VDMRacing Kickstart conversion kit with sprocket chrome Top-Qaulity! Puch e50

∙ Kickstart conversion kit.
∙ With this set you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙ Chrome…

VDMRacing Kickstart conversion kit chrome Top-Qaulity! Puch e50

∙ Kickstart conversion kit.
∙ With this set you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙ Chrome conversion…

VDMRacing Conversion plate kickstart conversion kit chrome Top-Qaulity! Puch e50

∙ Conversion plate.
∙ With this conversion plate you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙…

VDMRacing Clutch bell plate kickstart conversion kit Top-Qaulity! Puch e50

∙ Clutch bell plate.
∙ With this clutchbell plate you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙…

Pressure Plate Clutch Kickstart Puch e50

∙ Pressure plate.
∙ This part is mounted on the clutch of a Puch e50 kickstart engine.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Identical to Puch article number

349.1.12.305.1

Sprocket Clutch Kickstart Puch e50

∙ Sprocket.
∙ This part is mounted on the clutch of a Puch e50 kickstart engine.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

VDMRacing Crankshaft nut kickstart conversion kit Top-Qaulity! Puch e50

∙ Crankshaft nut.
∙ With this crankshaft nut you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙…

Mounting bolt set M6 kickstart conversion set 5-Pieces Puch e50

∙ Mounting bolt set.
∙ Set to assemble a kickstart conversion kit on a Puch e50 engine.
∙ 5-Pieces.

Suitable for:

∙ Puch e50 Push-start / Pedal-start engine.

Bolts set Engine mounting Complete Puch Maxi / Z-one / Manet / Korado / Etc

∙ Mounting set / Bolt set enginemounting.
∙ Complete set to mount the engine to the frame.

Complete set with:

∙ 3x Mounting Bolt.
∙ 3x Mounting…

Cylinder Mounting set M6 3D Nuts 16-Pieces Puch Maxi

∙ Studs set.
∙ M6 / M6 x 115mm.
∙ Galvanized.
∙ 16 Pieces.

Measurements:

∙ Total length: 106mm.
∙ Screw thread Engine side: M6.
∙ Screw thread Cylinderhead…

Cylinder Mounting set M6 3D Nuts 12-Pieces Puch Maxi

∙ Studs set.
∙ M6 / M6 x 115mm.
∙ Galvanized.
∙ 12 Pieces.

Measurements:

∙ Total length: 106mm.
∙ Screw thread Engine side: M6.
∙ Screw thread Cylinderhead…

Cylinder Mounting set 16-Pieces Puch Maxi

∙ Studs set.
∙ M6 / M6 x 115mm.
∙ Galvanized.
∙ 16 Pieces.

Measurements:

∙ Total length: 106mm.
∙ Screw head Engine side: M6.
∙ Screw thread Cylinderhead side:…

Cylinder Mounting set 8-Pieces Puch Maxi

∙ Studs set.
∙ M6 / M6 x 106mm.
∙ Galvanized.
∙ 8 Pieces.

Measurements:

∙ Total length: 106mm.
∙ Screw thread Engine side: M6.
∙ Screw thread Cylinderhead side:…

Stud Crank case / Cylinder 120mm M8 > M6 Puch

∙ Stud.
∙ To be used for mounting the cylinder on the engine.
∙ If the screw thread in the engine is broken, you can easily solve this with these adapter studs!
∙ Hardened…

Stud Crank case / Cylinder 116mm M7 > M6 Puch

∙ Stud.
∙ To be used for mounting the cylinder on the engine.
∙ If the screw thread in the engine is broken, you can easily solve this with these adapter studs!
∙ Hardened…

Stud Crank case / Cylinder 105mm M6 Puch

∙ Stud.
∙ To be used for mounting the cylinder on the engine.
∙ Hardened Qaulity!
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Length: 105mm.

Suitable for:

∙ Puch Engines.

Stud Intake / Exhaust 30mm M10 > M8 Puch

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ If the screw thread in the cylinder is broken, you can easily solve this with these adapter studs!
∙ Thread:1.25!
∙…

Stud Intake / Exhaust 30mm M8 > M6 Puch

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ If the screw thread in the cylinder is broken, you can easily solve this with these adapter studs!
∙ Galvanized!
∙ A…

Stud Intake / Exhaust 30mm M7 > M6 Puch

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ If the screw thread in the cylinder is broken, you can easily solve this with these adapter studs!
∙ Hardened…

Stud Intake / Exhaust 35mm M6 Puch

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ Hardened Qaulity!
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Length: 35mm.

Suitable for:

∙ Puch Engines.

Nut Exhaust Brass M6 Long Model Universal

∙ Nut exhaust / Exhaustnut.
∙ Long brass nut for easy mounting of the exhaust due to the longer nuts and brass nuts prevent seizing of the nuts on the studs, and becuase of this…

Nut Exhaust Brass M6 Short Model Universal

∙ Nut exhaust / Exhaustnut.
∙ Short brass nut for mounting of the exhaust, brass nuts prevent seizing of the nuts on the studs, and becuase of this prevents the studs breaking off…

Nut Exhaust Copper M6 Short Model Universal

∙ Nut exhaust / Exhaustnut.
∙ Short copper nut for mounting of the exhaust, copper nuts prevent seizing of the nuts on the studs, and becuase of this prevents the studs breaking off…

Exhaust / Intake Studs set M6 Puch Maxi

∙ Exhaust / Intake studset.

Complete set with:

∙ 2x M6 Studs.
∙ 2x M6 Flangenut.

Measurements:

∙ Screw thread: M6.
∙ Length: 32mm.

Suitable for:

∙ Puch Maxi Models.

Mounting set Inlet manifold / Cylinder 10mm - 19mm Round M6 Puch Maxi

∙ Mountingset / assembly inlet manifold.
∙ Complete set for mounting a 10mm - 19mm inlet manifold with a round inlet on the cylinder.

Complete set…

Mounting set Inlet manifold / Cylinder 10mm - 15mm Round M6 Puch Maxi

∙ Mountingset / assembly inlet manifold.
∙ Complete set for mounting a 10mm - 15mm inlet manifold with a round inlet on the cylinder.

Complete set…

Mounting set Inlet manifold / Cylinder 10mm - 15mm Sqaure M6 Puch Maxi

∙ Mountingset / assembly inlet manifold.
∙ Complete set for mounting a 10mm - 15mm inlet manifold with a square inlet on the cylinder.

Complete set…

Mounting set Exhaust / Cylinder 25mm - 28mm Exhaust manifold M6 Puch

∙ Mountingset / assembly set exhaust.
∙ Complete set for mounting a exhaust with a exhaust manifold of 25mm - 28mm on the cylinder.
∙ The set comes with…

Mounting set Exhaust / Cylinder 18mm - 22mm Exhaust manifold M6 Puch

∙ Mountingset / assembly set exhaust.
∙ Complete set for mounting a standard exhaust with a exhaust manifold of 18mm - 22mm on the cylinder.
∙ The set…

Bolt set Crankcase 9-Pieces Puch ZA50

∙ Boltset crankcase.
∙ Slotted model.
∙ 9 Pieces.

Suitable for:

∙ Puch ZA50 2-Speed Automatic.

Bolt set Engine 17-Pieces Puch ZA50

∙ Boltset engine / Clutch cover.
∙ Slotted model.
∙ 17 Pieces.

Suitable for:

∙ Puch ZA50 2-Speed Automatic.

Bolt set Clutch cover 8-Pieces Puch ZA50

∙ Boltset Clutch cover.
∙ Slotted model.
∙ 8 Pieces.

Suitable for:

∙ Puch ZA50 2-Speed Automatic.

Oil Fill plug / Drain plug set Puch Maxi e50

∙ Oilfill / Drainplug set.

Complete set with:

∙ 1x Oil fill plug.
∙ 1x Fibre washer Oil fill plug.
∙ 1x Oil Drain plug.
∙ 1x Fibre washer Drain plug.

Suitable for:

∙…

Oil Fill plug Puch Maxi e50

∙ Oilfill plug.
∙ Placed in the clutch cover.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Oil Drain plug Puch Maxi e50

∙ Oil drainplug.
∙ Placed under the crankcase.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Fibre washer Oil Fill plug Puch Maxi e50

∙ Fibrewasher oil fillplug.
∙ Placed in the clutch cover.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Fibre washer Oil Drain plug Puch Maxi e50

∙ Fibrewasher oil drainplug.
∙ Placed under the crankcase.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Oil Fill plug Remake Kickstart cover Puch Maxi e50

∙ Olie vul bout.
∙ Suitable for the Remake kickstart clutch cover.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Oil Fill plug Black Tomos / Puch Z50 / ZA50 / 2V / 3V / 4V

∙ Oil fillplug.
∙ Rubber.
∙ Black.
∙ A Piece.

Suitable for:

2, 3 & 4 Gear Engines.

∙ Puch Maxi Z50.
∙ Puch Maxi ZA50.
∙ Puch MV50.
∙ Puch MS50L.
∙…

Oil Fill plug Grey Tomos / Puch Z50 / ZA50 / 2V / 3V / 4V

∙ Oil fillplug.
∙ Rubber.
∙ Grey.
∙ A Piece.

Suitable for:

2, 3 & 4 Gear Engines.

∙ Puch Maxi Z50.
∙ Puch Maxi ZA50.
∙ Puch MV50.
∙ Puch MS50L.
∙ Puch…

Woodruff Key Puch / Zündapp / Kreidler

∙ Woodruff / Flywheel Key.
∙ A Piece.

Measurements:

∙ Length: 9.66mm.
∙ Height: 3.7mm.
∙ Width: 3mm.

Suitable for:

∙ Puch Models.
∙ Zundapp Models.
∙ Kreidler Models.

Woodruff Key Clutch Puch Maxi e50

∙ Woodruff key Clutch side.
∙ A Piece.

Measurements:

∙ Length: 12.65mm.
∙ Height: 5mm.
∙ Width: 3mm.

Suitable for:

∙ Puch Maxi e50 Models.

Assortiment set Small Material Engine 53-Pieces Puch Maxi e50

∙ Assortimentset engine.
∙ Small material (Various common used parts for Puch Maxi)
∙ 53 Pieces.

Complete set with:

∙ 5x Woodruff key flywheel.
∙ 5x…

Start Mechanism set 3-Pieces Swiing Top-Qaulity! Puch ZA50

∙ Startunit / Start mechanism set.
∙ 3 Pieces.
∙ Swiing, Top-Qaulity!

Complete set with:

∙ Guide nut.
∙ Pull bolt.
∙ Starter cable.

Suitable for:

∙ Puch ZA50 Engines.

Grommet Start mechaniscm / Brake light Switch Puch ZA50

∙ Grommet / Rubber.
∙ For startmechanism, brakelight switch & sparkplug cable.

Measurements:

∙ Length: 45mm.
∙ Diameter: 19mm > 10mm.

Suitable for:

∙ Puch ZA50 Engines.

Spring Sprocket Kickstart cover Tomos A35 / A55 / Puch Maxi Z50 / e50

∙ Kickstart sprocket / Kickstartspring.
∙ This spring is mounted in the kickstart clutch cover on the outgoing gear.

Note! Photo 2 is a example…

Spring holder Kickstart cover Plastic Puch Maxi e50

∙ Kickstart springholder / kickstartring.
∙ This spring holder is mounted in the kickstart clutch cover. and ensures that the spring remains in position.
∙ Plastic.

Note!…

Spring Kickstart Cover Puch Maxi e50

∙ Kickstartspring.
∙ This spring is mounted in the kickstart clutch cover. and ensures that the kickstart pedal comes back up after starting.

Note! Photo 2 is a example photo.

Suitable…

Shim washer Kickstart Cover 14mm x 10mm x 0.5mm Puch Maxi e50

∙ Shimwasher kickstart clutchcover.
∙ Placed on both Sprockets that fall into the crankcase.
∙ A Piece.

Measurements:

∙ 14mm x 10mm x 0.5mm.

Note! Photo 2…

Kickstart pedal Bended Chrome Puch Maxi e50 / ZA50 / Z50

∙ Kickstartpedal.
∙ Bended model.
∙ Chrome.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.
∙ Puch Maxi ZA50 Kickstart Engines.
∙ Puch Maxi Z50 Kickstart…

Kickstart pedal Straight Chrome Puch Maxi e50

∙ Kickstartpedal.
∙ Straight model.
∙ Chrome.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.

Kickstart pedal set Straight Black 3-Pieces Puch Maxi e50

∙ Kickstartpedal set.
∙ Straight model.
∙ Black.
∙ 3 Pieces.

Complete set met:

∙ Kickstartpedal Black.
∙ Rubber with Puch print.
∙ Mounting key.

Suitable…

Rubber Kickstart pedal with Puch Print Puch Maxi e50 / ZA50 / Z50

∙ Rubber kickstartpedal.
∙ Model with Puch print / logo.

Measurements:

∙ Length: 65mm.
∙ Inner diameter: 8mm.
∙ Outer diameter: 15mm.

Suitable…

Rubber Kickstart pedal Puch Maxi e50 / ZA50 / Z50

∙ Rubber kickstartpedal.
∙ Black.

Measurements:

∙ Length: 65mm.
∙ Inner diameter: 8mm.
∙ Outer diameter: 15mm.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.
∙…

Key kickstart / pedals 9.5mm / 43mm Puch Maxi / Citta / Vespa

∙ Key.
∙ 9.5mm model.
∙ This part is used for mounting a kickstart pedal or pedal arm.
∙ Universal.

Measurements:

∙ Diameter: 9.5mm.
∙ Length:…

Key kickstart / pedals 9.0mm / 43mm Puch Maxi / Citta / Vespa

∙ Key.
∙ 9.0mm model.
∙ This part is used for mounting a kickstart pedal or pedal arm.
∙ Universal.

Measurements:

∙ Diameter: 9.0mm.
∙ Length:…

Mounting set Kickstart pedal Puch Magnum X

∙ Mountingset kickstartpedal.
∙ To mount a turnable kickstart pedal.

Suitable for:

∙ Puch Magnum X.
∙ Puch Rough Rider.

Hub Kickstart pedal Puch MC125 / Magnum X

∙ Hub kickstartpedal.
∙ To mount a turnable kickstar pedal.

Suitable for:

∙ Puch Magnum X.
∙ Puch Rough Rider.
∙ Puch MC125.

Identical to Puch article number

364.1.13.341.1

Ball / Spring kickstart pedal Puch M50 / MC125 / Magnum X

∙ Ball / Spring kickstartpedal.
∙ To mount a turnable kickstart pedal.

Suitable for:

∙ Puch Magnum X.
∙ Puch MC125.
∙ Puch M50.

Identical to Puch article…

Spacer Kickstart pedal Puch Z50

∙ Spacer.
∙ Placed in the kickstartpedal.

Measurements:

∙ Outer diameter: 12mm.
∙ Inner diameter: 10mm.
∙ Height: 7.5mm.

Suitable for:

∙ Puch Z50 Engines.

Gear Axle Black Polished Puch Z50

∙ Gearaxle.
∙ With this Gear axle can the shift lever (inner) and the shift arm (outer) be mounted on the engine.
∙ Black Polished, to prevent corrosion.

Suitable for:

∙ Puch Z50…

Gear Axle Chrome Puch Z50

∙ Gearaxle.
∙ With this Gear axle can the shift lever (inner) and the shift arm (outer) be mounted on the engine.
∙ Chromed.

Suitable for:

∙ Puch Z50 Engines.

Original Puch article…

Kickstart Stop Kickstart pedal Puch 4 Gears

∙ Kickstartstop.
∙ Length: 60mm.

Suitable for:

4 Gear Models

∙ Puch DS50-4.
∙ Puch DS50V.
∙ Puch VZ50 (Met kort kickstart-pedal)

Original Puch article number

364.1.13.343.0

Spring Kickstart pedal Puch 4 Gears

∙ Kickstartspring.
∙ Internally engine.

Suitable for:

4 Gear Engines.

∙ Puch Alabama (4 Gears)
∙ Puch Dakota (4 Gears)
∙ Puch DS50 (4 Gears)
∙ Puch VZ50 (4 Gears)
∙ Puch…

Spring Kickstart pedal Puch 3 Gears

∙ Kickstartspring.
∙ Internally engine.

Suitable for:

3 Gear Engines.

∙ Puch DS50.
∙ Puch Alabama.
∙ Puch VZ50.
∙ Puch Dakota.
∙ Puch MC50.

Original Puch article number

∙ 364.1.13.334.1

Cooling cap Rear side Aluminium Puch X30 NG-2AH

∙ Cooling cap rear side.
∙ Aluminium.

Suitable for:

∙ Puch X30 NG-2AH.

Cooling cap Cylinder Aluminium Puch MV / VS / Etc

∙ Head Cooling cap.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Etc.

Identical to Puch article number

364.1.10.065.1

Cooling Cap Cylinder Aluminium Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Head Cooling cap.
∙ Aluminium.

Suitable for:

All Puch Models with Forced cooling.

∙ Puch MS50V.
∙ Puch VS50.
∙ Puch DS50.
∙ Puch MV50.
∙…

Cooling Case Inside Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Coolingcase innerside.
∙ For models with forced cooling.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Tomos 2L.
∙ Tomos 3L.
∙ Etc.

Ignition Grill Weighted Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Ignitiongrill.
∙ Weighted.

Measurements:

∙ Outer diameter: 170mm.
∙ Distance between mounting holes: 148mm.

Suitable for:

∙ Puch MV50.
∙ Puch…

Cooling Case Outside Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Coolingcase Outerside.
∙ For models with forced cooling.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Tomos 2L.
∙ Tomos 3L.
∙ Etc.

Cooling Fan Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Coolingfan.
∙ For models with forced cooling.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Tomos 2L.
∙ Tomos 3L.
∙ Etc.

Identical to Puch…

Cooling Fan Ignition Summer Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Coolingfan / summergrill.
∙ Summer model with big slats.
∙ For models with forced cooling.
∙ Aluminium.

Measurements:

∙ Diameter: 165mm.

Suitable…

Cooling Fan Ignition Winter Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Coolingfan / Wintergrill.
∙ Winter model with small slats.
∙ For models with forced cooling.
∙ Aluminium.

Measurements:

∙ Diameter:…

Covering disk Air grid Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Coveringdisk airgrid.
∙ Can be mounted with matching retaining spring.
∙ For models with forced cooling.
∙ Aluminium.

Suitable for:

∙ Puch MV.
∙ Puch…

Cover Ignition Chrome Puch Monza

∙ Flywheel / Ignitioncover.
∙ With Puch print.
∙ Steel Chromed.

Suitable for:

∙ Puch Monza.

Identical to Puch article number

359.1.10.065.1

Retaining spring Covering disk Air grid Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Retainingspring for Afdekschijf / Stofdeksel.
∙ For models with forced cooling.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙…

Engine cover Plate Model with Crank axle Puch MV50 / VS50 / Florida / Etc

∙ Engine coverplate.
∙ For models with crankaxle.
∙ Aluminium.

Suitable for:

∙ Puch MV50.
∙ Puch VS50.
∙ Puch MS50V.
∙ Puch MS25.
∙ Puch…

Engine cover Plate with Logo Puch VZ50 / MC50 / Dakota

∙ Engine coverplate.
∙ Aluminium.
∙ with Puch logo.

Suitable for:

∙ Puch VZ50.
∙ Puch MC50.
∙ Puch Dakota.

Identical to Puch article number

357.1.10.064.1

Engine cover Plate with Logo Puch VZ50 / Dakota

∙ Engine coverplate.
∙ Aluminium.
∙ with Puch logo.

Suitable for:

∙ Puch VZ50.
∙ Puch VZ50-4.
∙ Puch Dakota (Models from 1969)

Identical to Puch article number

329.3.10.364.1

Engine cover Plate Puch 4 Gears / MV50

∙ Engine coverplate.
∙ Aluminium.

Suitable for:

∙ Puch 4 Gear Models with forced cooling.
∙ Puch MV50 (Models with high placed gear pedal to the leftside)

Engine cover Plate Rearside Plastic Black Puch 4 Gears

∙ Rear Engine coverplate.
∙ Plastic.
∙ Black.

Suitable for:

∙ Puch 4 Gear Models.g
∙ Puch 2 / 3 Gear Models (with adjustments)
∙ Puch MV50X-4.
∙ Puch…

Engine cover Plate Puch M50 Racing / M50 SE / M50 S

∙ Engine coverplate.
∙ Aluminium.
∙ Rearside.
∙ The models with a Crank something needs to be adjusted at the top.

Suitable for:

∙ Puch M50 Racing Kickstart…

Engine cover Plate Original! Puch MS50 / MS50L

∙ Engine coverplate.
∙ Aluminium.
∙ NOS Original Puch part! (may contain slight scratches)

Suitable for:

∙ Puch MS50.
∙ Puch MS50L.

Identical to Puch article number

050.1.1064

Spacer Crank lid M6 x 50mm Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Spacer bolt.
∙ Placed behind the crank lid.

Measurements:

∙ Total length: 50mm.
∙ Length head: 14mm.
∙ Length thin part: 36mm.
∙ Screw thread:…

Spacer Crank lid M6 x 81mm Puch Monza / N50

∙ Spacer bolt.
∙ Placed behind the crank lid.

Measurements:

∙ Total length: 81mm.
∙ Length head: 47mm.
∙ Length thin part: 34mm.
∙ Screw thread: M6.

Suitable for:

∙…

Spacer Crank lid M6 - M5 x 90mm Puch MV / VS / MS / Florida

∙ Spacer bolt.
∙ Placed behind the crank lid.

Measurements:

∙ Total length: 90mm.
∙ Length head: 56mm.
∙ Length thin part: 34mm.
∙ Screw thread: M6 /…

Gear Axle Puch 3 Gears Footgear

∙ Gearaxle.
∙ Footgear.

Suitable for:

3 Gear Engines.

∙ Puch DS (Alabama)

Gear Pedal as Original Puch MV50 / VZ50 / MC50 / Florida

∙ Gearpedal.
∙ Model as original.
∙ Aluminium.
∙ Note! may contain minor damage.

Measurements:

∙ Diameter mounting hole: 13mm.
∙ Length: 120mm -…

Gear Pedal as Original Puch MV50 / VZ50 / MC50 / Florida

∙ Gearpedal.
∙ Model as Original.
∙ Aluminium.
∙ Note! may contain minor damage.

Measurements:

∙ Diameter mounting hole: 13mm.
∙ Length: 120mm -…

Gear Pedal Puch Monza / Grand prix / M50 Racing

∙ Gearpedal.
∙ Aluminium.

Suitable for:​

4 Gear Footgear Engines.

∙ Puch Monza.
∙ Puch Grand prix.
∙ Puch M50 Racing.

O-Ring Axle Gear Pedal 17.3mm x 2.4mm Puch 4 Gears

∙ O Ring Gearpedal axle.
∙ Placed behind the gearpedal.

Measurements:

∙ 17.3mm x 2.4mm.

Suitable for:

Puch 4 Gear Models.

∙ Puch VZ50-4.
∙ Puch DS50-4.
∙ Puch…

Rubber Gear Pedal Black with Logo Puch Footgear

∙ Rubber gearpedal.
∙ Black.
∙ With Puch logo.

Suitable for:

Puch Models with Footgear.

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch Monza.
∙ Puch Ranger.
∙…

Rubber Gear Pedal Black Remake Puch Footgear

∙ Rubber gearpedal.
∙ Black.
∙ Remake.

Suitable for:

Puch Models with Footgear.

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch Monza.
∙ Puch Ranger.
∙ Etc.

Key Kickstartpedal 9mm x 63mm Puch DS / VZ / R / M / SE / MC125 / MC175 / Etc

∙ Kickstartkey / Key kickstart pedal.
∙ For engines with kickstart stop to the outside

Measurements:

∙ Diameter: 9mm.
∙ Length: 63mm.
∙…

Mounting set Cooling cap Engine Puch MV / MS / VS / DS / VZ / Etc

∙ Mountingset for Coolingcap.
∙ As Original.
∙ Including manual!

Suitable for:

Motdels with Forced cooling from ± 1965

∙ Puch DS50.
∙ Puch…

Mounting set Shift housing Puch MV / MS / VZ / MC

∙ Mountingset shifthousing.
∙ Complete set.

Complete set with:

∙ 4x Mounting Studs.
∙ 4x Mounting Nuts.
∙ 4x Mounting Rings.

Suitable for:

2 and 3 Gear Footgear…

Switch Wheel Puch 3 Gears Handgear

∙ Switchwheel.
∙ For mounting the Shift cables.
∙ System with a continuous cable with a central lead.

Suitable for:

∙ Puch 3 Gears Handgear.

Identical to Puch article number

361.1.14.017.8

Switch Wheel Tomos / Puch 3 Gears Handgear

∙ Switchwheel.
∙ For the mounting of the shift cable.
∙ System with 2 separate cables.

Suitable for:

∙ Puch 3 Gears Handgear (the cable out of 1 piece is then replaced by 2…

Shift Lever Pedal Gear set Hand Shift -> Foot Shift Puch / Tomos 2 Gears

∙ Shift lever pedal gear set.
∙ Set to convert hand shift engines to foot shift.
∙ Stainless steel.

Complete set with:

∙ 1x Shift lever.
∙ 1x…

Shift Lever Pedal Gear Hand Shift -> Foot Shift Puch / Tomos 2 Gears

∙ Shift lever pedal gear.
∙ Set to convert hand shift engines to foot shift.
∙ Stainless steel.

Suitable for:

∙ Puch 2 Gear Models.
∙ Tomos 2 Gear Models.

Spoke set Shift Lever Pedal Gear Puch / Tomos 2 Gears

∙ Spoke set.
∙ Suitable for Shift lever Pedal gear.
∙ For the connection between the Shift lever and the select fork.

Complete set wit:

∙ 1x Spoke.
∙ 2x…

Rubber Shift Lever Pedal Gear Puch / Tomos 2 Gears

∙ Rubber.
∙ Suitable for Shift lever pedal gear.

Suitable for:

∙ Puch 2 Gear Models.
∙ Tomos 2 Gear Models.

Hub Kickstart Pedal Left Puch DS50 / VS50DZ / MC50 / VZ50

∙ Hub kickstartpedal.
∙ For mounting on the Leftside.

Suitable for:

∙ Puch DS50.
∙ Puch VS50DZ.
∙ Puch MC50.
∙ Puch VZ50.

Identical to Puch article…

Guide Disk Kickstartspring Puch DS / MC / VZ

∙ Guidedisk kickstart spring.
∙ Suitable for kickstart spring article number: 364.1.13.334.1

Suitable for:

∙ Puch DS.
∙ Puch MC.
∙ Puch VZ.

Identical to Puch article…

Gear Pedal Original! Puch 6 Gears / MV50-X2 / X50-4

∙ Gearpedal.
∙ Model with tapered fit on the axle.
∙ NOS Original Puch part!

Suitable for:

Puch 6-Gear & Later Puch 2 & 4 Gear.

∙ Puch MV50-X2.
∙ Puch…

Gearshift shaft with Select fork 2 Gears Tomos 2L / Puch MV / VS / MS / VZ / Etc

∙ Gearshift Shaft.
∙ Complete with Select fork and replacement bush for the Shifter cable.

Suitable for:

2 Gear Models.

∙ Puch VS50L.
∙…

Chain transmission / Drive 26 Links Puch Monza Grand Prix

∙ Primary transmission / drive chain.
∙ 26 Links.

Suitable for:

∙ Puch Monza, 4 Gears.
∙ Puch Grand Prix, 4 Gears.

Bearing bushing Start Sprocket Aluminium Tomos / Puch 2 / 3 Gears

∙ Bearingbush.
∙ For the start sprocket.
∙ Aluminium.

Measurements:

∙ Outer diameter: 19mm.
∙ Inner diameter: 14mm.
∙ Height: 9.5mm.

Suitable…

Driver Lever Shift Mechaniscm Vertical Puch 2 / 3 Gears

∙ Driverlever.
∙ For Puch Shiftmechanism with vertical elongated opening.

Suitable for:

∙ Puch MV50 2 Gears Footgear.
∙ Puch MV50 3 Gears Footgear.

Driver Lever Shift Mechaniscm Horizontal Puch 2 / 3 Gears

∙ Driverlever.
∙ For Puch Shiftmechanism with horizontal elongated opening.

Suitable for:

∙ Puch MV50 2 Gears Footgear.
∙ Puch MV50 3 Gears Footgear.

Securing plate Primary Sprocket 12mm New Model Tomos / Puch 2 / 3 Gears

∙ Securingplate primary sprocket.
∙ For the nut of the primary gear. (Sprocket with increased ridge)

Measurements:

∙ Outer diameter: 25mm.
∙ Inner…