Main gear (For 19 teeth clutch bell)

∙ This main gear fits a 19 teeth clutch bell.

*Used part!

Main gear (For 21 teeth clutch bell)

∙ This main gear fits a 21 teeth clutch bell.

*Used part!

Main gear set 3 bearing (For 19 teeth clutch bell)

∙ This main gear fits a 19 teeth clutch bell.

*Used part!

Complete set with:

∙ 1x bearing 6203C3 NTN.
∙ 1x 17/40/7 seal.
∙ 1x Snapring.

∙ Brand:NTN.

Main gear set 4 bearing (For 21 teeth clutch bell)

∙ This main gear fits a 21 teeth clutch bell.

*Used part!

Complete set with:

∙ 2x bearing 6203C3 NTN.
∙ 1x 17/40/7 seal.
∙ 1x Snapring.

∙ Brand:NTN.

VDM Racing KTM clutch bell (with needlebearing)

∙ The clutch bell is stronger, lighter and with needlebearing.
∙ Choice out of 19 and 21 teeth.

VDM Racing kickstart clutch bell

∙ The clutch bell is stronger and lighter.
∙ Choice out of 19 and 21 teeth.

VDM Racing push-start clutch bell

∙ The clutch bell is stronger and lighter.
∙ Choice out of 19 and 21 teeth.

VDM Racing KTM clutch bell

∙ The clutch bell is stronger and lighter.
∙ Choice out of 19 and 21 teeth.

Racing Push-start clutch bell with needlebearing (21 Teeth)

∙ The clutch bell is stronger and lighter as original.
∙ Complete with Needlebearing.
∙ Push-start/Pedal-start model.
∙ 21 Teeth.

Racing Push-start clutch bell (21 Teeth)

∙ The clutch bell is stronger and lighter as original.
∙ Complete with bronze bush.
∙ Push-start/Pedal-start model.
∙ 21 Teeth.

Racing kickstart clutch bell

∙ The clutch bell is stronger and lighter as original.
∙ 19 Teeth.

*Used part!

Original kickstart clutch bell NOS

∙ Original Puch E50.
∙ 19 Teeth.

Original push-start clutch bell

∙ Original Puch E50.
∙ Choice out of 19 and 21 teeth.

*Used part!

19 teeth clutch bell gear

∙ 19 teeth.

*Used part!

21 teeth clutch bell gear

∙ 21 teeth.

*Used part!

Shim washer assortiment set (30 Pieces)

Shim washer assortiment set for the kickstart gear and for asjusting the clutch bell.

Complete kit with:

∙ 2x Shim washer kickstart gear.
∙ 2x Shimring 15*21*0.2 (Frontside)
∙ 5x…

Needlebearing clutch bell

Replacement part for the VDM clutch bells and gears with needlebearing from the webshop.​
This bearing doesnt fit in a original clutch bell.
(Photo 2 is a example photo)

Bearing bush clutch bell

For Puch e50 clutch bells.
Brass.
A piece.
(Photo 2 is a example photo)

Circlip clutch side frontside

15mm.

Circlip clutch side backside

17mm.

Circlip front sprocket

Pressplate clutch Push start (Ultra lightweight Race)

∙ For Puch Maxi e50 Push start/Pedal start engines.
∙ Ultra lightweight.
∙ Complete with pressure pin.
∙ lighter as original.
∙ 82.4 Gram!

Pressplate clutch Push start (Lightweight Race)

∙ For Puch Maxi e50 Push start/Pedal start engines.
∙ Lightweight.
∙ Complete with pressure pin.
∙ Lighter as original.
∙ 107.9 gram.

Pressplate clutch E50 Push/Pedal start (Original Surflex)

∙ For Puch Maxi e50 Push-start/Pedal start engine.
∙ Complete with pressure pin.
∙ Original Surflex.

Pressplate clutch E50 Push/Pedal start (As original)

∙ For Puch Maxi e50 Push-start/Pedal start engine.
∙ As original.
∙ Complete with pressure pin.

Pressplate Push-start clutch

*Used part!

Circlip pressplate push-start clutch​

A piece.

*Used part!

Pressure pin clutch pressure plate E50 Push-start engine

∙ With bearings.

Axial bearing set clutch pressure plate E50 Push-start engine

Circlip clutch pressure plate E50 Push-start engine

Spring washer push-start clutch

A piece.

Nut push-start clutch

M10.
A piece.

Push-start nut+spring washer

M10.

*Used part!

Kickstart pressure plate/sprocket complete

∙ Complete with nut and springwasher.
∙ For kickstart engines and the kickstart conversion kits.

Kickstart pressure plate/sprocket

For kickstart engines and the kickstart conversion kits.

Kickstart pressure plate

Pay attention! This are used parts and may vary slightly from the pictures.

For kickstart engines and the kickstart conversion kits.

Kickstart engine sprocket

To be used on E50 kickstart engines.

Spring washer kickstart clutch

A piece.

Nut kickstart clutch

M10.
A piece.

Kickstart nut+spring washer

M10.

*Used part!

Shim washer clutch bell (Frontside)

∙ To create the perfect play of the clutch bell.
∙ Frontside clutch bell.
∙ 15*21.

Shim washer clutch bell (Backside)

∙ To create the perfect play of the clutch bell.
∙ Backside clutch bell.
∙ 17*24.