Clutch / Crankcase Cover NOS Original! Tomos 4L / APN-4 / AT50 / ATX50 / NTX50

∙ Clutchcover / Crankcasecover.
∙ NOS, Original Tomos part!

Suitable for:

∙ Tomos 4L.
∙ Tomos APN-4
∙ Tomos AT50.
∙ Tomos ATX50.
∙…

Clutch / Crankcase Cover Original! Puch N50 / M50 / Monza Grand Prix

∙ Clutchcover / Crankcasecover.
∙ Without inside part.
∙ N.O.S, Original Puch part!

Suitable for:

∙ Puch Monza.
∙ Puch Grand Prix.
∙ Puch M50
∙…

Clutch / Crankcase Cover Original! 4 Versnellingen Puch Condor X50-4 / Imola X / GX

∙ Clutchcover / Crankcasecover.
∙ With inside part.
∙ N.O.S, Original Puch part!

Suitable for:

4 Gear Engines

∙ Puch Condor X50-4.
∙…

Clutch / Crankcase Cover Original! 4 Versnellingen Puch Condor X50-4 / Imola X / GX

∙ Clutchcover / Crankcasecover.
∙ Bare.
∙ N.O.S, Original Puch part!

Suitable for:

4 Gear Engines

∙ Puch Condor X50-4.
∙ Puch Imola…

Clutch / Crankcase Cover Original! Tomos 2L / 2E

∙ Clutchcover / Crankcasecover.
∙ Model for dipstick with plastic top.
∙ N.O.S, Original Puch part!

Suitable for:

∙ Tomos 2L.
∙ Tomos 2E.

Original Tomos article number

202.701

Clutch / Crankcase Cover Original! Tomos 3L / 3E

∙ Clutchcover / Crankcasecover.
∙ Model for dipstick with plastic top.
∙ N.O.S, Original Puch part!

Suitable for:

∙ Tomos 3L.
∙ Tomos 3E.

Original Tomos article number

202.707

Spacer Crank lid M6 x 50mm Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Spacer bolt.
∙ Placed behind the crank lid.

Measurements:

∙ Total length: 50mm.
∙ Length head: 14mm.
∙ Length thin part: 36mm.
∙ Screw thread:…

Spacer Crank lid M6 x 81mm Puch Monza / N50

∙ Spacer bolt.
∙ Placed behind the crank lid.

Measurements:

∙ Total length: 81mm.
∙ Length head: 47mm.
∙ Length thin part: 34mm.
∙ Screw thread: M6.

Suitable for:

∙…

Spacer Crank lid M6 - M5 x 90mm Puch MV / VS / MS / Florida

∙ Spacer bolt.
∙ Placed behind the crank lid.

Measurements:

∙ Total length: 90mm.
∙ Length head: 56mm.
∙ Length thin part: 34mm.
∙ Screw thread: M6 /…

Gear Pedal Steel Chromed Puch MV50 / VZ50 / MC50 / Florida

∙ Gearpedal.
∙ Steel.
∙ Heavy qaulity!
∙ Chromed.

Measurements:

∙ Diameter mounting hole: 14mm.
∙ Length: -

Suitable for:

2 & 3 Gear Models.

∙ Puch…

Gear Pedal as Original Puch MV50 / VZ50 / MC50 / Florida

∙ Gearpedal.
∙ Model as original.
∙ Aluminium.
∙ Note! may contain minor damage.

Measurements:

∙ Diameter mounting hole: 13mm / 14mm.
∙ Length: 120mm -…

Gear Pedal as Original Puch MV50 / VZ50 / MC50 / Florida

∙ Gearpedal.
∙ Model as Original.
∙ Aluminium.
∙ Note! may contain minor damage.

Measurements:

∙ Diameter mounting hole: 13mm.
∙ Length: 120mm -…

Gear Pedal Puch Monza / Grand prix / M50 Racing

∙ Gearpedal.
∙ Aluminium.

Suitable for:​

4 Gear Footgear Engines.

∙ Puch Monza.
∙ Puch Grand prix.
∙ Puch M50 Racing.

Gear Pedal 2 / 3 Gear Foor Shift Puch

∙ Gear pedal.

Suitable for:

2 & 3 Gear Foot shift Engines.

∙ Puch Models.

Gear Pedal Original! Puch 6 Gears / MV50-X2 / X50-4

∙ Gearpedal.
∙ Model with tapered fit on the axle.
∙ NOS Original Puch part!

Suitable for:

Puch 6-Gear & Later Puch 2 & 4 Gear.

∙ Puch MV50-X2.
∙ Puch…

Gear Pedal Tomos 4L / AT50 / ATX50 / NTX50

∙ Gear / Shift pedal.

Suitable for:

∙ Tomos 4L (Newer models)
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.
∙ Enzov.

Identical to Puch article number

211.888 Replacmenet for 205.813

O-Ring Axle Gear Pedal 17.3mm x 2.4mm Puch 4 Gears

∙ O Ring Gearpedal axle.
∙ Placed behind the gearpedal.

Measurements:

∙ 17.3mm x 2.4mm.

Suitable for:

Puch 4 Gear Models.

∙ Puch VZ50-4.
∙ Puch DS50-4.
∙ Puch…

Rubber Gear Pedal Black with Logo Puch Footgear

∙ Rubber gearpedal.
∙ Black.
∙ With Puch logo.

Suitable for:

Puch Models with Footgear.

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch Monza.
∙ Puch Ranger.
∙…

Rubber Gear Pedal Black Remake Puch Footgear

∙ Rubber gearpedal.
∙ Black.
∙ Remake.

Suitable for:

Puch Models with Footgear.

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch Monza.
∙ Puch Ranger.
∙ Etc.

Key Kickstartpedal 9mm x 63mm Puch DS / VZ / R / M / SE / MC125 / MC175 / Etc

∙ Kickstartkey / Key kickstart pedal.
∙ For engines with kickstart stop to the outside

Measurements:

∙ Diameter: 9mm.
∙ Length: 63mm.
∙…

Mounting set Cooling cap Engine Puch MV / MS / VS / DS / VZ / Etc

∙ Mountingset for Coolingcap.
∙ As Original.
∙ Including manual!

Suitable for:

Motdels with Forced cooling from ± 1965

∙ Puch DS50.
∙ Puch…

Mounting set Shift housing Puch MV / MS / VZ / MC

∙ Mountingset shifthousing.
∙ Complete set.

Complete set with:

∙ 4x Mounting Studs.
∙ 4x Mounting Nuts.
∙ 4x Mounting Rings.

Suitable for:

2 and 3 Gear Footgear…

Switch Wheel Puch 3 Gears Handgear

∙ Switchwheel.
∙ For mounting the Shift cables.
∙ System with a continuous cable with a central lead.

Suitable for:

∙ Puch 3 Gears Handgear.

Identical to Puch article number

361.1.14.017.8

Switch Wheel Tomos / Puch 3 Gears Handgear

∙ Switchwheel.
∙ For the mounting of the shift cable.
∙ System with 2 separate cables.

Suitable for:

∙ Puch 3 Gears Handgear (the cable out of 1 piece is then replaced by 2…

Circlip Housing / Gearbox 35mm Tomos / Puch / Universal

∙ Housing circlip.
∙ Model: 45mm.
∙ DIN 472.
∙ A Piece.

Measurements:

∙ Outer / Build-in diameter: 45mm.
∙ Thickness: -mm.

Suitable for:

∙ Puch Models…

Hand Gear Lever set Hand Shift Tomos / Puch 2 Gear

∙ Hand gear lever set.
∙ Conversion set accessory from the 1960s to convert a Puch or Tomos with 2 gears to a "hand lever" gear.
∙ N.O.S, New Old Stock Original Puch…

Shift Lever Pedal Gear set Hand Shift -> Foot Shift Puch / Tomos 2 Gears

∙ Shift lever pedal gear set.
∙ Set to convert hand shift engines to foot shift.
∙ Stainless steel.

Complete set with:

∙ 1x Shift lever.
∙ 1x…

Shift Lever Pedal Gear Hand Shift -> Foot Shift Puch / Tomos 2 Gears

∙ Shift lever pedal gear.
∙ Set to convert hand shift engines to foot shift.
∙ Stainless steel.

Suitable for:

∙ Puch 2 Gear Models.
∙ Tomos 2 Gear Models.

Spoke set Shift Lever Pedal Gear Puch / Tomos 2 Gears

∙ Spoke set.
∙ Suitable for Shift lever Pedal gear.
∙ For the connection between the Shift lever and the select fork.

Complete set wit:

∙ 1x Spoke.
∙ 2x…

Rubber Shift Lever Pedal Gear Puch / Tomos 2 Gears

∙ Rubber.
∙ Suitable for Shift lever pedal gear.

Suitable for:

∙ Puch 2 Gear Models.
∙ Tomos 2 Gear Models.

Hub Kickstart Pedal Left Puch DS50 / VS50DZ / MC50 / VZ50

∙ Hub kickstartpedal.
∙ For mounting on the Leftside.

Suitable for:

∙ Puch DS50.
∙ Puch VS50DZ.
∙ Puch MC50.
∙ Puch VZ50.

Identical to Puch article…

Hub Kickstart Pedal Left Tomos APN / ATX / AT

∙ Hub kickstartpedal.
∙ For mounting on the Leftside.

Suitable for:

∙ Tomos APN.
∙ Tomos ATX.
∙ Tomos AT.

Stop set Kickstart Spring Tomos 4L / APN4 / APN6 / AT50 / ATX / NTX / A35 / Etc

∙ Stop set kickstart spring.

Suitable for:

∙ Tomos 4L.
∙ Tomos APN4.
∙ Tomos APN6.
∙ Tomos ATX.
∙ Tomos NTX.
∙ Tomos A35.
∙ Etc.

Nock Catch Bracket Kickstart Spring Tomos 4L / APN4 / APN6 / AT50 / ATX / NTX / A35 / Etc

∙ Cam for placement on the kickstart spring catch bracket.

Suitable for:

∙ Tomos 4L.
∙ Tomos APN4.
∙ Tomos APN6.
∙ Tomos…

Bracket Kickstart Spring Tomos 4L / APN4 / APN6 / AT50 / ATX / NTX / Etc

∙ Kickstart spring catch bracket.

Suitable for:

∙ Tomos 4L.
∙ Tomos APN4.
∙ Tomos APN6.
∙ Tomos ATX.
∙ Tomos NTX.
∙ Etc.

Original Tomos…

Centering Cap Clutch Tomos 4L / 4E / Sprint / AT50 / AT50 / AT50X / NTX50 / Etc

∙ Centering cap / Ball nut / Cap nut clutch.

Suitable for:

4 / 5 Gear Models.

∙ Tomos 4L.
∙ Tomos 4E.
∙ Tomos Sprint.
∙ Tomos AT50.
∙…

Guide Disk Kickstartspring Puch DS / MC / VZ

∙ Guidedisk kickstart spring.
∙ Suitable for kickstart spring article number: 364.1.13.334.1

Suitable for:

∙ Puch DS.
∙ Puch MC.
∙ Puch VZ.

Identical to Puch article…

Locking Plate Drive Shaft Puch MV / MS / DS / VS / VZ / Etc

∙ Locking plate drive shaft.

Suitable for:

Puch Models with 3 Gears.

∙ Puch MS.
∙ Puch MV.
∙ Puch DS.
∙ Puch VS.
∙ Puch VZ.
∙ Puch MC.
∙ Etc.

Chain transmission / Drive 26 Links Puch Monza Grand Prix

∙ Primary transmission / drive chain.
∙ 26 Links.

Suitable for:

∙ Puch Monza, 4 Gears.
∙ Puch Grand Prix, 4 Gears.

Bearing bushing Start Sprocket Aluminium Tomos / Puch 2 / 3 Gears

∙ Bearingbush.
∙ For the start sprocket.
∙ Aluminium.

Measurements:

∙ Outer diameter: 19mm.
∙ Inner diameter: 14mm.
∙ Height: 9.5mm.

Suitable…

Brake Lever Driver set New Model Tomos / Puch 2 / 3 Gear

∙ Brake lever driver set.

Complete set with:

∙ Brake lever (Used)
∙ Locking nipple.
∙ Circlip.
∙ Locking ring.

Suitable for:

∙ Puch / Tomos New Model 2 & 3…

Brake Lever Driver set Old Model Tomos / Puch 2 / 3 Gear

∙ Brake lever driver set.

Complete set with:

∙ Brake lever (Used)
∙ Locking nipple.
∙ Circlip.
∙ Locking ring.

Suitable for:

∙ Puch / Tomos Old Model 2 & 3…

Driver Lever Shift Mechaniscm Vertical Puch 2 / 3 Gears

∙ Driverlever.
∙ For Puch Shiftmechanism with vertical elongated opening.

Suitable for:

∙ Puch MV50 2 Gears Footgear.
∙ Puch MV50 3 Gears Footgear.

Driver Lever Shift Mechaniscm Horizontal Puch 2 / 3 Gears

∙ Driverlever.
∙ For Puch Shiftmechanism with horizontal elongated opening.

Suitable for:

∙ Puch MV50 2 Gears Footgear.
∙ Puch MV50 3 Gears Footgear.

Locking Ring Brake Lever Driver 2mm x 30mm Tomos / Puch 2 / 3 Gear

∙ Locking ring / spring ring brake lever driver.
∙ 2mm x 30mm.

Suitable for:

∙ Puch / Tomos 2 & 3 Gear Engines.

Identical to Original Article number

900.3221

Nipple + Circlip Brake Lever Driver Tomos / Puch 2 / 3 Gear

∙ Nipple + circlip brake lever driver.
∙ Diameter: 10mm x Lengte: 23mm.

Suitable for:

∙ Puch / Tomos 2 & 3 Gear Engines.

Identical to Original Article…

Rubber Seal Gear Fork - Wheel 2 / 3 Gear Puch

∙ Rubber seal gear fork / wheel.

Suitable for:

2 / 3 Gear engines.

∙ Puch Gear Models.

Securing plate Between axle Puch 2 / 4 Gear

∙ Securingplate between axle.

Suitable for:

∙ Puch 4 Gear.
∙ Puch 2 Gear (Scandinavia model)

Original Puch article number

350.1.12.613.1 / 000P3966

Securing plate Primary Sprocket 12mm New Model Tomos / Puch 2 / 3 Gears

∙ Securingplate primary sprocket.
∙ For the nut of the primary gear. (Sprocket with increased ridge)

Measurements:

∙ Outer diameter: 25mm.
∙ Inner…

Mounting plate + Catch Bracket for Shift Cable 3 Gears Tomos / Puch

∙ Mountingplate / Baseplate + Catch bracket.
∙ Mounting plate with catch bracket for the shift cable's at the bottom of the engine.

Suitable for:

3 Gear…

Mounting plate for Shift cable 3 Gears Tomos / Puch

∙ Mountingplate / Baseplate.
∙ Mounting plate for the 2 catch brackets of the shift cable's at the bottom of the engine.
∙ Bare plate, without catch brackets.

Suitable…

Mounting plate for Shift cable 2 Gears Tomos / Puch

∙ Mountingplate / Baseplate.
∙ Mounting plate for the 2 catch brackets of the shift cable's at the bottom of the engine.
∙ Bare plate, without catch brackets.

Suitable…

​Adjustment Plate for Gear Cable 3 Gear Tomos / Puch

∙ Adjustment plate 3 gears.
∙ For adjusting the gear cable.
∙ A Piece.

Suitable for:

3 Gear Models.

∙ Puch Models.
∙ Tomos Models.

Original Puch article…

​Adjustment Plate for Gear Cable 2 Gear Tomos / Puch

∙ Adjustment plate 2 gears.
∙ For adjusting the gear cable.
∙ A Piece.

Suitable for:

2 Gear Models.

∙ Puch Models.
∙ Tomos Models.

Original Puch article number

050.1429

Mounting bracket Engine cover Plate Rearside with Nut Tomos 2L / 3L Puch MS / VS / Etc

∙ Mountingbracket rear engine coverplate.
∙ For Crankplate with high hole.
∙ Model with Nut.

Suitable for:

Models with 2 & 3…

Mounting bracket Engine cover Plate Rearside without Nut Tomos 2L / 3L Puch MS / VS / Etc

∙ Mountingbracket rear engine coverplate.
∙ For Crankplate with high hole.
∙ Model without Nut.

Suitable for:

Models with 2 & 3…

Bolt set Original Ignition M4 Crosshead 6-Pieces Puch

∙ Bolt set original ignition.
∙ For mounting an Original / Remake model ignition.
∙ Crosshead model.
∙ Screw thread: M4.
∙ 6 Pieces.

Suitable for:

∙ Puch Engines.

Bolt set Inner rotor Ignition M4 Crosshead 6-Pieces Puch

∙ Bolt set inner rotor ignition.
∙ For mounting an inner rotor ignition such as HPI, PVL, Selletra etc.
∙ Crosshead model.
∙ Screw thread: M4.
∙ 6…

Bolt set Ignition cover / Pullstarter M4 x 10mm Crosshead 4-Pieces Puch

∙ Bolt set ignition cover.
∙ For mounting the flywheel cover or pullstarter on the engine.
∙ Crosshead model.
∙ Screw thread: M4 x 10mm.
∙ 4…

Bolt set Engine Allen 34-Pieces Puch e50

∙ Bolt set Crank case / cylinderhead / manifold / exhaust.
∙ Allen model.
∙ 34 Pieces.

Complete set met:

∙ Allen bolts for the crank case.
∙ Locking nuts for the manifold.
∙…

Bolt set Crank case - Clutch cover - Fywheel cover Tomos 4L

∙ Bolt set for crankcase - clutch cover - flywheel cover.

Complete set with:

Crankcase set:

∙ 2x M6x40mm (With nut and washers, hexagon bolt)
∙ 3x M6x50mm…

Bolt set Crank case Tomos 4L

∙ Bolt set for crankcase.

Complete set with:

∙ 2x M6x40mm (With nut and washers, hexagon bolt)
∙ 3x M6x50mm (Cylinder head bolt with slotted head)
∙ 3x M6x60mm (Cylinder head bolt with…

Bolt set Cooling cap - Fywheel cover Tomos 4L

∙ Bolt set for cooling cap - flywheel cover.

Complete set with:

∙ 2x M6x50mm (Cylinder head bolt with slotted head)
∙ 2x M7x16mm (Hexagon bolt)

Suitable for:

∙ Tomos 4L Models.

Bolt set Clutch cover Tomos 4L

∙ Bolt set for clutch cover.

Complete set with:

∙ 2x M6x25mm (Cylinder head bolt with slotted head)
∙ 4x M6x30mm (Cylinder head bolt with slotted head)

Suitable for:

∙ Tomos 4L Models.

Clutch Axle set Complete New Model Tomos 4L

∙ Clutchaxle set.
∙ New model.
∙ Complete set.

Suitable for:

∙ Tomos 4L.
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.
∙ Etc.

Original Article number

211.811

Clutch Axle New Model Tomos 4L

∙ Clutchaxle.
∙ New model.

Suitable for:

∙ Tomos 4L.
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.
∙ Etc.

Original Article number

211.812

Clutch Crown Nut M8 Tomos 4L

∙ Clutch crown / adjustement nut.
∙ Left hand screw thread (M8)

Suitable for:

Tomos 4 & 5 Gear models from 1974.

∙ Tomos 4L.
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.
∙…

Pressure Spring Clutch Arm Tomos 4L

∙ Pressure Spring clutch arm.
∙ 30mm x 7mm.

Suitable for:

∙ Tomos 4L.
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.
∙ Etc.

Original Article number

205.914

Gear Axle Puch 3 Gears Footgear

∙ Gearaxle.
∙ Footgear.

Suitable for:

3 Gear Engines.

∙ Puch DS (Alabama)

Gearshift shaft with Select fork 2 Gears Tomos 2L / Puch MV / VS / MS / VZ / Etc

∙ Gearshift Shaft.
∙ Complete with Select fork and replacement bush for the Shifter cable.

Suitable for:

2 Gear Models.

∙ Puch VS50L.
∙…

Gearshift shaft with Select fork Bare 2 Gears Tomos 2L / Puch MV / VS / MS / VZ / Etc

∙ Gearshift Shaft.
∙ Without bush for the Shifter cable.

Suitable for:

2 Gear Models.

∙ Puch VS50L.
∙ Puch MS50(L).
∙ Puch…

Gear Axle 2 / 3 Gear Foot Shift Puch

∙ Gear / Shift axle.

Suitable for:

2 / 3 Gear Foot shift Engines.

∙ Puch Skytrack.
∙ Puch MV50.
∙ Etc.

Lever 3 Gear Foot Shift Puch

∙ Lever.

Suitable for:

3 Gear Foot shift Engines.

∙ Puch Skytrack.
∙ Puch MV50.
∙ Etc.

Lever 2 Gear Foot Shift Puch

∙ Lever.

Suitable for:

2 Gear Foot shift Engines.

∙ Puch Skytrack.
∙ Puch MV50.
∙ Etc.

Latch + Notch Pin 3 Gear Foot Shift Puch

∙ Foot switch latch + notch pin.

Suitable for:

3 Gear Foor shift Engines.

∙ Puch Skytrack.
∙ Puch MV50.
∙ Etc.

Shift Lock Pawl 2 Gear Foot Shift Puch

∙ Shift lock pawl / Locking pin.
∙ To be used with Compression Spring 7.5-40-1.10.

Measurements:

∙ Thickness: 10.5mm.
∙ Height: 22.5mm.

Suitable for:

2 Gear Foot shift…

Shift Lock Stop 2 Gear Foot Shift Puch

∙ Shift lock pawl / Locking pin holder.
∙ To be used with Compression Spring 7.5-40-1.10.

Measurements:

∙ Key width: 17mm.
∙ Screw thread: M12 x 1mm.

Suitable for:

2 Gear Foot…

Spring Shift Lock 2 Gear Foot Shift Puch

∙ Shift lock stop spring / Locking pin holder spring.
∙ Compression spring 7.5-40-1.10.

Suitable for:

2 Gear Foot shift Engines.

∙ Puch Skytrack.
∙ Puch MV50.
∙ Etc.

Gear Spring 3 / 4 Gear Puch MV / MS / VZ / M50 / Monza

∙ Gearspring.

Suitable for:

3 / 4 Gear Engines.

∙ Puch MV.
∙ Puch MS.
∙ Puch VZ.
∙ Puch M50.
∙ Puch Monza.

Identical to Puch article number
329.1.14.016.1

Locking Ring Pedal Axle 17mm Tomos / Puch 2 / 3 Gear

∙ Locking ring / spring ring pedal axle.
∙ Secured in the catch ring.
∙ Diameter: 17mm.

Suitable for:

∙ Puch / Tomos 2 & 3 Gear Models (Old Models)

Identical to…

Dipstick New Model Tomos 4L / AT50 / ATX50 / NTX50 / Etc

∙ Dip stick.
∙ New model.
∙ Length metal piece: 6.5cm.

Suitable for:

Latest Tomos 4 Gear Models with fixed crankshaft bearings.

∙ Tomos 4L.
∙ Tomos AT50.
∙…

Dipstick Old Model Tomos 4L

∙ Dip stick.
∙ Old model.
∙ Length metal piece: 6cm.

Suitable for:

∙ Tomos 4L (Latest Models)

Dipstick Long Model Tomos 4L

∙ Dip stick.
∙ Long model.
∙ Length metal piece: 8cm.

Suitable for:

∙ Tomos 4L (1969 - 1970 Models)

Bearing Gear Housing 6203-Z New Model Tomos 4L

∙ Ball bearing gear house.
∙ SKF Bearing 6203Z, 17/40/12.

Suitable for:

∙ Tomos 4L (Newer Models)

Original Article number

044.226

Bearing Gear Housing 6003-Z Old Model Model Tomos 4L

∙ Ball bearing gear house.
∙ SKF Bearing 6003Z, 17/35/10.

Suitable for:

∙ Tomos 4L (Older Models)

Original Article number

035.034

Clutch Nut Left hand Thread M14 x 1mm Tomos 4L

∙ Clutchnut.
∙ Left hand screw thread (M14 x 1mm / KW22)

Suitable for:

∙ Tomos 4L.
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.
∙ Etc.

Original Article number

205.621

Clutch Nut Left hand Screw Thread M8 Tomos 4L

∙ Clutchnut.
∙ Old model.
∙ Left hand screw thread (M8)

Suitable for:

∙ Tomos 4L.
∙ Tomos Sprint.
∙ Enzov.

Original Article number

044.322

Shift Segment set Puch 3 Gears Handgear

∙ Shift segment set.

Complete set with:

∙ Switch axle.
∙ Tension pin.
∙ Switch segment.

Suitable for:

∙ Puch 3 Gears Handgear models.

Identical to Puch article…

Shift Segment Puch 3 Gears Handgear

∙ Shift segment.

Suitable for:

∙ Puch 3 Gears Handgear models.

Identical to Puch article number

360.1.14.003.1

Axle for Shift Segment Puch 3 Gears Handgear

∙ Axle for shift segment set.

Suitable for:

∙ Puch 3 Gears Handgear models.

Identical to Puch article number

360.1.14.002.1

Tension Pin for Shift Segment Puch 3 Gears Handgear

∙ Tension pin for shift segment.

Suitable for:

∙ Puch 3 Gears Handgear models.

Identical to Puch article number

900.4813

Grommet Ignition External Coil 2 Holes Puch Maxi e50

∙ Cable grommet.
∙ Model with 2 holes for external coil ignition.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Engines.

Grommet Ignition Internal Coil 6 Holes Puch Maxi e50

∙ Cable grommet.
∙ Model with 6 holes for internal coil ignition.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Engines.

Grommet Ignition 5 Holes Tomos / Puch 2 / 3 / 4 Gears

∙ Cable grommet.
∙ Model with 5 holes.
∙ A Piece.

Suitable for:

Puch 2, 3 & 4 Gear Models.

∙ Puch MS.
∙ Puch MV.
∙ Puch DS.
∙ Puch Monza.
∙ Puch N50.
∙…

Grommet Ignition 3 Holes Tomos / Puch 2 / 3 / 4 Gears

∙ Cable grommet.
∙ Model with 3 holes.
∙ A Piece.

Suitable for:

Puch 2, 3 & 4 Gear Models.

∙ Puch MS.
∙ Puch MV.
∙ Puch DS.
∙ Puch Monza.
∙ Puch N50.
∙…

E10 Fuel Fighter Fuel addition Putoline 250ML

∙ Putoline E10 Fuel Fighter
∙ 250ML
∙ Fuel addition to protect the fuel system from the harmful effects of E10 fuels, which are 10% bioethanol.

Characteristics:

∙ Protects…

ATF Clutch-oil Eurol 1 Liter Puch Maxi / X30 / Universal

∙ ATF Koppelings-oil.
∙ Oil for automatic clutch.
∙ ATF llD.
∙ 1 Liter.
∙ Eurol.

Suitable for:

∙ Puch Maxi e50 engines.
∙ Universal to use for various moped models.

ATF engine oil Valvoline Heavy Duty Pro 1 Liter Universal

∙ ATF engine oil for Puch e50 engines.
∙ 1 Liter.
∙ Heavy duty Pro!
∙ Valvoline.

ATF engine oil Putoline 1 Liter Universal

∙ ATF engine oil for Puch e50 engines.
∙ 1 Liter.
∙ Putoline.

Clutch oil Castrol Transmax -Z Race engines 1 Liter

∙ Clutch oil.
∙ Castrol Transmax-Z.
∙ Suitable for Race/Cross engines.
∙ Best choice for high RPM engines.
∙ High-Qaility!
∙ 1 Liter.

2 Stroke oil Castrol Power XR77 For Race engines (1 Liter)

∙ 2-Stroke oil.
∙ Castrol Power XR77.
∙ Suitable for Race engines.
∙ Fully synthetic oil that a strong protective lubrication film offers against mechanical and…

2 Stroke oil Castrol Power RS TTS 1 Liter Universal

∙ 2-Stroke oil.
∙ Castrol Power RS TTS.
∙ Fully synthetic oil that a strong protective lubrication film offers against mechanical and thermal stress.
∙ 1…

2 Stroke oil Eurol TTX 1 Liter Universal

∙ 2-Stroke oil.
∙ Topproduct.
∙ 1 liter.
∙ Synthetic 2-stroke oil for small air and water cooled 2-stroke engines
∙ Eurol TTX ProScoot is a top quality synthetic 2-stroke oil for…

2 Stroke oil SAE 50 (1 Liter) Puch Motorcycle

∙ SAE 50 2 Stroke oil.
∙ The flash point is extremely low so there is no/little smoke development.
∙ The clutch neither sticks or slips.
∙ The oil can also be used as front…

2 Stroke Oil Yamalube S2 1 Liter Universal

∙ 2-Stroke oil.
∙ Yamalube S2.
∙ 1 Liter.
∙ Semi-synthetic oil for 2-stroke engines.
∙ Provides a protective lubricating film against mechanical and thermal stress.
∙ With…

Gear oil Eurol 350ML (Z50 engine)∙ Gear oil
∙ Suitable for all Manual or foot gear engines (Z50 engine)
∙ 350ML.
∙ Eurol.

Engine oil change set Puch Maxi (250ml)

∙ Engine oil change set for Puch Maxi e50 engine.

Complete set with:

∙ ATF llD engine oil Eurol (250ml)
∙ Oil fill bolt.
∙ Fiber washer oil fill bolt.
∙ Oil drain bolt.
∙…

ATF engine oil Eurol (250ml)

∙ ATF oil For Puch e50 engines.
∙ 250ml.

2-Stroke oil Small on the go Putoline TT Sport 125ML

∙ 2-Stroke Mixing oil.
∙ 2-Stroke oil.
∙ Small, Easy on the go.
∙ Capacity 125ML.
∙ Putoline TT Sport.

Data:

∙ Minimizes smoke development.
∙ Minimizes carbon…