Headset bearing set complete Puch Maxi N

∙ Headset bearing set.
∙ Complete set with all the parts you need for mounting the front fork in the frame.

Suitable for:

∙ Puch Maxi N.
∙ Models with a handlebar with a handle bar stem.

Front fork mounting set A-Qaulity! Buzzetti Puch Maxi S / N / P / K / X30 / Rider Macho / P1 / Z-Two / Etc

∙ Front fork / headset assembly set.
∙ Mounting set required for mounting the front fork in the frame.
∙…

Front fork mounting set Puch Maxi S / N / P / K / X30 / Rider Macho / P1 / Z-Two / Etc

∙ Front fork / headset assembly set.
∙ Mounting set required for mounting the front fork in the frame.

Complete set with:

∙ 2x Bearing…

Swiing Headset bearing set (Puch Maxi S/N/X30)

∙ For Puch Maxi S/N/X30.
∙ Swiing!
∙ Complete set.
∙ Hardened.
∙ Suitable for Race use.
∙ Top-Qaulity!
∙ Inner diameter lower bearing ring:26.8mm.
∙ Outer diameter of…

Balhead set Puch MV/MS/VS

∙ Balhead set.
∙ Complete set.
∙ 5mm ballbearings.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.

Headset bearing conversion kit (Honda fork>Puch frame)

∙ Complete conversion set to mount a Honda MB/MT/MBX/MTX front fork in a Puch Maxi frame (Ideal for a Race and Cross Puch)

Balhead ballbearing set Puch MV/MS/VS (144 Pieces)

∙ Balhoofd kogellager set.
∙ 144 Pieces.
∙ 5mm Ballbearings.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.

Headset bearing conversion bush set (Honda front fork>Puch frame)

∙ Headset bearing conversion bush set.
∙ Bush set to mount a Honda MB/MT/MBX/MTX front fork in a Puch Maxi frame.
∙ Ideal for a Raceor a Cross…

Headset cone mounting set

∙ Headset cone mounting set.
∙ To easily place place steering head cones.
∙ Set with various most used sizes.
∙ Mounting tool.

Headset nut (26mm Luxury Stainless steel)

∙ Luxury model.
∙ Diameter:26mm.
∙ Stainless steel.

Headset nut (26mm stainless steel)

∙ Headset nut.
∙ M26x1.
∙ Stainless steel.

Headset nut (26mm chrome)

∙ Headset nut.
∙ M26x1.
∙ ​Chrome.

Headset nut (26mm Puch Maxi N chrome)

∙ For Puch Maxi N.
∙ Diameter:26mm.
∙ Chrome.

Headset nut (26mm high chrome)

∙ Diameter:26 mm.
∙ High model (16mm)
∙ Chrome.

Headset nut (26mm Luxury chrome)

∙ Luxury model.
∙ Diameter:26mm.
∙ Chrome.

Steering head nut 26mm universal Puch MV/MS/VS/Maxi

∙ Steering head nut.
∙ Chrome.
∙ Diameter:26mm.
∙ Also for universal use.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Puch Maxi.

Headset cup Top side Puch MV / MS / VS / Etc

∙ Bearing / headset cup.
∙ Top side.
∙ Headset cup mounted in the frame for the assembly of the front fork.

Measurements:

∙ Outer diameter headset: 32.6mm.
∙ Inner diameter…

Headset cup Bottom side Puch MV / MS / VS / Etc

∙ Bearing / headset cup.
∙ Bottom side.
∙ Headset cup mounted in the frame for the assembly of the front fork.

Measurements:

∙ Outer diameter headset: 32.6mm.
∙ Inner…

Adjusting nut Headset M26x1 Puch MV / MS / VS / Etc

∙ Headset asjusting nut / headsetnut.
∙ With notches.
∙ Screw thread: M26x1.
∙ Placed over the headset bearing set top side.

Suitable for:

Puch Shift models.

∙ Puch…

Dust cover Headset Puch MV / MS / VS / Etc

∙ Headset dust cover.
∙ Placed over the headset bearing set top side.

Suitable for:

Puch Shift models.

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Tomos 2L.
∙ Tomos 3L.
∙ Tomos…

Ballhead ring (Vertical)

∙ Comes between the lower bearing shell and the front fork pin.

Ballhead bearing Buzetti (Puch Maxi S/N/X30)

∙ For Puch Maxi S/N/X30.
∙ Buzetti.
∙ Top-Qaulity.
∙ 26.5mm.

Shimring headset nut / crown plate 3.0mm

∙ Shimring.
∙ To use to fill up the space below the headset locking nut or the crown plate.
∙ VDM.

Measurements:

∙ Thickness: 3.0mm.
∙ Outer diameter: 38mm.
∙ Inner diameter: 26mm.

Shimring headset nut / crown plate 2.0mm

∙ Shimring.
∙ To use to fill up the space below the headset locking nut or the crown plate.
∙ VDM.

Measurements:

∙ Thickness: 2.0mm.
∙ Outer diameter: 38mm.
∙ Inner diameter: 26mm.

Shimring headset nut / crown plate 1.0mm

∙ Shimring.
∙ To use to fill up the space below the headset locking nut or the crown plate.
∙ VDM.

Measurements:

∙ Thickness: 1.0mm.
∙ Outer diameter: 38mm.
∙ Inner diameter: 26mm.

Shimring headset nut / crown plate 0.5mm

∙ Shimring.
∙ To use to fill up the space below the headset locking nut or the crown plate.
∙ VDM.

Measurements:

∙ Thickness: 0.5mm.
∙ Outer diameter: 38mm.
∙ Inner diameter: 26mm.

Crown plate O-Ring

∙ A Piece.
∙ This O-Ring comes between the upper crown plate and the ball head nut.

Steering lock 15mm Puch MS50 / VS50 / DS50

∙ Steering lock.
∙ Complete with 2 keys.

Measurements:

∙ Diameter lock: 15mm
∙ Total length: 25mm.

Suitable for:

Models from +/-1954 till +/-1966.

∙ Puch MS50.
∙ Puch…

Steering lock as original complete 12mm/8mm Puch Maxi/MV/Etc

∙ Steering lock.
∙ As original.
∙ Complete with spring and nail.
∙ Diameter:12mm with 8mm pin.
∙ With 2 golden keys with Puch logo.

Suitable for:

∙ Puch…

Steering lock 12mm A-Qaulity! complete Puch Maxi/MV/VS/Etc

∙ Steering lock/handlebar lock.
∙ A-Qaulity!
∙ Complete with spring, nail and cap.
∙ Diameter:12mm with 8mm pin.
∙ With 2 numbered keys.

Suitable for:

∙…

Steering lock 12mm Puch Maxi/MV/VS/Etc

∙ Steering lock.
∙ Diameter:12mm with 8mm pin.
∙ With 2 keys.

Suitable for:

∙ Puch Maxi.
∙ Puch MV.
∙ Puch VS.
∙ Etc.

Steering lock 12mm black key Puch Maxi/MV/VS/Etc

∙ Steering lock.
∙ Diameter:12mm with 8mm pin.
∙ With 2 black keys.

Suitable for:

∙ Puch Maxi.
∙ Puch MV.
∙ Puch VS.
∙ Etc.

Steering lock 10mm Puch Monza

∙ Steering lock.
∙ Diameter:10mm.
∙ With 2 keys.

Suitable for:

∙ Puch Monza.

Steering lock caps oval and round (Puch Maxi/MV/VS)

∙ For Puch Maxi/MV/VS etc.
∙ Set contains a round and oval cap.

Notch nail with ring for steering lock (Puch Maxi/MV/VS)

∙ Diameter pin:2.75mm.
∙ Diameter head:5mm.
∙ Length:10mm.

Notch nail steering lock Univeral / Puch Maxi / MV / Monza / Etc

∙ Notch nail steering lock

Measurements:

∙ Diameter stift: 2.50mm.
∙ Diameter head: 4.50mm.
∙ Length: 10mm.

Suitable for:

∙ Puch Maxi.
∙ Puch…

Spring steering lock Univeral / Puch Maxi / MV / Monza / Etc

∙ Spring steering lock

Suitable for:

∙ Puch Maxi.
∙ Puch Monza.
∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch VZ
∙ Puch Alabama.
∙ Puch Dakota.
∙ Puch…

Speedometer VDO replica 60km/h 48mm Puch Maxi/MV/Etc

∙ Speedometer.
∙ Black dial.
∙ Fits in all Puch Maxi headlights with a speedometer hole.
∙ VDO Connection.
∙ 60km/h.
∙ Diameter: 48mm.

Suitable for:

∙ Puch…

Speedometer VDO replica 100km/h 48mm

∙ Speedometer.
∙ VDO replica.
∙ 100km/h.
∙ Black / White Dail.
∙ Diameter: 48mm.

Speedometer VDO replica 60km/h 48mm

∙ Speedometer.
∙ VDO replica.
∙ 60km/h.
∙ Black / White Dail.
∙ Diameter: 48mm.

Speedometer white dial 80km/h 48mm

∙ Speedometer.
∙ White dial.
∙ Fits in all Puch Maxi headlights with a speedometer hole.
∙ VDO Connection.
∙ 80km/h.
∙ Diameter: 48mm.
∙ With BA7S light bulb fitting.

Speedometer black dial 100km/h 60mm

∙ Speedometer.
∙ Black dial.
∙ VDO connection.
∙ 100km/h.
∙ Diameter: 60mm.
∙ Universal.

Speedometer black dial 120km/h 60mm

∙ Speedometer.
∙ Black dial.
∙ VDO Connection.
∙ 120km/h.
∙ Diameter: 60mm.
∙ Universal.

Speedometer white universal with light 80 km/h 60mm

∙ Speedometer.
∙ VDO connection.
∙ 80Km/h.
∙ White.
∙ Diameter: 60mm.
∙ Universal.
∙ With light connection, without BA7 light bulb (You can use 6V or 12V)

Tachometer 60mm Puch Monza / Universal

∙ Tachometer.
∙ Replica Top-qaulity!
∙ 12 Volt 1.2 Watt light.
∙ Diameter: 60mm.
∙ This tachometer works only with standard Bosch ignitions 6 or 12 volts.

Instructions:

∙ Other…

Speedometer housing universal (60mm)

∙ Speedometer housing for 60mm Speedometers.
∙ Universal.
∙ Black.
∙ With mount.

Speedometer clamp 60mm (Black)

∙ For a 60mm speedometer.
∙ Black.

Mounting set headlight hooks front fork Puch VZ50 / M50

∙ Assembly set headlight hooks
∙ Set for mounting the headlight hooks on the front fork.

Suitable for:

∙ Puch VZ50.
∙ Puch M50.

Screw plug front fork M19.5x1 Puch MS50

∙ Screw plug front fork.
∙ M19.5x1.

Suitable for:

∙ Puch MS50 (Small front fork)

Shock absorber bush front 120mm Puch MS50

∙ Shock absorber bush.
∙ Front side.
∙ 120mm.
∙ Chrome.
∙ Inner diameter:35mm.

Suitable for:

∙ Puch MS50.

Shock absorber bush front 145mm Puch MV/DS/VS/MS2

∙ Shock absorber bush.
∙ Frontside.
∙ 145mm.
∙ Chrome.

Suitable for:

∙ Puch MV.
∙ Puch DS.
∙ Puch VS.
∙ Puch MS2.

Shock absorber bush front 185mm Puch VZ50/M50

∙ Shock absorber bush.
∙ Frontside.
∙ 185mm.
∙ Chrome.

Measurements:

∙ Outer diameter:42mm.
∙ Inner diameter:40mm.

Suitable for:

∙ Puch VZ50.
∙ Puch M50.

Shock absorber bush front 185mm Puch DS50

∙ Shock absorber bush.
∙ Front side.
∙ 185mm.
∙ Chrome.

Measurements:

∙ Inner diameter:43mm.

Suitable for:

∙ Puch DS50.

Guide bush front fork top Puch MS50

∙ Guide bush front fork.
∙ Top side.

Measurements:

∙ Outer diameter:27,6mm
∙ Inner diameter:22mm.
∙ Height:26mm.

Suitable for:

∙ Puch MS50 (With small front fork)

Guide bush front fork bottom Puch MS50

∙ Guide bush front fork.
∙ Bottom side.

Measurements:

∙ Outer diameter:25,7mm
∙ Inner diameter:20,5mm.
∙ Heigth:26mm.

Suitable for:

∙ Puch MS50 (With small front fork)

Guide bush front fork top Puch MV50/VS50/VZ50/M50

∙ Guide bush front fork.
∙ Top side.

Measurements:

∙ Outer diameter:29,5mm
∙ Inner diameter:25mm.
∙ Heigth:26mm.

Suitable for:

∙ Puch MV50 (With wide front…

Guide bush front fork bottom Puch MV50/VS50/VZ50/M50

∙ Guide bush front fork.
∙ Bottom side.

Measurements:

∙ Outer diameter:28mm
∙ Innner diameter:23mm.
∙ Heigth:26mm.

Suitable for:

∙ Puch MV50 (With wide front…

0-Ring front fork Puch MV/MS/VS

∙ O-Ring.
∙ Placed on the bottom of the inner leg.
∙ 5.3mm x 2.4mm.

Suitable for:

∙ Puch MS50.
∙ Puch MS50L.
∙ Puch MS50V.
∙ Puch VS50.
∙ Puch MV50.
∙ Puch VZ50.

Felt washer front fork 29mm Puch MS50/MS50L/MS50V

∙ Felt washer front fork.

Measurements:

∙ Outer diameter:29mm
∙ Innner diameter:22mm.
∙ Heigth:6mm.

Suitable for:

∙ Puch MS50 (With small front fork)
∙ Puch MS50L…

Felt washer front fork 32,5mm Puch MV50/VS50

∙ Felt washer front fork.

Measurements:

∙ Outer diameter:32,5mm

Suitable for:

∙ Puch MV50.
∙ Puch VS50.

Felt strip front fork Puch MV50/VS50/MS50

∙ Felt strip front fork.

Suitable for:

∙ Puch MV50.
∙ Puch VS50.
∙ Puch MS50.

Shock absorber bush rear 180mm Puch VZ50/MC50

∙ Shock absorber bush.
∙ Rearside.
∙ 180mm.
∙ Chrome.

Afmetingen:

∙ Outer diameter:52mm.
∙ Inner diameter:50mm.

Suitable for:

∙ Puch VZ50.
∙ Puch MC50.

Shock absorber bush rear 155mm Puch MV/DS/VS/MS2

∙ Shock absorber bush.
∙ Rearside.
∙ 155mm.
∙ Chrome.

Suitable for:

∙ Puch MV.
∙ Puch DS.
∙ Puch VS.
∙ Puch MS2.

Shock absorber bush rear 185mm Puch DS50 / Alabama

∙ Shock absorber bush.
∙ Rearside.
∙ 185mm.
∙ Chrome.

Suitable for:

∙ Puch DS50.
∙ Puch Alabama.

Inner leg front fork Puch VZ/Dakota/Colorado/Texas

∙ Inner leg front fork.

Suitable for:

∙ Puch VZ.
∙ Puch Dakota.
∙ Puch Colorado.
∙ Puch Texas.

Piston rod inner leg front fork Puch VZ/Dakota/Colorado/Texas

∙ Piston rod inner leg front fork.

Suitable for:

∙ Puch VZ.
∙ Puch Dakota.
∙ Puch Colorado.
∙ Puch Texas.

Rubber gasket front fork Puch Monza/VZ/M50

∙ Rubber gasket front fork.

Measurements:

∙ Outer diameter: 39mm.
∙ Inner diameter: 31.5mm.
∙ Height: 3.7mm.

Suitable for:

∙ Puch Monza.
∙ Puch VZ.
∙ Puch M50.

Rubber dust set front fork Puch VZ50/M50

∙ Rubber dust set front fork (Cuffs)

Measurements:

∙ Length:14,5cm.
∙ Innerdiameter:34/42mm.

Suitable for:

∙ Puch VZ50.
∙ Puch M50.

Rubber dust set front fork 180mm universal

∙ Rubber dust set front fork (Cuffs)
∙ Universal.
∙ Black.

Measurements:

∙ Length:18cm.
∙ Innerdiameter:30/35mm.

Rubber dust set front fork 195mm universal

∙ Rubber dust set front fork (Cuffs)
∙ Universal.
∙ Black.

Measurements:

∙ Length:19,5cm.
∙ Innerdiameter:30/35mm.

Guide bush set front fork complete Puch MV50/VS50/VZ50/M50

∙ Guide bush set front fork.
∙ Set off 4 pieces.

Measurements:

∙ 2x Top bush:29.5/25/26mm.
∙ 2x Bottom bush:28/23/26mm.

Suitable for:

∙ Puch MV50.
∙ Puch…

Spacer ring headlight bracket/Crownplate 40/26/1 Puch Monza

∙ Spacer ring headlight bracket/Crownplate.
∙ 40/26/1.

Suitable for:

∙ Puch Monza.

Sticker set EBR Racing front fork

∙ Stickerset.
∙ EBR Racing.
∙ These stickers are original used on a EBR front fork.

Front fork sticker 75x15mm blue Puch

∙ Front fork sticker.
∙ Blue.

Measurements:

∙ Length:75mm.
∙ Width:15mm.

Front fork sticker 75x15mm red Puch

∙ Front fork sticker.
∙ Red.

Measurements:

∙ Length:75mm.
∙ Width:15mm.

Front fork sticker 75x15mm yellow Puch

∙ Front fork sticker.
∙ Yellow.

Measurements:

∙ Length:75mm.
∙ Width:15mm.

Front fork sticker 75x15mm green Puch

∙ Front fork sticker.
∙ Green.

Measurements:

∙ Length:75mm.
∙ Width:15mm.

Front fork sticker 75x15mm pink Puch

∙ Front fork sticker.
∙ Pink.

Measurements:

∙ Length:75mm.
∙ Width:15mm.

Front fork sticker 75x15mm orange Puch

∙ Front fork sticker.
∙ Orange.

Measurements:

∙ Length:75mm.
∙ Width:15mm.