Graduated disc Polini 220mm (Ignition timing)

∙ Graduated disc / Degree timing.
∙ To use for ignition timing and settings.
∙ Diameter: 220mm.
∙ Polini.
∙ Original Polini article number:173.0003.

With various fixing…

Box Ignition POWERED BY HPI Aluminium Universal

∙ Box ignition.
∙ To cover up the ignition coil, cdi and voltage regulator!
∙ With deep etched POWEDERED BY HPI text on the lid.
∙ Aluminium.
∙ 100x120x65mm.
∙ Hand…

Box Ignition POWERED BY MVT Aluminium Universal

∙ Box ignition.
∙ To cover up the ignition coil, cdi and voltage regulator!
∙ With deep etched POWEDERED BY MVT text on the lid.
∙ Aluminium.
∙ 100x120x65mm.
∙ Hand…

Box Ignition with switch POWERED BY HPI Aluminium Universal

∙ Box ignition.
∙ To cover up the ignition coil, cdi and voltage regulator!
∙ Model with 2 lighted switches on the front side, for example to switch the lights on…

Box Ignition with switch POWERED BY MVT Aluminium Universal

∙ Box ignition.
∙ To cover up the ignition coil, cdi and voltage regulator!
∙ Model with 2 lighted switches on the front side, for example to switch the lights on…

Battery 12 Volt Gel 4 Ampere

∙ Battery.
∙ 12 Volt.
∙ 4 Ampere.
∙ Gel battery (Maintence free)
∙ Type YTC4L-BS.

Measurements:

∙ Length:110mm.
∙ Width:70mm.
∙ Heigth:85mm.

Distilled water 5 Liter

∙ Distilled water.
∙ 5 Liter.
∙ Universal.

ENIGMA electronic ignition coil (VEC)

∙ Suitable for Puch Maxi and all Puch mopeds with 2, - 3, and 4. Geared motor.
∙ Also for Kreidler, Zündapp, Sachs, Hercules, Tomos with Bosch or Iskra ignitions.
∙ Suitable for 6v en…

VEC TV-2E electronic ignition coil

∙ Suitable for Puch Maxi and all Puch mopeds with 2, - 3, and 4. Geared motor.
∙ Also for Kreidler, Zündapp, Sachs, Hercules, Tomos with Bosch or Iskra ignitions.
∙ Suitable for 6v en…

Ignition coil PVL replica model Bosch A-Qaulity Puch Maxi

∙ Ignition coil.
∙ PVL replica coil.
∙ Model as Bosch (Replacement coil as original)
∙ Mounting bolt distance:54mm.
∙ A-Qaulity!

Suitable for:

∙ Puch…

Ignition coil PVL replica model Bosch A-Qaulity Puch MV/VS/DS/Etc

∙ Ignition coil.
∙ PVL replica coil.
∙ Model as Bosch (Replacement coil as original)
∙ Mounting bolt distance:54mm.
∙ A-Qaulity!

Suitable for:

∙ Puch…

Ignition coil Sport model as Bosch 2.0

∙ Ignition coil.
∙ Model 2.0.
∙ Model like Bosch (Replacement coil as original!)
∙ High voltage sport ignition coil for all Bosch ignitions.
∙ Very strong spark, even at low…

Ignition coil Sport model as Bosch 1.0

∙ Ignition coil.
∙ Model 1.0.
∙ Model like Bosch (Replacement coil as original!)
∙ High voltage sport ignition coil for all Bosch ignitions.
∙ Very strong spark, even at low…

MVT Digital Race inner rotor Ignition (With 12V light)

∙ MVT Digital Race.
∙ The perfect ignition for Racing purposes and also for street use.
∙ The igniotion has a cariable curve controlled by the CDI (Right pre-ignition…

MVT inner rotor Ignition (With 12V light)

∙ The perfect ignition for Racing purposes and for street use.
∙ Included Ignition coil and CDI.
∙ Lightcoil 12Volt 55Watt.
∙ For Puch left- and right-handed engines.
∙ Comes…

HPI 2-Ten ignition (With light 40Watt)

∙ Light rotor (Better acceleration and faster throttle response)
∙ with build in light coil.
∙ 40 Watt.
∙ Always a good spark.

Coil Top Performances Kokusan∙ Coil.
∙ Top Performances.
∙ Unlimited.
∙ For Kokusan ignition.
∙ Model with fixed curve.
∙ Length spark plug cable:50cm.

Selettra KZ inner rotor Ignition

∙ Ultra Light rotor (48mm diameter and just 200 grams)
∙ Ignition is suitable for left- and right turning engines so it also can be used on Z50 and ZA50 engines.
∙ No light possible!

Ignition model Bosch right turning complete (6 Volt 17 Watt)

∙ Ignition.
∙ Model as Bosch.
∙ Right turning.
∙ 6 Volt.
∙ 17 Watt.
∙ Complete with flywheel.

Suitable for:

∙ Puch Maxi.
∙ Zundapp.

Ignition model Bosch right turning with brake light (6 Volt 15/5 Watt)

∙ Ignition.
∙ Model as Bosch.
∙ Right turning.
∙ 6 Volt.
∙ 15/5 Watt.
∙ With brake light.

Suitable for:

∙ Puch Maxi.
∙ Zundapp.
∙…

Ignition model Bosch right turning (6 Volt 17 Watt)

∙ Ignition.
∙ Model as Bosch.
∙ Right turning.
∙ 6 Volt.
∙ 17 Watt.

Suitable for:

∙ Puch Maxi.
∙ Zundapp.

Ignition electronic left turning Puch MV/MS/VS/DS Etc (12 Volt)

∙ Ignition electronic.
∙ With voltage regulator.
∙ Left turning.
∙ Model as Bosch with CDI.
∙ 12 Volt.
∙ Complete with flywheel.

Suitable for:

∙ Puch…

Ignition electronic left turning Puch MV/MS/VS/DS Etc (12V 33/35W)

∙ Ignition electronic.
∙ Left turning.
∙ Model as Bosch with CDI.
∙ 12 Volt.
∙ 33Watt/35Watt.
∙ Complete with flywheel.

Suitable for:

∙ Puch…

Ignition left turning complete Puch MV/MS/VS/DS Etc (6 Volt 17 Watt)

∙ Ignition.
∙ Left turning.
∙ Model as Bosch.
∙ 6 Volt.
∙ 17 Watt.
∙ Complete with flywheel.

Suitable for:

∙ Puch MS50(V) (From +/- 1960)
∙…

Ignition left turning Puch MV/MS/VS/DS Etc (6 Volt 17 Watt)

∙ Ignition.
∙ Left turning.
∙ Model as Bosch.
∙ 6 Volt.
∙ 17 Watt.

Suitable for:

∙ Puch MS50(V) (From +/- 1960)
∙ Puch VS50 (From +/- 1960)
∙ Puch…

Flywheel left turning ignition (Puch 4 gear)

∙ Flywheel.
∙ Left turning.
∙ For Puch 4 gear engines.

Suitable for:

∙ Puch Monza.
∙ Puch Grand Prix.
∙ Puch ZV50 (With wind cooled cylinder)
∙ Puch M50 Racing.

CDI unit Electronic Ignition

For Electronic Ignitions.

Coil 6 Volt Puch Maxi∙ Coil ignition.
∙ Replica model.
∙ 6 Volt.

Coil 6 Volt black Puch Maxi

∙ Coil.
∙ 6 Volt.
∙ Black.

Suitable for:

∙ Puch Maxi models.

Flywheel model Bosch right turning (M26x1.5)

∙ Flywheel.
∙ Model as Bosch.
∙ Right turning.
∙ For ignition with contact breaker points.
∙ M26x1.5.

Suitable for:

∙ Puch Maxi.
∙ Zundapp.

Spacer extra coil Bosch ignition

∙ Spacer.
∙ To use for mounting a extra coil on the coil on the ignition.
∙ A Piece.

Measurements:

∙ Outer diameter:8mm.
∙ Inner diameter:4mm.
∙ Heigth:8mm.

Suitable for:

∙…

Groundplate model Bosch ignition

∙ Groundplate.
∙ Model Bosch ignition.
∙ Diameter:90mm.

Groundplate original ignition

Original Puch e50.

*Used part!

Mounting bolt/spring washer contact breaker points

∙ Mounting bolt/spring washer contact breaker points.
∙ To mount the contact breaker points on a original ignition groundplate.

Bolt set Original ignition

∙ M4.
∙ Fits in original Puch engines.

Bolt set HPI/PVL/Selettra inner rotor ignition

∙ M4.
∙ Fits in original Puch engines.

Flywheel collar nut increased (M10X1)

∙ Flywheel collar nut.
∙ Increased collar model.
∙ M10x1.
∙ A Piece.

Measurements:

∙ Wrench width:17mm.
∙ Heigth:15mm.
∙ Diameter collar:22mm.

Suitable for:

∙ Puch.

Flywheel nut (M10x1)

∙ Flywheel nut.
∙ M10x1.
∙ A Piece.

Flywheel nut Kokusan ignition 14mm (M10X1)

∙ Flywheel nut.
∙ M10x1.
∙ Length:14mm.
∙ For Kokusan ignition.
∙ A Piece.

Reinforcement plate 350 Gram (HPI inner rotor ignition)

∙ Reinforcement plate.
∙ 350 Gram.
∙ Fits on a HPI inner rotor ignition.
∙ Easy to mount on the Rotor.
∙ For more mass on the Rotor.
∙ Stainless steel.

Reinforcement plate 280 Gram (HPI 2-Ten ignition)

∙ Reinforcement plate.
∙ 280 Gram.
∙ Fits on a HPI 2-Ten ignition.
∙ Easy to mount on the Rotor.
∙ For more mass on the Rotor.
∙ Stainless steel.

CDI unit Kokusan ignition (6Volt/12Volt)

∙ For 6 volt and 12 volt Kokusan ignition.
∙ Also fits on a Puch P1.

Stator/groundplate (HPI Inner rotor ignition)

∙ Stator/groundplate for HPI Inner rotor ignition.

Coil (HPI Inner rotor ignition)

∙ Coil for HPI Inner rotor ignition.

Rotor (HPI Inner rotor ignition)

∙ Rotor unit for HPI Inner rotor ignition.

Coil bracket (HPI Inner rotor ignition)

∙ Coil bracket for HPI Inner rotor ignition.

CDI Unit HPI inner rotor ignition

∙ CDI Unit.
∙ For HPI inner rotor ignition.

CDI Unit (Double curve!) HPI inner rotor ignition

∙ CDI Unit.
∙ For HPI inner rotor ignition.
∙ With double curve!
∙ The curve can be changed with the HPI steering switch from the webshop.

CDI Unit (Double curve!) HPI 2-Ten ignition

∙ CDI Unit.
∙ For HPI 2-Ten ignition.
∙ With double curve!
∙ The curve can be changed with the HPI steering switch from the webshop.

Handlebar switch for CDI double curve HPI

∙ Handlebar switch.
∙ To use on HPI CDI units with double curve.

Stator/groundplate PVL Inner rotor ignition)

∙ Stator/groundplate for PVL Inner rotor ignition.

Coil (PVL Inner rotor ignition)

∙ Coil for PVL Inner rotor ignition.

Rotor (PVL Inner rotor ignition)

∙ Rotor unit for PVL Inner rotor ignition.

Stator MVT inner rotor ignition

∙ Stator for MVT inner rotor ignition.

CDI unit (MVT Inner rotor ignition)

∙ CDI unit for MVT Inner rotor ignition.

Coil (MVT Inner rotor ignition)

∙ Coil for MVT Inner rotor ignition.

Rotor (MVT Inner rotor ignition)

∙ Rotor unit for MVT Inner rotor ignition.

Groundplate (MVT Inner rotor ignition)

∙ Groundplate for MVT Inner rotor ignition.

Coil bracket MLM

∙ Coil bracket for HPI/PVL/Bosch/Ducati ignitions and more.
∙ Screw bolt holes:32mm till 54mm.
∙ For a good grounding of the ignition coil its important to remova a small amount of coating.

Ignition revision set

Complete set with:

∙ Ignition coil.
∙ Contact points.
∙ Capacitor.
∙ NGK spark plug cover.
∙ Spark plug cable (Thin)

Coil for Puch (Model as Bosch)

∙ Coil model as Bosch.
∙ Puch Maxi S,N and MV, VS, DS, MS etc.
∙ Mounting hole distance: 54mm.

Contact breaker points (Bosch)

∙ Bosch.
∙ With wire.

Contact breaker point kit (Heavy duty Bosch)

∙ Bosch.
∙ Heavy duty.

Contact breaker point kit (With cable)

Contact breaker point kit (With cable EFFE)

∙ EFFE.
∙ Top Quality.

Contact breaker point kit (Without cable)

Capacitor (With nut connection Bosch)

Capacitor (With soldered connection Bosch)

Capacitor (With soldered connection Bosch long)

∙ A1 quality.
∙ 30mm long.

Capacitor (With wire EFFE)

∙ EFFE.
∙ A1 quality.
∙ Model with wire.
∙ For Bosch and Ducati ignitions.

Capacitor (With nut EFFE)

∙ A1 quality.
∙ Model with nut.

Capacitor (With nut connection modell Ducati)

∙ Modell Ducati.
∙ modell with nut connection.

Capacitor (With nut)

∙ A1 quality.
∙ Model with nut.

Capacitor (With soldered connection EFFE)

∙ A1 quality.

Capacitor (With soldered connection)

∙ A1 quality.

HPI inner rotor light coil

∙ Suitable for all HPI inner rotor ignitions.
∙ This coil only supplies 12 volts and 10 watts of power!