​Tank Cure set complete 450 Gram

∙ Tank Cure set complete.
∙ 450 Gram (Enough for a tank up to 20 liters)

Complete set with:

∙ Tank Cure Coating set 450 Gram.
∙ Tank Cure Rust remover 500ML.
∙ Tank Cure Tankcleaner…

​Tank Cure coating set 450 Gram

∙ Tank Cure coating set.
∙ 450 Gram (Enough for a tank up to 20 liters)
∙ 300 Gram Coating+150 Gram Hardener.

Solvent free two component epoxy coating with excellent fuel and oil…

​Tank Cure Tankcleaner 500ML

∙ Tank Cure Tankcleaner.
∙ 500ML.

The Cure Tank Cleaner is a powerful detergent to degrease your tank. We recommend this detergent always because it is a good adhesion to the coating.…

​Tank Cure Rustremover 500ML

∙ Tank Cure Rust remover.​
∙ 500ML.

Tank Cure Deruster is an etching primer. We recommend this product always to be applied if your tank is heavily rusted. Fill the tank with Tank Cure…

Tank Cure Epoxy remover 500ML

∙ Tank Cure Epoxyremover.
∙ This detergent removes old coating or paint from your steel fuel tank.
∙ 1 day working time, after use thoroughly clean tank with Tank Cure tank cleaner.
∙ Do not…

Rust Arrestor 250ML

∙ Rust Arrestor.
∙ 250ML.
∙ Liquid Rust Arrestor.
∙ Easy handling with brush, spray equipment or through dipping.
∙ Comes well in cracks and crevices.
∙ Removes rust and oxidation from all metals…

Washing without water set Ekowax 750ML

∙ Spray bottle.
∙ 2 Microfibre cloths.
∙ Washing without water.
∙ Removes dirt and grease without scratching and leaves no lime stains.
∙ Non toxic and completely biodegradable…

Microfibre cloth 40x40xm 2 pieces

∙ Microfbre cloth.
∙ 40x40cm.
∙ 2 Pieces.
∙ Color: 1x green en 1x blue.
∙ 70% Polyester, 30% Polyamide.
∙ High Qaulity microfibre cloths.
∙ Washable up to 90°C.
∙ Suitable for the dryer.

Overflow tank fuel/oil with bracket Race/Cross universal

∙ Overflow tank.
∙ Overflow tank for fuel or oil.
∙ Mandatory for Race and Cross!
∙ Complete with mounting parts
∙ Small model.
∙ Universal.

Box Ignition POWERED BY HPI Aluminium Universal

∙ Box ignition.
∙ To cover up the ignition coil, cdi and voltage regulator!
∙ With deep etched POWEDERED BY HPI text on the lid.
∙ Aluminium.
∙ 100x120x65mm.
∙ Hand…

Box Ignition POWERED BY MVT Aluminium Universal

∙ Box ignition.
∙ To cover up the ignition coil, cdi and voltage regulator!
∙ With deep etched POWEDERED BY MVT text on the lid.
∙ Aluminium.
∙ 100x120x65mm.
∙ Hand…

Box Ignition with switch POWERED BY HPI Aluminium Universal

∙ Box ignition.
∙ To cover up the ignition coil, cdi and voltage regulator!
∙ Model with 2 lighted switches on the front side, for example to switch the lights on…

Box Ignition with switch POWERED BY MVT Aluminium Universal

∙ Box ignition.
∙ To cover up the ignition coil, cdi and voltage regulator!
∙ Model with 2 lighted switches on the front side, for example to switch the lights on…

Trailer hitch saddle pin attachment universal

∙ Trailer hitch.
∙ Saddle pin attachment.
∙ Universal.

VDM Racing Swingarm complete disc brake Puch Maxi S

∙ VDM Racing Swingarm.
∙ Top-Qaulity!
∙ Suitable for Race and Cross.
∙ Fits plug&play with a Puch five star wheel.

*Comes on the axle of the crank (Any work required to…

VDM Racing Swingarm (Puch Maxi S)∙ VDM Racing Swingarm.
∙ Top-Qaulity!
∙ Suitable for Race and Cross.
∙ Complete with wheel axle, selflocking nut, rings, chain tensiors, swingarm axle and bushes.
∙ To use with the…

VDM Racing footpeg plates adjustable black

∙ Footpeg plates.
∙ 3 Ways adjustable.
∙ For Race use.
∙ Aluminium.
∙ Black powdercoated.
∙ For example to mount on the race swingarm axle and on the frame.
∙ 2 Pieces.
∙ Universal.

VDM Racing footpeg plates black

∙ Footpeg plates.
∙ For Race use.
∙ Aluminium.
∙ Black powdercoated.
∙ For example to mount on the race swingarm axle and on the frame.
∙ 2 Pieces.
∙ Universal.

VDM Racing footpeg plates adjustable

∙ Footpeg plates.
∙ 3 Ways adjustable.
∙ For Race use.
∙ Aluminium.
∙ For example to mount on the race swingarm axle and on the frame.
∙ 2 Pieces.
∙ Universal.

VDM Racing footpeg plates

∙ Footpeg plates.
∙ For Race use.
∙ Aluminium.
∙ For example to mount on the race swingarm axle and on the frame.
∙ 2 Pieces.
∙ Universal.

Swingarm NOS Puch Magnum X

∙ Swingarm.
∙ NOS.
∙ Black (Small scratches are possible)

Suitable for:

∙ Puch Magnum X.

Swingarm rubber

∙ For Puch maxi original and EBR swingarm.

Swingarm mounting bolt set∙ For Original and EBR swingarm.
∙ 4 bolts with washers.

Chain tensioner (Original fit M6/12mm)

∙ A piece.
∙ Hole size:12mm.
∙ M6 thread.

Chain tensioner (M6/12mm)

∙ A piece.
∙ Hole size:12mm.
∙ M6 thread.

Chain Tensioner (Puch Magnum)

∙ Fits on all kinds of mopeds.
∙ Diameter:13mm.
∙ Thread:M6.
∙ length:60mm.
∙ A piece.

Chain tensioner Puch Magnum X/Monza/Dakota/VZ50/Etc

∙ Chain tensioner.
∙ Original model.
∙ A Piece.

Suitable for:

∙ Puch Magnum X.
∙ Puch MC50.
∙ Puch Monza.
∙ Puch Dakota.
∙ Puch VZ50.

Chain tensioner Puch M50 Racing

∙ Chain tensioner.
∙ A Piece.
∙ Original Puch article number:366.1.41.021.1.

Suitable for:

∙ Puch M50 Racing.

Reinforcement bar heavy duty MLM black Puch Maxi S/N

∙ Reinforcement bar.
∙ Black powdercoated.
∙ Heavy duty.
∙ Round model.
∙ Adjustable.
∙ Not in combination with a rear luggage carrier.
∙ A-Qaulity!
∙…

Reinforcement bar EBR black (Round)

∙ Black.
∙ Round model.
∙ Adjustable.

Reinforcement bar EBR chrome (Round)

∙ Chrome.
∙ Round model.
∙ Adjustable.

Reinforcement bar EBR black (Oval)

∙ Black.
∙ Oval model.
∙ Adjustable.

Reinforcement bar EBR chrome (Oval)

∙ Chrome.
∙ Oval model.
∙ Adjustable.

Reinforcement bar EBR black (Double)

∙ Black.
∙ Double model.
∙ Adjustable.

Reinforcement bar EBR chrome (Double)

∙ Chrome.
∙ Double model.
∙ Adjustable.

Reinforcement bar EBR black (Double curved)

∙ Black.
∙ Double curved model.
∙ Adjustable.

Reinforcement bar EBR chrome (Double curved)

∙ Chrome.
∙ Double curved model.
∙ Adjustable.

Tachometer VDO replica (60mm)

∙ VDO replica.
∙ Tachometer.
∙ 12 Volt 1.2 Watt light.
∙ 60mm.

Speedometer VDO replica (60km/h 48mm)

∙ VDO replica.
∙ 60km/h.
∙ Black/White Dail.
∙ 48mm.

Speedometer VDO replica (100km/h 48mm)

∙ VDO replica.
∙ 100km/h.
∙ Black/White Dail.
∙ 48mm.

Speedometer 80 km/h (60mm white universal with light)

∙ VDO connection.
∙ 80Km/h.
∙ White.
∙ 60mm.
∙ Universal.
∙ With light connection, without BA7 light bulb (You can use 6V or 12V)

Speedometer housing universal (60mm)

∙ Speedometer housing for 60mm Speedometers.
∙ Universal.
∙ Black.
∙ With mount.

Speedometer clamp 60mm (Black)

∙ For a 60mm speedometer.
∙ Black.

Blind cover speedometer housing Puch

∙ Blind cover speedometer hosuing.
∙ Black.
∙ With Puch logo.

Suitable for:

∙ Puch various models.

MLM Heavy Duty side stand black (Puch Maxi S)

∙ Fits on all Puch E50 and ZA50 engines.
∙ This side stand only fits on a Puch Maxi S (Not on a Puch Maxi N)
∙ Length:17cm (2 spacers of 1.5mm en 3mm thick are included)
∙…

Sidestand short (Blue)

∙ Fits on a original Puch Maxi swingarm.
∙ Short model.
∙ Length:23cm.
∙ Blue.

Sidestand short (Chrome)

∙ Fits on a original Puch Maxi swingarm.
∙ Short model.
∙ Length:21cm.
∙ Chrome.

Sidestand short (Black)

∙ Fits on a original Puch Maxi swingarm.
∙ Short model.
∙ Length:21cm.
∙ Black.

Sidestand long (Chrome)

∙ Fits on a original Puch Maxi swingarm.
∙ Long model.
∙ Length:25cm.
∙ Chrome.

Sidestand long (Black)

∙ Fits on a original Puch Maxi swingarm.
∙ Long model.
∙ Length:25cm.
∙ Black.

Sidestand long Twist EBR swing arm (Chrome)

∙ Only fits in a EBR swingarm.
∙ Long model.
∙ Twist.
∙ Chrome.

Sidestand spring

Length:90mm.

Centerstand Puch Maxi S Short 21cm (Complete set)

∙ For Puch Maxi S.
∙ Short model (21cm)
∙ Complete set.

Centerstand Puch Maxi S Long 24 cm (Complete set)

∙ For Puch Maxi S.
∙ Long model (24cm)
∙ Complete set.

Centerstand Puch Maxi N Short 17cm (Complete set)

For Puch Maxi N.
Short model (17cm)
Complete set.

Centerstand as original with straight bar Puch Maxi N short 17cm (Complete set)

∙ For Puch Maxi N.
∙ As original with straight bar.
∙ Short model (17cm)
∙ Complete set.

Centerstand Puch Maxi S (Short 21cm)

∙ For Puch Maxi S.
∙ Short model (21cm)

Centerstand Puch Maxi S (Long 24 cm)

∙ For Puch Maxi S.
∙ Long model (24cm)

Centerstand Puch Maxi N (Short 17cm)

∙ For Puch Maxi N.
∙ Short model (17cm)

Centerstand as original with straight bar Puch Maxi N (Short 17cm)

∙ For Puch Maxi N.
∙ As original with straight bar.
∙ Short model (17cm)

Centerstand Puch Maxi S NOS (Short 22cm)

∙ For Puch Maxi S.
∙ Short model (22cm)

MLM centerstand heavy short 21cm Puch Maxi S

∙ Centerstand.
∙ Short model (21cm)
∙ Easy to use because of the extended left foot.
∙ Heavy model!
∙ Top-Qaulity!
∙ MLM.

Suitable for:

∙ Puch Maxi S.

Centerstand Mounting block kit (Aluminium)

∙ Mounting block kit to mount a centerstand on a Puch e50 engine.
∙ For Puch maxi.
∙ Aluminium.

Centerstand Mounting block (Chrome)

∙ Mounting block to mount a centerstand on a Puch e50 engine.
∙ For Puch maxi.
∙ Aluminium.

Centerstand Mounting block (Black)

∙ Mounting block to mount a centerstand on a Puch e50 engine.
∙ For Puch maxi.
∙ Black.

Centerstand spring

Rubber centerstand/Tank carrier (Puch Maxi S/N/MV)

∙ For Puch Maxi S/N/MV.