Straight cut gear set Kickstart (with needlebearing)

Complete set for Puch e50 Kickstart engines.

∙ Weight main gear +- 785 gram.
∙ The gear is hardened and mounted on the axle with a woodruff key.
∙ Kickstart clutch bell…

Straight cut gear set Push-start (with needlebearing)

Complete set for Puch e50 Push-start engines.

∙ Weight main gear +- 785 gram.
∙ The gear is hardened and mounted on the axle with a woodruff key.
∙ Push-start clutch…

Straight cut gear set KTM (with needlebearing)

Complete set for Puch e50 engines with a KTM SX50 clutch.

∙ Weight main gear +- 785 gram.
∙ The gear is hardened and mounted on the axle with a woodruff key.
∙ KTM SX50 clutch…

Straight cut gear set Kickstart

Complete set for Puch e50 Kickstart engines.

∙ Weight main gear +- 785 gram.
∙ The gear is hardened and mounted on the axle with a woodruff key.
∙ Kickstart clutch bell.

The benefits of…

Straight cut gear set Push-start

Complete set for Puch e50 Push-start engines.

∙ Weight main gear +- 785 gram.
∙ The gear is hardened and mounted on the axle with a woodruff key.
∙ Push-start clutch bell.

The benefits of…

Straight cut gear set KTM

Complete set for Puch e50 engines with a KTM SX50 clutch.

∙ Weight main gear +- 785 gram.
∙ The gear is hardened and mounted on the axle with a woodruff key.
∙ KTM SX50 clutch bell.

The benefits…

Straight cut main gear (with axle)

∙ Weight:+-785 gram.
∙ The gear is hardened.
∙ Mounted on the axle with a woodruff key.
∙ Can be used with the clutch bell gears or clutch bells from the webshop.

*Click here for more…

Straight cut main gear (without axle)

∙ Weight:+-605 gram.
∙ The gear is hardened.
∙ Can be mounted on the axle with a woodruff key.
∙ Can be used with the clutch bell gears or clutch bells from the webshop.

*Click here…

Kickstart clutch bell (with needlebearing)

∙ The gear is hardened and with a needlebearing.
∙ Can be used with the straight cut main gear from the webshop.

*Click here for more information

Push-start clutch bell (with needlebearing)

∙ The gear is hardened and with a needlebearing.
∙ Can be used with the straight cut main gear from the webshop.

*Click here for more information

KTM clutch bell (with needlebearing)

∙ The gear is hardened and with a needlebearing.
∙ can be used with the straight cut main gear from the webshop.

*Click here for more information

Kickstart clutch bell

∙ The gear is hardened.
∙ Can be used with the straight cut main gear from the webshop.

*Click here for more information

Push-start clutch bell

∙ The gear is hardened.
∙ Can be used with the straight cut main gear from the webshop.

*Click here for more information

KTM clutch bell

∙ The gear is hardened.
∙ Can be used with the straight cut main gear from the webshop.

*Click here for more information

Clutch bell gear(with needlebearing)

∙ The gear is hardened and with a needlebearing.
∙ Can be used with the straight cut main gear from the webshop.
∙ Can be used as a replacement part or to use more clutch bells.

*Click…

Clutch bell gear

∙ The gear is hardened.
∙ Can be used with the straight cut main gear from the webshop.
∙ Can be used as a replacement part or to use more clutch bells.

*Click here for more information

Shim washers clutch bell

12 shim washers:

15*21*0.1 (frontside)
15*21*0.2 (frontside)
15*21*0.3 (frontside)
15*21*0.5 (frontside)
15*21*1.0 (frontside)
15*21*1.5 (frontside)
17*24*0.1 (backside)
17*24*0.2 (backside)
17*24*0.3…

Needlebearing clutch bell

Replacement part for the VDM clutch bells and gears with needlebearing from the webshop.​
This bearing doesnt fit in a original clutch bell.
(Photo 2 is a example photo)

Bearing bush clutch bell

For Puch e50 clutch bells.
Brass.
A piece.
(Photo 2 is a example photo)

Circlip clutch side frontside

15mm.

Circlip clutch side backside

17mm.

Circlip front sprocket