Needlebearing clutch bell old model
Pay attention! This bearing doesnt fit in a original clutch bell!
VDM Straight cut gear set (With Needlebearing)
Complete set for Puch e50 engines.
∙ Weight main gear +- 785 gram.
∙ The gear is hardened and mounted on the axle with a woodruff key.
∙ Clutch bell gear with…
VDM Straight cut gear clutch bell gear (With Needlebearing)
∙ The gear is hardened and with a needlebearing.
∙ Can be used with the straight cut main gear from the webshop.
∙ Can be used as a replacement part or to use more…
Straight cut gear set KTM (with needlebearing)
Complete set for Puch e50 engines with a KTM SX50 clutch.
∙ Weight main gear +- 785 gram.
∙ The gear is hardened and mounted on the axle with a woodruff key.
∙ KTM SX50 clutch…
Shim washer assortiment set (30 Pieces)
Shim washer assortiment set for the kickstart gear and for asjusting the clutch bell.
Complete kit with:
∙ 2x Shim washer kickstart gear.
∙ 2x Shimring 15*21*0.2 (Frontside)
∙ 5x…
Bearing bush (Clutch bell)
∙ For Puch e50 clutch bells.
∙ Brass.
∙ A piece.
∙ (Photo 2 is a example photo)
VDM Straight cut gear set KTM
Complete set for Puch e50 engines with a KTM SX50 clutch.
∙ Weight main gear +- 785 gram.
∙ The gear is hardened and mounted on the axle with a woodruff key.
∙ KTM SX50 clutch bell.
The…
