Item 2 of 461

​Tank Cure coating set 450 Gram

SKU: FD0002
€ 25,95 (including VAT)
This item is sold out.

The delivery time is 1 day.

Tank Cure coating set 450 Gram

  • Tank Cure coating set.
  • 450 Gram (Enough for a tank up to 20 liters)
  • 300 Gram Coating+150 Gram Hardener.

Solvent free two component epoxy coating with excellent fuel and oil resistance. Can be used on the inside of metal tanks In order to guarantee a good result treat the tank firts with Tank Cure Cleaner and Tank Cure Deruster.
Mix the two components thoroughly with each other and fill the tank with it. Then close the filler opening. Turn the tank slowly in all directions so that the coating can reach all points on the inside. Do this for 15 minutes and then drain the excess fluid through the filler opening. After a minimum of 7 days curing at room temperature, the tank can be used again.

  • The mixing ratio of base / hardener by weight is 100:50.
  • The pot life at 20 ° C is approximately 15 minutes.
  • Minimum application temperature is 20 º C.
  • A set of 450 grams is suitable for the treatment of moped tank of up to 15 to 20 liters.
© 2018 - 2024 VDMPuchParts | sitemap | rss