Cover plate clutch shaft (Puch 2/3 gear)

∙ Cover plate for clutch shaft.
∙ Plastic.
∙ For Puch 2 and 3 gear engines.

Suitable for:

∙ Puch VS50.
∙ Puch MS50V.
∙ Puch DS50.
∙ Puch MV50.
∙ Puch X50 (2 and 3…

Centering cap plastic (Latest models Puch 2/3/4 gear)

∙ Centering cap.
∙ Plastic.
∙ For the lastest models Puch 2 and 3 gear engines.
∙ Not for the older models!

Suitable for:

∙ Puch MV50 (Latest models)
∙ Puch DS50…

Centering cap plastic A-Qaulity (Latest models Puch 2/3/4 gear)

∙ Centering cap.
∙ Plastic.
∙ A-Qaulity!
∙ For Puch 2 and 3 gear engines.
∙ Not for the older models!

Suitable for:

∙ Puch MV50 (Latest models)
∙…

Centering cap metal (Latest models Puch 2/3/4 gear)

∙ Centering cap.
∙ Metal.
∙ A-Qaulity!
∙ For the latest Puch 2 and 3 gear engines.
∙ Not for the older models!

Suitable for:

∙ Puch MS50L.
∙ Puch MS50V.
∙ Puch…

Clutch intermediate plates steel 6 pin (Puch 2/3/4 gear)

∙ Clutch intermediate plates.
∙ Model with 6 pins.
∙ Steel.
∙ 2 Pieces.

Suitable for:

∙ The most Puch 2 and 3 gear engines.
∙ The older Puch 4 gear engines.

Bearing bush clutch bell (Puch 2/3/4 gear)

∙ Bearing bush.
∙ For clutch bell.
∙ Precisely fitting!
∙ For Puch 2, 3 and 4 gear engines.
∙ Measurements:15x17x16,2mm.

Suitable for:

∙ Puch MS50(L).
∙ Puch MS50V.
∙…

Clutch shaft 75mm (Puch 2/3 gear)

∙ Clutch shaft.
∙ Length:75mm.
∙ For Puch 2 and 3 gear engines (Models until 1975)
∙ Original number:350.3.12.028.1
∙ To use with torsion spring small (Look related products…

Clutch shaft 85mm (Puch 2/3 gear)

∙ Clutch shaft.
∙ Length:85mm.
∙ For Puch 2 and 3 gear engines (Models before 1969)
∙ Original number:329.1.12.128.1.
∙ To use with torsion spring small (Look related products…

Torsion spring clutch shaft small (Puch 2/3 gear)

∙ Torsion spring clutch shaft.
∙ Small model.
∙ For older Puch 2 and 3 gear engines.
∙ Original number:050.1222

Suitable for:

∙ Puch MS50(L).
∙ Puch MS50V (Models…

Torsion spring clutch shaft big (Puch 2/3/4 gear)

∙ Torsion spring clutch shaft.
∙ Big model.
∙ Diameter spring:15mm.
∙ For Puch 2, 3 and 4 gear engines.
∙ Original number:350.3.12.022.1

Geschikt voor:

∙ Puch MS50V…

Circlip clucth shaft (Puch 2/3 gear)

∙ Circlip for clutch shaft.
∙ 6mm.
∙ For Puch 2 and 3 gear engines.
∙ To use with clutch shaft 75mm and 85mm (Look related products below)

Suitable for:

∙ Puch MS50(L).
∙ Puch…

Clutch lever Puch MV/VS/MS etc. (2/3 gear)∙ Clutch lever.
∙ For Puch 2 and 3 gear engines.

Suitable for:

∙ Puch MV50.
∙ Puch MS50(L).
∙ Puch MS50V.
∙ Puch VS50.
∙ Puch DS50.
∙ Puch VZ50.
∙ Puch M50Racing.
∙ Puch N50.
∙ Etc.

Clutch bell with primary drive gear (Puch 2/3 gear)

∙ Clutch bell with primary drive gear.
∙ Clutch bell:16 Teeth.
∙ Primary drive gear:58 Teeth.
∙ NOS (With some rust marks)
∙ For Puch 2 and 3 gear engines (Vanaf…

Spring holder clutch bell (Puch 2/3 gear)

∙ Spring holder clutch bell.
∙ Only for Puch 2 and 3 gear engines with 2-plate clutch!

Measurements:

∙ Total heigth:26mm.
∙ Heigth of wide profile:21,5mm.

Suitable for:

∙…

Clutch plates Surflex Original hardened Puch MV/VS/DS (2/3/4 gear)

∙ Clutch plates.
∙ For Puch 2, 3 and 4 gear engines.
∙ 2 Pieces.
∙ Original Puch.
∙ Hardened.
∙ Surflex.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.

Clutch plates Surflex Original Puch MV/VS/DS (2/3/4 gear)

∙ Clutch plates.
∙ For Puch 2, 3 and 4 gear engines.
∙ 2 Pieces.
∙ Original Puch.
∙ Surflex.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.

Clutch plate Puch MV/VS/DS (2/3/4 gear)

∙ Clutch plate.
∙ For Puch 2, 3 and 4 gear engines.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.

Clutch spring (Puch 2/3/4 gear)

∙ Clutch spring.
∙ 39mmx22mm.
∙ For Puch 2, 3 and 4 gear engines.

Suitable for:

∙ Puch MV50.
∙ Puch MS50(L)
∙ Puch MS50V.
∙ Puch VS50.
∙ Puch DS50.
∙ Puch VZ50.
∙ Puch…

Clutch spring strengthened +50% (Puch 2/3 gear)

∙ Clutch spring.
∙ Strengthened (+50%)
∙ For Tuned mopeds.
∙ For Puch 2 and 3 gear engines.

Suitable for:

∙ Puch MV50.
∙ Puch MS50(L)
∙ Puch MS50V.
∙ Puch…

Clutch spring Strengthened +70% (Puch 2/3 gear)

∙ Clutch spring.
∙ Strengthened (+70%)
∙ For tuned mopeds.
∙ For Puch 2 and 3 gear engines.

Suitable for:

∙ Puch MV50.
∙ Puch MS50(L)
∙ Puch MS50V.
∙ Puch…

Tension bearing clutch reinforced (Puch 4 gear)

∙ Tension bearing clutch.
∙ Reinforced version.
∙ For models with 3 clutch plates.
∙ For Puch 4 gear engines.

Suitable for:

∙ Puch 4 gear engines.
∙ Puch M125.
∙ Puch MC.

Locking plate clutch M8 (Puch 2/3 gear)

∙ Locking plate.
∙ For the M8x1 nut on the crankshaft to fix the clutch.
∙ Suitable for the older Puch 2 and 3 gear engines.
∙ Diameter:19.5mm.
∙ Original Puch…

Tension bearing clutch (Puch Z50/2/3 Gear)

∙ Tension bearing clutch.
∙ For Puch 2 and 3 gear engines.

Suitable for:

∙ Puch Z50.
∙ Puch MS.
∙ Puch VS.
∙ Puch MV.
∙ Puch VS50D.
∙ Puch DS50 (3 gear)
∙ Puch R50 (3…

Tension bearing clutch Reinforced (Puch Z50/2/3 Gear)

∙ Tension bearing clutch.
∙ Reinforced version.
∙ For models with 2 clutch plates.
∙ For Puch 2 and 3 gear engines.

Suitable for:

∙ Puch Z50.
∙ Puch MS.
∙ Puch…