cc Cylinder set 0.50mm - 1.50mm 7-Pieces VDMRacing Puch Maxi e50
∙ Lifting plate / feet gasket.
∙ Handy set to find the right port timing!
∙ Standard ports.
∙ Suitable for Tuning work or for…€ 29,95
Base Spacer Gilardoni / Italkit Cylinder 0.50mm VDMRacing Puch MaxiBase Spacer Gilardoni / Italkit Cylinder 0.50mm VDMRacing Puch Maxi
∙ Lifting plate / Feet gasket.
∙ Big ports.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 0.5mm.
∙…€ 7,95- Base Spacer Gilardoni / Italkit Cylinder 0.60mm VDMRacing Puch Maxi
Base Spacer Gilardoni / Italkit Cylinder 0.60mm VDMRacing Puch Maxi
∙ Lifting plate / Feet gasket.
∙ Big ports.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 0.6mm.
∙…€ 7,95 - Base Spacer Gilardoni / Italkit Cylinder 0.70mm VDMRacing Puch Maxi
Base Spacer Gilardoni / Italkit Cylinder 0.70mm VDMRacing Puch Maxi
∙ Lifting plate / Feet gasket.
∙ Big ports.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 0.7mm.
∙…€ 7,95 - Base Spacer Gilardoni / Italkit Cylinder 0.80mm VDMRacing Puch Maxi
Base Spacer Gilardoni / Italkit Cylinder 0.80mm VDMRacing Puch Maxi
∙ Lifting plate / Feet gasket.
∙ Big ports.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 0.8mm.
∙…€ 7,95 - Base Spacer Gilardoni / Italkit Cylinder 1.00mm VDMRacing Puch Maxi
Base Spacer Gilardoni / Italkit Cylinder 1.00mm VDMRacing Puch Maxi
∙ Lifting plate / Feet gasket.
∙ Big ports.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 1.0mm.
∙…€ 7,95 - Base Spacer Gilardoni / Italkit Cylinder 1.20mm VDMRacing Puch Maxi
Base Spacer Gilardoni / Italkit Cylinder 1.20mm VDMRacing Puch Maxi
∙ Lifting plate / Feet gasket.
∙ Big ports.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 1.2mm.
∙…€ 7,95 - Base Spacer Gilardoni / Italkit Cylinder 1.50mm VDMRacing Puch Maxi
Base Spacer Gilardoni / Italkit Cylinder 1.50mm VDMRacing Puch Maxi
∙ Lifting plate / Feet gasket.
∙ Big ports.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 1.5mm.
∙…€ 7,95 
Base Spacer Blind 50cc > 74cc Cylinder 0.50mm VDMRacing Puch MaxiBase Spacer Blind 50cc > 74cc Cylinder 0.50mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Blind model.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Create the ports by yourself.
∙ Big enough…€ 6,95- Base Spacer Blind 50cc > 74cc Cylinder 0.60mm VDMRacing Puch Maxi
Base Spacer Blind 50cc > 74cc Cylinder 0.60mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Blind model.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Create the ports by yourself.
∙ Big enough…€ 6,95 - Base Spacer Blind 50cc > 74cc Cylinder 0.70mm VDMRacing Puch Maxi
Base Spacer Blind 50cc > 74cc Cylinder 0.70mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Blind model.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Create the ports by yourself.
∙ Big enough…€ 6,95 - Base Spacer Blind 50cc > 74cc Cylinder 0.80mm VDMRacing Puch Maxi
Base Spacer Blind 50cc > 74cc Cylinder 0.80mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Blind model.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Create the ports by yourself.
∙ Big enough…€ 6,95 - Base Spacer Blind 50cc > 74cc Cylinder 1.00mm VDMRacing Puch Maxi
Base Spacer Blind 50cc > 74cc Cylinder 1.00mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Blind model.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Create the ports by yourself.
∙ Big enough…€ 6,95 - Base Spacer Blind 50cc > 74cc Cylinder 1.20mm VDMRacing Puch Maxi
Base Spacer Blind 50cc > 74cc Cylinder 1.20mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Blind model.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Create the ports by yourself.
∙ Big enough…€ 6,95 - Base Spacer Blind 50cc > 74cc Cylinder 1.50mm VDMRacing Puch Maxi
Base Spacer Blind 50cc > 74cc Cylinder 1.50mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Blind model.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Create the ports by yourself.
∙ Big enough…€ 6,95 
Base Spacer 50cc > 70cc Cylinder 0.50mm VDMRacing Puch MaxiBase Spacer 50cc > 70cc Cylinder 0.50mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 0.5mm.
∙ VDMRacing!
Suitable for:
∙…€ 5,95- Base Spacer 50cc > 70cc Cylinder 0.60mm VDMRacing Puch Maxi
Base Spacer 50cc > 70cc Cylinder 0.60mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 0.6mm.
∙ VDMRacing!
Suitable for:
∙…€ 5,95 - Base Spacer 50cc > 70cc Cylinder 0.70mm VDMRacing Puch Maxi
Base Spacer 50cc > 70cc Cylinder 0.70mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 0.7mm.
∙ VDMRacing!
Suitable for:
∙…€ 5,95 - Base Spacer 50cc > 70cc Cylinder 0.80mm VDMRacing Puch Maxi
Base Spacer 50cc > 70cc Cylinder 0.80mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 0.8mm.
∙ VDMRacing!
Suitable for:
∙…€ 5,95 - Base Spacer 50cc > 70cc Cylinder 1.00mm VDMRacing Puch Maxi
Base Spacer 50cc > 70cc Cylinder 1.00mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 1.0mm.
∙ VDMRacing!
Suitable for:
∙…€ 5,95 - Base Spacer 50cc > 70cc Cylinder 1.20mm VDMRacing Puch Maxi
Base Spacer 50cc > 70cc Cylinder 1.20mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 1.2mm.
∙ VDMRacing!
Suitable for:
∙…€ 5,95 
Base Spacer 50cc > 70cc Cylinder 1.50mm VDMRacing Puch MaxiBase Spacer 50cc > 70cc Cylinder 1.50mm VDMRacing Puch Maxi
∙ Lifting plate / feet gasket.
∙ Suitable for Tuning work or for optimising the port timing.
∙ Aluminium.
∙ Thickness: 1.5mm.
∙ VDMRacing!
Suitable for:
∙…€ 5,95
Gasket paper 300mm x 450mm x 2.00mm Unreinforced ArteinGasket paper 300mm x 450mm x 2.00mm Unreinforced Artein
∙ Gasketpaper.
∙ Unreinforced.
∙ Artein.
Measurements:
∙ Measurements Sheet: 300mm x 450mm.
∙ Thickness: 2.00mm.
Data:
∙ Resistant up to 250° Celcius.
∙…€ 17,95- Gasket paper 300mm x 450mm x 1.50mm Unreinforced Artein
Gasket paper 300mm x 450mm x 1.50mm Unreinforced Artein
∙ Gasketpaper.
∙ Unreinforced.
∙ Artein.
Measurements:
∙ Measurements Sheet: 300mm x 450mm.
∙ Thickness: 1.50mm.
Data:
∙ Resistant up to 250° Celcius.
∙…€ 13,95 - Gasket paper 300mm x 450mm x 0.80mm Unreinforced Artein
Gasket paper 300mm x 450mm x 0.80mm Unreinforced Artein
∙ Gasketpaper.
∙ Unreinforced.
∙ Artein.
Measurements:
∙ Measurements Sheet: 300mm x 450mm.
∙ Thickness: 0.80mm.
Data:
∙ Resistant up to 250° Celcius.
∙…€ 9,95 
Gasket paper 300mm x 450mm x 1.00mm Unreinforced ArteinGasket paper 300mm x 450mm x 1.00mm Unreinforced Artein
∙ Gasketpaper.
∙ Unreinforced.
∙ Artein.
Measurements:
∙ Measurements Sheet: 300mm x 450mm.
∙ Thickness: 1.00mm.
Data:
∙ Resistant up to 120° Celcius.
∙…€ 5,95- Gasket paper 300mm x 450mm x 0.80mm Unreinforced Artein
Gasket paper 300mm x 450mm x 0.80mm Unreinforced Artein
∙ Gasketpaper.
∙ Unreinforced.
∙ Artein.
Measurements:
∙ Measurements Sheet: 300mm x 450mm.
∙ Thickness: 0.80mm.
Data:
∙ Resistant up to 120° Celcius.
∙…€ 5,50 - Gasket paper 300mm x 450mm x 0.50mm Unreinforced Artein
Gasket paper 300mm x 450mm x 0.50mm Unreinforced Artein
∙ Gasketpaper.
∙ Unreinforced.
∙ Artein.
Measurements:
∙ Measurements Sheet: 300mm x 450mm.
∙ Thickness: 0.50mm.
Data:
∙ Resistant up to 120° Celcius.
∙…€ 5,95 - Gasket paper 300mm x 450mm x 0.40mm Unreinforced Artein
Gasket paper 300mm x 450mm x 0.40mm Unreinforced Artein
∙ Gasketpaper.
∙ Unreinforced.
∙ Artein.
Measurements:
∙ Measurements Sheet: 300mm x 450mm.
∙ Thickness: 0.40mm.
Data:
∙ Resistant up to 120° Celcius.
∙…€ 4,95
