Puch Z50 engine Parts
Here you find our engine parts for Puch Z50 engines.

  • Crankshaft Rito full round Puch MV/VS/Co/Z50 engine
    Crankshaft Rito full round Puch MV/VS/Co/Z50 engine

    Crankshaft Rito full round Puch MV/VS/Co/Z50 engine∙ Crankshaft.
    ∙ Complete with needlebearing.
    ∙ Fullround.
    ∙ Big-end:16mm.
    ∙ Piston pin:12mm.
    ∙ Top Qaulity!
    ∙ Rito.

    Suitable for:

    ∙ Puch Z50 engine (Only with…

    € 139,00
  • Crankshaft Top Racing (Z50 engine)
    Crankshaft Top Racing (Z50 engine)

    Crankshaft Top Racing (Z50 engine)∙ For Puch Z50/X30 engines (2 Speed Manual)
    ∙ Complete with needlebearing.
    ∙ Big-end:14mm.
    ∙ Piston pin:12mm.
    ∙ Top Racing.

    € 79,50
  • Bearing set complete (Z50 engine)
    Bearing set complete (Z50 engine)

    Bearing set complete (Z50 engine)∙ For Puch Z50 engine.
    ∙ All bearings included that are needed for the revion of a Z50 engine.
    ∙ NSK.

    Complete set with:

    ∙ 2x L17 Ball bearing A-Qaulity NSK.
    ∙ 1X 6202 Ball bearing A-Qaulity NSK.

    € 31,90
  • Crankshaft bearing L17 NSK (ZA50/Z50 engine)
    Crankshaft bearing L17 NSK (ZA50/Z50 engine)

    Crankshaft bearing L17 NSK (ZA50/Z50 engine)∙ Crankshaft bearing L17.
    ∙ A Piece.
    ∙ NSK.

    Suitable for:

    ∙ ZA50 engine.
    ∙ Z50 engine.

    € 14,90
  • Bearing 6202 NSK (Z50 engine)
    Bearing 6202 NSK (Z50 engine)

    Bearing 6202 NSK (Z50 engine)∙ For Puch Z50 engine.
    ∙ 6202 Bearing.
    ∙ Middle crankcase bearing.
    ∙ A-Qaulity.
    ∙ NSK.

    Measurements:

    ∙ Outer diameter:35mm.
    ∙ Inner diameter:15mm.
    ∙ Width:11mm.

    Suitable for:

    ∙ Puch Z50.

    € 5,50
  • Seal set Viton (Z50 engine)
    Seal set Viton (Z50 engine)

    Seal set Viton (Z50 engine)∙ Complete set.
    ∙ Viton.

    Complete set with:

    ∙ 1x Crankshaft seal right side 17/35/7.
    ∙ 1x Crankshaft seal left side 17/35/7.
    ∙ 1x Kickstart axle 16/28/7.
    ∙ 1x Shift pedal O-Ring…

    € 19,90
  • Seal set (Z50 engine)
    Seal set (Z50 engine)

    Seal set (Z50 engine)

    ∙ For Z50 engine.

    Complete set with:

    ∙ 1x Crankshaft seal right side 17/35/7
    ∙ 1x Crankshaft seal left side 17/35/7
    ∙ 1x Kickstart axle seal 16/28/7
    ∙ 1x Front sprocker seal 17/28/7

    € 9,95
  • Crankshaft seal set 17/35/7 Viton (Z50/MS/MV/VS/DS engine)
    Crankshaft seal set 17/35/7 Viton (Z50/MS/MV/VS/DS engine)

    Crankshaft seal set 17/35/7 Viton (Z50/MS/MV/VS/DS engine)

    ∙ 2x Crankshaft seal Left side and Right side 17/35/7.
    ∙ Viton.

    Suitable for:

    ∙ Z50 engine.
    ∙ MS engine.
    ∙ MV engine.
    ∙ VS engine.
    ∙ DS engine.

    € 14,90
  • Crankshaft seal 17x35x7 Viton (ZA50/Z50 engine)
    Crankshaft seal 17x35x7 Viton (ZA50/Z50 engine)

    Crankshaft seal 17x35x7 Viton (ZA50 engine)∙ For ZA50/Z50 engines.
    ∙ Crankshaft seal.
    ∙ 17x35x7.
    ∙ Viton.
    ∙ Extremely heat resistant.

    Suitable for:

    ∙ Crankshaft left and right side Z50 engine.
    ∙ Crankshaft left…

    € 6,50
  • Crankshaft seal 17x35x7 (ZA50/Z50 engine)
    Crankshaft seal 17x35x7 (ZA50/Z50 engine)

    Crankshaft seal 17x35x7 (ZA50/Z50 engine)∙ For ZA50/Z50 engines.
    ∙ 17x35x7.
    ∙ Double lip.
    ∙ Crankshaft seal.

    € 2,95
  • Crankshaft seal 20x35x7 (ZA50 engine)
    Crankshaft seal 20x35x7 (ZA50 engine)

    Crankshaft seal 20x35x7 (ZA50 engine)∙ For ZA50 engine.
    ∙ 20x35x7.
    ∙ Crankshaft seal.

    € 2,50
  • Kickstart axle seal 16x28x7 (Z50 engine)
    Kickstart axle seal 16x28x7 (Z50 engine)

    Kickstart axle seal 16x28x7 (Z50 engine)

    ∙ For Z50 engine.
    ∙ Kickstart axle seal.
    ∙ 16x28x7.

    € 2,90
  • Front sprocket axle seal 17x28x7 (Z50 engine)
    Front sprocket axle seal 17x28x7 (Z50 engine)

    Front sprocket axle seal 17x28x7 (Z50 engine)

    ∙ For Z50 engine.
    ∙ Front sprocket axle seal.
    ∙ 17x28x7.

    € 2,50
  • 15mm Manifold Puch X30 NS/NL (Z50 engine)
    15mm Manifold Puch X30 NS/NL (Z50 engine)

    15mm Manifold Puch X30 NS/NL (Z50 engine)

    ∙ For Puch X30 NS/NL with Z50 engine.
    ∙ Inlet:15mm.
    ∙ Connection diameter:20mm (Bing carburetors)
    ∙ Total height:71mm.

    € 13,90
  • 12mm Manifold Puch X30 NS/NL (Z50 engine)
    12mm Manifold Puch X30 NS/NL (Z50 engine)

    12mm Manifold Puch X30 NS/NL (Z50 engine)

    ∙ For Puch X30 NS/NL with Z50 engine.
    ∙ Inlet:12mm.
    ∙ Connection diameter:20mm (Bing carburetors)
    ∙ Total height:71mm.

    € 13,90
  • Kickstart pedal/lever (Z50/MV50/VS50/VZ50 engine)
    Kickstart pedal/lever (Z50/MV50/VS50/VZ50 engine)

    Kickstart pedal/lever (Z50/MV50/VS50/VZ50 engine)

    ∙ Kickstart pedal/lever.
    ∙ Chromed.

    Suitable for:

    ∙ Z50 engine.
    ∙ MV50 engine.
    ∙ VS50 engine
    ∙ VZ50 engine.

    € 42,95
  • Gearcable (Z50 engine)
    Gearcable (Z50 engine)

    Gearcable (Z50 engine)

    ∙ For ZA50 engine.
    ∙ Gearcable.
    ∙ Length inner cable:262cm.
    ∙ Length outer cable:2x103cm.

    € 15,90
  • Oil fill plug grey (ZA50/Z50 engine)
    Oil fill plug grey (ZA50/Z50 engine)

    Oil fill plug grey (ZA50/Z50 engine)

    ∙ For Puch ZA50/Z50/MV/VS/DS engine.
    ∙ Plastic/Rubber.
    ∙ Grey.

    € 1,25
  • Oil fill plug black (ZA50/Z50 engine)
    Oil fill plug black (ZA50/Z50 engine)

    Oil fill plug black (ZA50/Z50 engine)

    ∙ For Puch ZA50/Z50/MV/VS/DS engine.
    ∙ Plastic/Rubber.
    ∙ Black.

    € 1,50
  • Gasket kit complete (Z50 engine)
    Gasket kit complete (Z50 engine)

    Gasket kit complete (Z50 engine)

    ∙ For Z50 engine.
    ∙ Complete gasket kit.

    € 9,50
  • Clutch cover gasket (Z50 engine)
    Clutch cover gasket (Z50 engine)

    Clutch cover gasket (Z50 engine)∙ For Z50 engine.
    ∙ Clutch cover gasket.

    € 2,75
  • Clutch set reinforced +70% (Puch Z50 engine)
    Clutch set reinforced +70% (Puch Z50 engine)

    Clutch set reinforced +70% (Puch Z50 engine)

    ∙ Clutch set.
    ∙ Reinforced (+70%)
    ∙ Swiing.

    Suitable for:

    ∙ Puch Z50 engine.

    € 107,95
  • Clutch plate Surflex Original hardened (Z50 engine)
    Clutch plate Surflex Original hardened (Z50 engine)

    Clutch plate Surflex Original hardened (Z50 engine)

    ∙ For Z50/MV/VS/DS engine.
    ∙ Clutch plate.
    ∙ 2 Pieces.
    ∙ Original Puch.
    ∙ Hardened.
    ∙ Surflex.

    € 23,50
  • Clutch plate Surflex Original (Z50 engine)
    Clutch plate Surflex Original (Z50 engine)

    Clutch plate Surflex Original (Z50 engine)

    ∙ For Z50/MV/VS/DS engine.
    ∙ Clutch plate.
    ∙ 2 Pieces.
    ∙ Original Puch.
    ∙ Surflex.

    € 21,50
  • Clutch plate set (Puch Z50 engine)
    Clutch plate set (Puch Z50 engine)

    Clutch plate set (Puch Z50 engine)

    ∙ Clutch plate set.
    ∙ 2 Pieces.

    Suitable for:

    ∙ Puch Z50 engine.

    € 5,95
  • Clutch plate (Puch Z50 engine)
    Clutch plate (Puch Z50 engine)

    Clutch plate (Puch Z50 engine)

    ∙ Clutch plate.
    ∙ A Piece.

    Suitable for:

    ∙ Puch Z50 engine.

    € 2,99
  • Bearing bush clutch bell (Z50 engine)
    Bearing bush clutch bell (Z50 engine)

    Bearing bush clutch bell (Z50 engine)

    ∙ For Z50 engine.
    ∙ Brass.

    € 13,50
  • O-Ring clutch axle (Z50 engine)
    O-Ring clutch axle (Z50 engine)

    O-Ring clutch axle (Z50 engine)

    ∙ For Z50 engine.
    ∙ O-Ring for clutch axle.
    ∙ Thickness:2mm.

    € 1,25
  • Clutch spring (Z50 engine)
    Clutch spring (Z50 engine)

    Clutch spring (Z50 engine)

    ∙ Clutch spring.
    ∙ 39mmx22mm.

    Suitable for:

    ∙ Z50 engine.
    ∙ MV50 engine.
    ∙ MS50(L) engine.
    ∙ MS50V engine.
    ∙ VS50 engine.
    ∙ DS50 engine.
    ∙ VZ50 engine.
    ∙ MC50 engine.
    ∙ M50Racing…

    € 5,50
  • Clutch spring strengthened +50% (Z50 engine)
    Clutch spring strengthened +50% (Z50 engine)

    Clutch spring strengthened +50% (Z50 engine)

    ∙ Clutch spring.
    ∙ Strengthened (+50%)
    ∙ Suitable for Tuned engines.

    Suitable for:

    ∙ Z50 engine.
    ∙ MV50 engine.
    ∙ MS50(L) engine.
    ∙ MS50V engine.
    ∙ VS50 engine.
    ∙…

    € 21,95
  • Clutch spring strengthened +70% (Z50 engine)
    Clutch spring strengthened +70% (Z50 engine)

    Clutch spring strengthened +70% (Z50 engine)

    ∙ Clutch spring.
    ∙ Strengthened (+70%)
    ∙ Suitable for Tuned engines.

    Suitable for:

    ∙ Z50 engine.
    ∙ MV50 engine.
    ∙ MS50(L) engine.
    ∙ MS50V engine.
    ∙ VS50 engine.
    ∙…

    € 21,95
  • Tension bearing clutch (Puch Z50/2/3 Gear)
    Tension bearing clutch (Puch Z50/2/3 Gear)

    Tension bearing clutch (Puch Z50/2/3 Gear)

    ∙ Tension bearing clutch.
    ∙ For Puch 2 and 3 gear engines.

    Suitable for:

    ∙ Puch Z50.
    ∙ Puch MS.
    ∙ Puch VS.
    ∙ Puch MV.
    ∙ Puch VS50D.
    ∙ Puch DS50 (3 gear)
    ∙ Puch R50 (3…

    € 17,95
  • Tension bearing clutch Reinforced (Puch Z50/2/3 Gear)
    Tension bearing clutch Reinforced (Puch Z50/2/3 Gear)

    Tension bearing clutch Reinforced (Puch Z50/2/3 Gear)

    ∙ Tension bearing clutch.
    ∙ Reinforced version.
    ∙ For models with 2 clutch plates.
    ∙ For Puch 2 and 3 gear engines.

    Suitable for:

    ∙ Puch Z50.
    ∙ Puch MS.
    ∙ Puch…

    € 19,95
  • Spacer kickstart pedal (Z50 engine)
    Spacer kickstart pedal (Z50 engine)

    Spacer kickstart pedal (Z50 engine)∙ For Puch Z50 engine.
    ∙ Spacer for the kickstart pedal.
    ∙ Outer diameter:12mm.
    ∙ Inner diameter:10mm.
    ∙ Heigth:7.5mm.

    € 6,25
  • Clutch lever (Z50 engine)
    Clutch lever (Z50 engine)

    Clutch lever (Z50 engine)∙ Clutch lever.

    Suitable for:

    ∙ Z50 engine.
    ∙ MV50 engine.
    ∙ MS50(L) engine
    ∙ MS50V engine.
    ∙ VS50 engine.
    ∙ DS50 engine.
    ∙ VZ50 engine.
    ∙ M50Racing engine.
    ∙ N50 engine.

    € 8,95
  • Gear oil Eurol 350ML (Z50 engine)
    Gear oil Eurol 350ML (Z50 engine)

    Gear oil Eurol 350ML (Z50 engine)∙ Gear oil
    ∙ Suitable for all Manual or foot gear engines (Z50 engine)
    ∙ 350ML.
    ∙ Eurol.

    € 3,95
  • Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.1)
    Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.1)

    Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.1)

    ∙ 17x24x0.1
    ∙ For shimming crankshafts with L17 en BO17 bearings.
    ∙ A Piece.

    € 1,70
  • Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.2)
    Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.2)

    Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.2)

    ∙ 17x24x0.2
    ∙ For shimming crankshafts with L17 en BO17 bearings.
    ∙ A Piece.

    € 1,70
  • Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.3)
    Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.3)

    Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.3)

    ∙ 17x24x0.3
    ∙ For shimming crankshafts with L17 en BO17 bearings.
    ∙ A Piece.

    € 1,70
  • Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.5)
    Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.5)

    Shim washer for crankshaft with L17 and BO17 bearings (17x24x0.5)

    ∙ 17x24x0.5
    ∙ For shimming crankshafts with L17 en BO17 bearings.
    ∙ A Piece.

    € 1,70
  • Shim washer for crankshaft with L17 and BO17 bearings (17x24x1.0)
    Shim washer for crankshaft with L17 and BO17 bearings (17x24x1.0)

    Shim washer for crankshaft with L17 and BO17 bearings (17x24x1.0)

    ∙ 17x24x1.0
    ∙ For shimming crankshafts with L17 en BO17 bearings.
    ∙ A Piece.

    € 1,70
  • Shim washer for crankshaft with L17 and BO17 bearings (17x24x1.5)
    Shim washer for crankshaft with L17 and BO17 bearings (17x24x1.5)

    Shim washer for crankshaft with L17 and BO17 bearings (17x24x1.5)

    ∙ 17x24x1.5.
    ∙ For shimming crankshafts with L17 en BO17 bearings.
    ∙ A Piece.

    € 1,70
  • Bearing puller L17/E15 (Inner bearings)
    Bearing puller L17/E15 (Inner bearings)

    Bearing puller L17/E15 (Inner bearings)

    ∙ Bearing puller.
    ∙ For the bearings L17 and E15.
    ∙ For inner bearings.

    € 44,95
© 2018 - 2021 VDMPuchParts | sitemap | rss