Key kickstart / pedals 9.5mm / 43mm Puch Maxi / Citta / Vespa

Customers also bought

• 
  Pedal crank shaft arm set (Chrome Puch Maxi)

  Pedal crank shaft arm set (Chrome Puch Maxi)
  
  ∙ For Puch Maxi.
  ∙ Chrome.
  ∙ Total length:155mm.
  ∙ outward clearance:40mm.
  ∙ Pedal key hole:9.5mm.
  ∙ Right and Left turning thread.

  € 24,⁹⁵

  Order
• 
  Crank axle with sprocket Chrome 210mm x 16mm x 28 Teeth Puch Maxi

  Crank axle with sprocket Chrome 210mm x 16mm x 28 Teeth Puch Maxi
  
  ∙ Crank axle with sprocket.
  ∙ Chrome.
  ∙ 28 Teeth.
  
  Measurements:
  
  ∙ Diameter axle: 16mm.
  ∙ Total length: 210mm.
  ∙ Length axle long side: 165mm.
  ∙…

  € 19,⁵⁰

  Order
• 
  Key kickstart / pedals 9.0mm / 43mm Puch Maxi / Citta / Vespa

  Key kickstart / pedals 9.0mm / 43mm Puch Maxi / Citta / Vespa
  
  ∙ Key.
  ∙ 9.0mm model.
  ∙ This part is used for mounting a kickstart pedal or pedal arm.
  ∙ Universal.
  
  Measurements:
  
  ∙ Diameter: 9.0mm.
  ∙ Length:…

  € 1,²⁵

  Order
• 
  Spring Kickstart Cover Puch Maxi e50

  Spring Kickstart Cover Puch Maxi e50
  
  ∙ Kickstartspring.
  ∙ This spring is mounted in the kickstart clutch cover. and ensures that the kickstart pedal comes back up after starting.
  
  Note! Photo 2 is a example photo.
  
  Suitable…

  € 4,⁹⁵

  Order
• 
  Spring holder Kickstart cover Plastic Puch Maxi e50

  Spring holder Kickstart cover Plastic Puch Maxi e50
  
  ∙ Kickstart springholder / kickstartring.
  ∙ This spring holder is mounted in the kickstart clutch cover. and ensures that the spring remains in position.
  ∙ Plastic.
  
  Note!…

  € 9,⁵⁰

  Order
• 
  Shim washer Kickstart Cover 14mm x 10mm x 0.5mm Puch Maxi e50

  Shim washer Kickstart Cover 14mm x 10mm x 0.5mm Puch Maxi e50
  
  ∙ Shimwasher kickstart clutchcover.
  ∙ Placed on both Sprockets that fall into the crankcase.
  ∙ A Piece.
  
  Measurements:
  
  ∙ 14mm x 10mm x 0.5mm.
  
  Note! Photo 2…

  € 0,⁸⁵

  Order
• 
  Mounting bolt set M6 kickstart conversion set 5-Pieces Puch e50

  Mounting bolt set M6 kickstart conversion set 5-Pieces Puch e50
  
  ∙ Mounting bolt set.
  ∙ Set to assemble a kickstart conversion kit on a Puch e50 engine.
  ∙ 5-Pieces.
  
  Suitable for:
  
  ∙ Puch e50 Push-start / Pedal-start engine.

  € 1,²⁵

  Order
• 
  Rubber Kickstart pedal with Puch Print Puch Maxi e50 / ZA50 / Z50

  Rubber Kickstart pedal with Puch Print Puch Maxi e50 / ZA50 / Z50
  
  ∙ Rubber kickstartpedal.
  ∙ Model with Puch print / logo.
  
  Measurements:
  
  ∙ Length: 65mm.
  ∙ Inner diameter: 8mm.
  ∙ Outer diameter: 15mm.
  
  Suitable…

  € 3,⁹⁹

  Order