Spark Plug Short Shaft NGK B7HS

Customers also bought

• 
  Spark Plug Short Shaft NGK B8HS

  Spark Plug Short Shaft NGK B8HS
  
  ∙ Sparkplug.
  ∙ NGK B8HS.
  ∙ Short shank.
  
  Suitable for:
  
  ∙ Universal to use on various moped models.
  ∙ Puch Models.

  € 3,⁵⁰

  Order
• 
  Spark Plug Short Shaft NGK B6HS

  Spark Plug Short Shaft NGK B6HS
  
  ∙ Sparkplug.
  ∙ NGK B6HS.
  ∙ Short shank.
  
  Suitable for:
  
  ∙ Universal to use on various moped models.
  ∙ Puch Models.

  € 2,⁹⁵

  Order
• 
  Cap Spark plug Black NGK LB01F Universal

  Cap Spark plug Black NGK LB01F Universal
  
  ∙ Sparkplug cap.
  ∙ Black.
  ∙ Waterproof.
  ∙ Resistor: 5 Kohm.
  ∙ NGK LB01F.
  
  Suitable for:
  
  ∙ Universal to use on various moped models.

  € 4,⁵⁰

  Order
• 
  VEC TV-2E electronic ignition coil Puch / Etc

  VEC TV-2E electronic ignition coil Puch / Etc
  
  ∙ VEC TV-2E electronic ignition coil.
  ∙ Suitable for 6v en 12v.
  ∙ Start rpm 400, max rpm 10000.
  ∙ Suitable for left- and right turning engines
  ∙ Replaces ignition coil,…

  € 129,⁹⁵

  Order
• 
  Flywheel Nut M10 x 1.0mm WW17 Puch

  Flywheel Nut M10 x 1.0mm WW17 Puch
  
  ∙ Flywheelnut.
  ∙ M10 x 1.0mm.
  ∙ Wrench width: 17mm, Larger nut as normal.
  ∙ A Piece.
  
  Suitable for:​
  
  ∙ Zundapp Models.
  ∙ Puch Models.

  € 0,⁶⁵

  Order
• 
  Front fork mounting set Puch Maxi S / N / P / K / X30 / Rider Macho / P1 / Z-Two / Etc

  Front fork mounting set Puch Maxi S / N / P / K / X30 / Rider Macho / P1 / Z-Two / Etc
  
  ∙ Front fork / headset assembly set.
  ∙ Mounting set required for mounting the front fork in the frame.
  
  Complete set with:
  
  ∙ 2x Bearing…

  € 7,⁹⁵

  Order
• 
  Condenser Screw Model Bosch Puch

  Condenser Screw Model Bosch Puch
  
  ∙ Condenser ignition.
  ∙ Screw / nut connection.
  ∙ Model as Bosch.
  
  Measurements:
  
  ∙ Diameter: 18mm.
  ∙ Height: 22mm.
  
  Suitable for:
  
  ∙ Puch Models.
  ∙ Zündapp Models.
  ∙ Kreidler Models.

  € 2,⁵⁰

  Order
• 
  Base Gasket 1.0mm Puch Maxi

  Base Gasket 1.0mm Puch Maxi
  
  ∙ Base Gasket / Feet gasket.
  ∙ Suitable for 50cc > 70cc Cylinder.
  ∙ Thickness: 1.0mm.
  
  Suitable for:
  
  ∙ Puch e50 Engines.
  ∙ Puch ZA50 Engines.
  ∙ Puch Z50 Engines.
  ∙ Puch 2, 3 & 4 Gear Engines.
  ∙ Etc.

  € 1,⁷⁵

  Order
• 
  Pressure Plate set Clutch Kickstart Complete Puch e50

  Pressure Plate set Clutch Kickstart Complete Puch e50
  
  ∙ Pressure plate set.
  ∙ Complete set that is mounted on the clutch of a Puch e50 kickstart engine.
  
  Complete set met:
  
  ∙ Pressure plate.
  ∙ Sprocket.
  ∙ Spring…

  € 43,⁵⁰

  Order
• 
  Flywheel puller M22 X 1.5 / M26 X 1.5 Original / Kokusan Ignition

  Flywheel puller M22 X 1.5 / M26 X 1.5 original / Kokusan Ignition
  
  ∙ Flywheel puller.
  ∙ M22 X 1.5 / M26 X 1.5.
  ∙ For original ignition and kokusan flywheel.

  € 5,⁹⁵

  Order