Customers also bought

• 
  Revision kit 4 bearings (Old model)

  Revision kit 4 bearings (Old model)
  
  Complete revision bearing/seals kit for Puch e50 engines with a old model crankshaft.
  
  ∙ 3x bearing 6203C3 NTN.
  ∙ 1x bearing 6203 NR.
  ∙ 2x 17/40/7 seal.
  ∙ 1x 22/40/7 seal.
  
  ∙…

  € 32,⁹⁵

  Order
• 
  Revision kit 3 bearings (Old model)

  Revision kit 3 bearings (Old model)
  
  Complete revision bearing/seals kit for Puch E50 engines with a old model crankshaft.
  
  ∙ 2x bearing 6203C3 NTN.
  ∙ 1x bearing 6203 NR.
  ∙ 2x 17/40/7 seal.
  ∙ 1x 22/40/7 seal.
  
  ∙…

  € 27,⁹⁵

  Order
• 
  Engine bolts kit

  Engine bolts kit
  
  ∙ 13x M6 inbus bolts.
  ∙ (Photo 2 is a example photo)

  € 3,⁹⁵

  Order
• 
  Bearing / seal set crankshaft (Old model) Puch Maxi e50

  Bearing / seal set crankshaft (Old model) Puch Maxi e50
  
  Crankshaft bearing / seal set for Puch e50 old model crankshaft.
  
  ∙ 1x NTN Bearing 6203C3.
  ∙ 1x NTN Bearing 6203 NR.
  ∙ 1x 17/40/7 Seal.
  ∙ 1X 22/40/7 Seal.
  
  Suitable…

  € 17,⁹⁵

  Order
• 
  Revision set complete 4-Bearing push-start (Old model)

  Revision set complete 4-Bearing push-start (Old model)
  
  Complete revision bearing/seal set for Puch e50 push-start engines 4-Bearing with a old model crankshaft.
  
  ∙ Liquid gasket (Red)
  ∙ ATF llD engine oil Eurol (250ml)
  ∙…

  € 57,⁹⁵

  Order
• 
  Clutch 3 segments Push-start / Pedal-start Puch e50

  Clutch 3 segments Push-start / Pedal-start Puch e50
  
  ∙ Clutch.
  ∙ Push-start / Pedal-start model.
  ∙ Model as original.
  ∙ 3 Segments.
  
  Suitable for:
  
  ∙ Puch Maxi e50 Push-start / Pedal-start engines.

  € 39,⁹⁵

  Order

• Top Product!

  
  Gilardoni / Italkit cylinder set 74cc (47mm) Puch Maxi

  Gilardoni / Italkit cylinder set 74cc (47mm) Puch Maxi∙ Gilardoni / Italkit cylinder set 74cc (47mm)
  ∙ 1 of the fastest cylinder on the market!
  
  Data:
  
  ∙ Cylinder capacity: 74cc.
  ∙ Bore: 47mm.
  ∙ Piston pin: 12mm.
  ∙…

  € 299,⁰⁰

  Order
• 
  Stud crank case / cylinder 120mm M8 > M6 Puch

  Stud crank case / cylinder 120mm M8 > M6 Puch
  
  ∙ Stud.
  ∙ To be used for mounting the cylinder on the engine.
  ∙ If the screw thread in the engine is broken, you can easily solve this with these adapter studs!
  ∙ Hardened…

  € 2,⁸⁵

  Order
• 
  Piston pin clip set (12mm)

  Piston pin clip set (12mm)
  
  ∙ 12mm.
  ∙ 2 Pieces.

  € 1,²⁰

  Order
• 
  VDM KTM SX50 clutch Puch e50

  VDM KTM SX50 clutch Puch e50
  
  ∙ VDM KTM SX50 clutch.
  ∙ Top-Qaulity!
  ∙ Plug&play with the sprocket and clutch bell from the webshop in Puch e50 kickstart engines.
  ∙ The clutch can be used in Puch e50 push-start engines but…

  € 298,⁰⁰

  Order