Shim Washer Clutch bell Front side Puch e50
Measurements:
Suitable for:
Shim Washer Clutch bell Rear side Puch e50
∙ Shim washer.
∙ Rear side (Behind clutch bell)
∙ Set for adjusting the clutch bell of Puch e50 engines and for the kickstart axle.
∙ A Piece.
Measurements:
∙ Outer diameter:…
Cirlip Front side Clutch bell Puch e50
∙ Circlip.
∙ Front side (Clutch side)
∙ This part secures the clutch bell on the crankshaft of a Puch e50 Push-start / Pedal-start and Kickstart engines.
∙ A…
Cirlip Rear side Clutch bell Puch e50
∙ Circlip.
∙ Rearside (Behind clutch bell)
∙ This part secures the clutch bell on the crankshaft of a Puch e50 Push-start / Pedal-start and Kickstart engines.
∙ A…
Bearing Bush Brass Clutch bell Puch e50
∙ Bearing bush.
∙ Brass.
∙ Replacement part for the clutch bells and gears with bearing bush from the shop.
∙ Picture 2 is a example picture of the bearing bush in a clutch…
Gasket set Cylinder 65cc (43.5mm) Polini Puch Maxi
∙ Gasketset / Topset cylinder.
∙ Suitable for 65cc (43.5mm) Polini Cylinder.
Complete set with:
∙ 1x Base gasket.
∙ 1x Head gasket.
∙ 2x Inlet reed valve gasket.
∙…
Oil Fill plug / Drain plug set Puch Maxi e50
∙ Oilfill / Drainplug set.
Complete set with:
∙ 1x Oil fill plug.
∙ 1x Fibre washer Oil fill plug.
∙ 1x Oil Drain plug.
∙ 1x Fibre washer Drain plug.
Suitable for:
∙…
Top-Qaulity!
VDMRacing Bearing Bush Clutch bell Top-Qaulity! Puch e50
∙ Bearing bush.
∙ Replacement part for the clutch bells and gears with bearing bush from the shop.
∙ Top-Qaulity!
∙ VDMRacing!
Suitable for:
∙ Puch Maxi e50…
Jet Bing carburetor 3.5mm (44-110)
∙ Jet / Nozzle.
∙ Model as original.
∙ Thread: 3.5mm.
∙ Available sizes: 44 till 110.
∙ Suitable for Bing 10mm, 12mm and 15mm original carburetors.
∙ Also fit in some replica…
Links
www.vdmpuchparts.com
www.vdmpuchparts.de
www.vdmpuchparts.nl
VDMPuchParts
Opperkoatsterwei 23
9288GJ Kootstertille
The Netherlands
Follow us on social media and stay informed of the latest news!
INFO@VDMPUCHPARTS.COM
CONTACT US
