Are you looking for a clutch, clutch bell or other supplies for your Puch? 
Here you will find our wide range of clutches, clutch bells and clutch parts for all Puch models such as Puch Maxi, Monza, Magnum X, Magnum, MV, VS, MS, DS. Choose from a standard or Race clutch, clutch bells, pressure plates, sprockets, etc. Suitable for your Street, Race and Cross Puch. You will also find all necessities such as clutch parts, bearings, the needed tools and much more!
Have you not found your part or do you have questions about a part? Contact us for a quick response!
Spring set Clutch Blue Puch e50Spring set Clutch Blue Puch e50
∙ Spring set.
∙ Blue model.
∙ For standard and light tuned Puch e50 engines (50cc)
∙ 3.85Kg/mm 1000 / 1500 rpm.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start and kickstart engines.€ 5,90
Spring set Clutch Standard Puch e50Spring set Clutch Standard Puch e50
∙ Spring set.
∙ Standard model.
∙ For standard Puch e50 engines (50cc)
∙ 3.0Kg/mm.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start and kickstart engines.€ 3,95
Clutch bell with Primary drive gear Puch 2 / 3 GearClutch bell with Primary drive gear Puch 2 / 3 Gear
∙ Clutch bell with primary drive gear.
∙ Clutch bell: 16 Teeth.
∙ Primary drive gear: 58 Teeth.
∙ NOS (With some rust marks)
∙ For Puch 2 and 3 gear engines (From…€ 27,95
Spring Holder Clutch bell Puch 2 / 3 GearSpring Holder Clutch bell Puch 2 / 3 Gear
∙ Spring holder clutch bell.
∙ Only for Puch 2 and 3 gear engines with a 2-plate clutch!
Measurements:
∙ Total height: 26mm.
∙ Height of wide profile: 21.5mm.
Suitable…€ 21,95
Cover plate Axle Clutch Tomos 2L / 3L / Puch MV / VS / MS / EtcCover plate Axle Clutch Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Coverplate clutch axle.
∙ Plastic.
Suitable for:
2 & 3 Gear Engines.
∙ Puch VS50.
∙ Puch MS50V.
∙ Puch DS50.
∙ Puch MV50.
∙ Puch X50 (2 & 3 Gear…€ 4,50
Clutch Lever New Model Tomos 2L / 3L / Puch MV / VS / MS / EtcClutch Lever New Model Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Lever clutch.
∙ New model.
∙ Aluminium.
Suitable for:
Puch 2, 3 & 4 Gear Engines.
∙ Puch Z50 2-Speed.
∙ Puch MV50.
∙ Puch MS50(L).
∙ Puch…€ 9,95
Clutch Lever Old Model Tomos 2L / 3L / Puch MV / VS / MS / EtcClutch Lever Old Model Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Lever clutch.
∙ Old model.
∙ Steel.
Suitable for:
Puch 2, 3 & 4 Gear Engines.
∙ Puch Z50 2-Speed.
∙ Puch MV50.
∙ Puch MS50(L).
∙ Puch MS50V.
∙…€ 9,95
Centrering Bolt Tomos 2L / 3L / Puch MV / VS / MS / EtcCentrering Bolt Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Centreringbolt.
∙ Metal.
∙ For the Tension bearing.
Suitable for:
Puch 2, 3 & 4 Gear Engines.
∙ Puch MV50.
∙ Puch MS50L.
∙ Puch MS50V.
∙ Puch M50.
∙…€ 8,95
Torsion spring Axle clutch Small Old Model Tomos 2L / 3L / Puch MV / VS / MS / EtcTorsion spring Axle clutch Small Old Model Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Torsionspring clutch axle.
∙ Small model.
∙ Old model.
∙ Diameter: 10.8mm.
Suitable for:
∙ Puch MS50 (L).
∙ Puch MS50V (From…€ 2,50
Torsion spring Axle clutch Big New Model Puch MV / VS / MS / EtcTorsion spring Axle clutch Big New Model Puch MV / VS / MS / Etc
∙ Torsionspring clutch axle.
∙ Big model.
∙ New model.
∙ Diameter: 15mm.
Suitable for:
∙ Puch MS50V (From 1969)
∙ Puch VS50 (From 1969)
∙ Puch DS50…€ 2,50
Centrering Bolt Puch Z-50 2-SpeedCentrering Bolt Puch Z-50 2-Speed
∙ Centreringbolt.
∙ Plastic.
Suitable for:
∙ Puch Z50 2-Speed.€ 3,95
Torsion spring Axle clutch Puch Maxi e50Torsion spring Axle clutch Puch Maxi e50
∙ Torsionspring clutch axle.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start Engines.
Original Puch article number
350.3.12.022.1€ 5,50
Clutch Lever Puch Maxi e50Clutch Lever Puch Maxi e50
∙ Lever clutch.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start Engines.€ 6,50
Rubber ring Axle clutch Puch Maxi e50Rubber ring Axle clutch Puch Maxi e50
∙ Rubberring clutch lever / clutch axle.
∙ Placed below the clutchlever on the clutch axle.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start Engines.€ 2,95
O-Ring Axle clutch Puch Maxi e50O-Ring Axle clutch Puch Maxi e50
∙ O-Ring clutch axle.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start Engines.
Original Puch article number
350.3.12.022.1€ 0,75
Circlip Axle clutch Puch Maxi e50Circlip Axle clutch Puch Maxi e50
∙ Circlip clutch lever / clutch axle.
∙ For securing the clutch lever on the clutch axle.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start Engines.€ 0,35OFFER!
Clutch cover Kickstart Puch Maxi e50Clutch cover Kickstart Puch Maxi e50
∙ Clutchcover / Kickstartcover.
∙ Kickstart model.
∙ Aluminium.
∙ Bare.
Suitable for:
∙ Puch Maxi e50 Kickstart Engines.€ 57,50 € 49,95OFFER!
Clutch cover Push-start / Pedal-start Puch Maxi e50Clutch cover Push-start / Pedal-start Puch Maxi e50
∙ Clutchcover.
∙ Push-start / Push-start model.
∙ Aluminium.
∙ Bare.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start Engines.€ 34,95
Clutch cover Black Puch Dart / Mini MaxiClutch cover Black Puch Dart / Mini Maxi
∙ Clutchcover.
∙ Black.
∙ Bare.
Suitable for:
∙ Puch Dart.
∙ Puch Mini maxi.€ 59,95OFFER!
Seal Clutch cover Kickstart 16mm x 15mm x 7mm Puch Maxi e50Seal Clutch cover Kickstart 16mm x 15mm x 7mm Puch Maxi e50
∙ Seal Kickstart clutchcover.
Measurements:
∙ 16mm x 15mm x 7mm.
Suitable for:
∙ Puch Maxi e50 Kickstart Engines.€ 3,50
Bolt set Clutch cover Kickstart Allen 5-Pieces Puch Maxi e50Bolt set Clutch cover Kickstart Allen 5-Pieces Puch Maxi e50
∙ Mounting bolt set Kickstart clutchcover.
∙ M6 Allen model.
∙ 5 Pieces.
Suitable for:
∙ Puch Maxi e50 Kickstart Engines.€ 0,75
Bolt set Clutch cover Push-start / Pedal-start Crosshead 4-Pieces Puch Maxi e50Bolt set Clutch cover Push-start / Pedal-start Crosshead 4-Pieces Puch Maxi e50
∙ Mounting bolt set Push-start / Pedal-start clutchcover.
∙ M6 Crosshead model.
∙ 4 Pieces.
Suitable for:
∙ Puch Maxi e50 Push-start /…€ 0,95
Axle Clutch lever 75mm Puch 2 / 3 / Old Model 4 GearsAxle Clutch lever 75mm Puch 2 / 3 / Old Model 4 Gears
∙ Clutchlever axle.
∙ Length: 75mm.
Suitable for:
2 & 3 Gear Models / Old Model 4 Gear Models.
∙ Puch 2, 3 & 4 Gear Models.
∙ Tomos 2, 3 & 4 Gear Models.
∙ Puch M50 Racing.€ 15,95- Axle Clutch lever 85mm New Model 4 Gears Puch Monza / Grand Prix / D50 / M50 Racing
Axle Clutch lever 85mm New Model 4 Gears Puch Monza / Grand Prix / D50 / M50 Racing
∙ Clutchlever axle.
∙ Length: 85mm.
Suitable for:
New Model 4 Gear Models.
∙ Puch Monza.
∙ Puch GrandPrix.
∙ Puch DS50.
∙ Puch M50 Racing.€ 18,95 
Circlip Axle Clutch Tomos / Puch 2 / 3 GearsCirclip Axle Clutch Tomos / Puch 2 / 3 Gears
∙ Circlip for Clutch axle
∙ 6mm.
∙ For Puch 2 and 3 Gear Engines.
∙ To use for clutch axle 75mm and 85mm (look at matching articles below this article)
Suitable for:
∙ Puch…€ 0,45
Axle Clutch lever Hardened Push-start / Pedal-start Puch Maxi e50Axle Clutch lever Hardened Push-start / Pedal-start Puch Maxi e50
∙ Clutchlever axle.
∙ Hardened.
Measurements:
∙ Length: 79.2mm.
∙ Diameter: 13.95mm.
Suitable for:
∙ For Puch Maxi e50 Push-start / Pedal-start…€ 29,95
Spring disc Pressure plate Clutch Puch 2 / 3 / 4 GearSpringdisc Pressure plate Clutch Puch 2 / 3 / 4 Gear
∙ Clutch Spring disc / Pressplate.
Measurements:
∙ Outer diameter: 44mm.
∙ Inner diameter axle hole: 10mm.
∙ Height: 15.4mm.
Suitable for:
∙ Puch 2, 3 & 4 Gear…€ 7,95
Washer Clutch 26mm - 15mm - 1mm Tomos 2L / 3L / Puch 2 / 3 / 4 GearsWasher Clutch 26mm - 15mm - 1mm Tomos 2L / 3L / Puch 2 / 3 / 4 Gears
∙ Washer clutch.
∙ Placed between the Clutch hub and the Clutchbell.
Measurements:
∙ Outer diameter: 26mm.
∙ Inner diameter: 15mm.
∙ Thickness:…€ 3,50
Washer Clutch bell 21mm - 15mm - 1.7mm Tomos 2L / 3L / Puch 2 / 3 / 4 GearsWasher Clutch bell 21mm - 15mm - 1.7mm Tomos 2L / 3L / Puch 2 / 3 / 4 Gears
∙ Washer clutchbell
∙ Placed behind the Clutchbell.
Measurements:
∙ Outer diameter: 21mm.
∙ Inner diameter: 15mm.
∙ Thickness:…€ 3,25
Cover plate Axle Clutch Galvanized Tomos 2L / 3L / Puch MV / VS / MS / EtcCover plate Axle Clutch Galvanized Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Coverplate clutch axle.
∙ Metal, Galvanized.
Suitable for:
2 & 3 Gear Engines.
∙ Puch VS50.
∙ Puch MS50V.
∙ Puch DS50.
∙ Puch MV50.
∙…€ 3,50
Lock washer Clutch / Flywheel M10 Tomos 2L / 3L / Puch MV / VS / MS / EtcLock washer Clutch / Flywheel M10 Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Lockwasher clutch.
∙ M10.
∙ To use for securing of the clutch nut and the flywheel nut.
Suitable for:
∙ Puch MV50
∙ Puch MS50V (Models from…€ 0,75
Clutch bell 18 Teeth High Model 3 Plates Clutch PuchClutch bell 18 Teeth High Model 3 Plates Clutch Puch
∙ Clutchbell.
∙ 18 Teeth
∙ High model for 3 plates clutch.
Suitable for:
∙ Puch Models.€ 74,95
Clutch bell 18 Teeth Low Model 2 Plates Clutch PuchClutch bell 18 Teeth Low Model 2 Plates Clutch Puch
∙ Clutchbell.
∙ 18 Teeth.
∙ Low model for 2 plates clutch.
Suitable for:
∙ Puch Models.€ 69,95
Clutch bell 19 Teeth 4 Gear Model Puch MV50X / MC50 / DS50L / M50 RacingClutch bell 19 Teeth 4 Gear Model Puch MV50X / MC50 / DS50L / M50 Racing
∙ Clutchbell.
∙ 19 Teeth.
∙ High model for 3 plates clutch.
Suitable for:
4 Gear Models.
∙ Puch MV50X.
∙ Puch MC50.
∙ Puch DS50L.
∙ Puch…€ 79,95
Centering cap Clutch Plastic Puch Z50 / 2 / 3 / 4 GearsCentering cap Clutch Plastic Puch Z50 / 2 / 3 / 4 Gears
∙ Centeringcap.
∙ Plastic.
∙ Model with rough screw thread.
Suitable for:
Latest Models Puch 2 and 3 Gear Engines.
∙ Puch MV50 (Latest models)
∙ Puch DS50…€ 4,50
Clutch plate Puch 6 Gears / M50Jet / Monza 6SL / Cobra 6V / Daytona 6VClutch plate Puch 6 Gears / M50Jet / Monza 6SL / Cobra 6V / Daytona 6V
∙ Clutchplate.
∙ A Piece.
Suitable for:
∙ Puch M50Jet.
∙ Puch Monza 6SL.
∙ Puch Cobra 6v.
∙ Puch Daytona 6v.
Original Puch article number
337.1.12.124.1€ 12,95
Bolt Reinforcement plate Clutch M4 x 16mm Allen Puch e50Bolt Reinforcement plate Clutch M4 x 16mm Allen Puch e50
∙ Bolt reinforcementplate clutch.
∙ Bolt for mounting the reinforcement plate on the clutch.
∙ M4 x 16mm.
∙ Allen.
∙ Galvanized.
∙ A Piece.
Suitable for:
∙…€ 0,19
Clutch set Race Tomos A35 / A55Clutch set Race Tomos A35 / A55
∙ Race clutch.
∙ F.M Racing.
∙ CNC Aluminum.
∙ For 1st and 2nd gear.
∙ Suitable for 50CC, 65CC, 70CC en 74CC engines.
∙ Plug&Play with the original 1st and 2nd gear clutch hub (Not…€ 184,95
Puller Clutch / Inner rotor Puch e50Puller Clutch / Inner rotor Puch e50
∙ Puller Clutch / Inner rotor ignition.
∙ For disassembling the clutch of Puch e50 engines.
∙ Can also be used for disassembling an HPI and PVL flywheel rotor.
Suitable for:
∙ Puch…€ 9,95
Puller Clutch / inner rotor BuzzettiPuller Clutch / inner rotor Buzzetti
∙ Clutch puller / inner rotor puller.
∙ To remove the clutch from a Puch e50 engine.
∙ Also to use for removing the inner rotor from a HPI or PVL ignition.
∙ Buzzetti.€ 19,95
